HP Elite Slice Manuel utilisateur

Getting Started

HP Elite Slice

L.P.

Windows is either a registered trademark or

trademark of Microsoft Corporation in the

United States and/or other countries.

The information contained herein is subject to

change without notice. The only warranties for

HP products and services are set forth in the

express warranty statements accompanying

such products and services. Nothing herein

should be construed as constituting an

additional warranty. HP shall not be liable for

technical or editorial errors or omissions

contained herein.

Second Edition: July 2018

First Edition: June 2016

Document Part Number: 904511-002

Product notice

This user guide describes features that are

common to most models. Some features may

not be available on your computer.

Not all features are available in all editions or

versions of Windows. Systems may require

upgraded and/or separately purchased

hardware, drivers, software or BIOS update to

take full advantage of Windows functionality.

Windows 10 is automatically updated, which is

always enabled. ISP fees may apply and

additional requirements may apply over time

for updates. Go to http://www.microsoft.com

for details.

To access the latest user guides, go to

http://www.hp.com/ support, and follow the

instructions to nd your product. Then select

User Guides.

Software terms

By installing, copying, downloading, or

otherwise using any software product

preinstalled on this computer, you agree to be

bound by the terms of the HP End User License

Agreement (EULA). If you do not accept these

license terms, your sole remedy is to return the

entire unused product (hardware and software)

within 14 days for a full refund subject to the

refund policy of your seller.

For any further information or to request a full

refund of the price of the computer, please

contact your seller.

About This Book

WARNING! Text set o in this manner indicates that failure to follow directions could result in bodily harm or

loss of life.

CAUTION: Text set o in this manner indicates that failure to follow directions could result in damage to

equipment or loss of information.

NOTE: Text set o in this manner provides important supplemental information.

iii

iv About This Book

Table of contents

Getting started ................................................................................................................................................. 1

Activating and customizing the software .............................................................................................................. 1

Activating the Windows Operating System ......................................................................................... 1

Downloading Windows updates .......................................................................................................... 1

Customizing the monitor display ........................................................................................................ 1

Turning o the computer ....................................................................................................................................... 2

Finding more information ...................................................................................................................................... 2

Important BIOS settings ........................................................................................................................................ 2

If you encounter issues .......................................................................................................................................... 3

Performing basic troubleshooting ...................................................................................................... 3

Visual inspection: No boot, no power, no video ................................................................ 3

Blink or beep codes: Interpreting POST diagnostic rear panel LEDs and

audible codes .................................................................................................................... 4

Using HP PC Hardware Diagnostics Windows ................................................................... 4

Downloading HP PC Hardware Diagnostics Windows ...................................................... 4

Using HP PC Hardware Diagnostics UEFI .......................................................................... 5

Downloading HP PC Hardware Diagnostics (UEFI) to a USB device ............... 5

Before you call for support ............................................................................................... 6

Backing up, restoring, and recovering in Windows 10 ..................................................... 7

Creating recovery media and backups ........................................................... 7

Using Windows tools ...................................................................................... 7

Restore and recovery ...................................................................................... 7

Getting started

Activating and customizing the software

NOTE: On select products, the computer does not boot into Windows 10. To do this, you must exit the

current system. For more information, see https://docs.microsoft.com/en-us/skypeforbusiness/manage/

skype-room-systems-v2/room-systems-v2-operations#AdminMode.

Additional information is available in online help after you activate the operating system.

NOTE: Be sure that there is a 10.2 cm (4 inch) clearance at the back of the unit and above the monitor to

permit the required airow.

Activating the Windows Operating System

The rst time you turn on the computer, the operating system is set up and activated automatically. This

process takes about 5 to 10 minutes. Carefully read and follow the instructions on the screen to complete the

activation.

We recommend that you register your computer with HP during operating system set up so you can receive

important software updates, facilitate support questions, and sign up for special oers. You can also register

your computer with HP using the Register with HP app on the Start screen.

CAUTION: After the activation process has begun, DO NOT TURN OFF THE COMPUTER UNTIL THE PROCESS IS

COMPLETE. Turning o the computer during the activation process may damage the software that runs the

computer or prevent its proper installation.

Downloading Windows updates

Microsoft may release updates to the operating system. To help keep the computer running optimally, HP

recommends checking for the latest updates during the initial installation and periodically throughout the life

of the computer.

Run Windows Update as soon as possible after you set up your computer.

1. From the taskbar, type Windows Update, and then from the Search window, select Check for

updates.

2. Select Update & recovery, and then select Check for updates.

3. Run Windows Update monthly thereafter.

– or –

1. Select the question mark icon in the taskbar.

2. Select My notebook, select the Updates tab, and then select Check for updates and messages.

3. Follow the on-screen instructions.

Customizing the monitor display

If you wish, you can select or change the monitor refresh rates, screen resolution, color settings, font sizes,

and power management settings.

Activating and customizing the software 1

For more information, refer to the online documentation provided with the graphics controller utility or the

documentation that came with your monitor.

▲Right-click on the Windows desktop, then select Personalize or Display Settings to change display

settings.

– or –

Select the Start icon, select Settings, and then select Personalization or System.

Turning o the computer

To properly turn o the computer, shut down the operating system software.

▲Select the Start icon, select the Power icon, and then select Shut down.

Finding more information

NOTE: Some or all of the following documents are available on the computer hard drive.

●Getting Started—Helps you connect the computer and peripheral devices and set up factory-provided

software; also includes basic troubleshooting information should you encounter any problems during

initial startup.

●Hardware Reference Guide—Provides an overview of the product hardware, as well as instructions for

upgrading this series of computers; includes information on RTC batteries, memory, and power supply.

●Maintenance and Service Guide (English only)—Provides information on parts removal and replacement,

troubleshooting, Desktop Management, setup utilities, safety, routine care, connector pin assignments,

POST error messages, diagnostic indicator lights and error codes.

●Regulatory, Safety and Environmental Notices—Provides safety and regulatory information that ensures

compliance with U.S., Canadian, and various international regulations.

Important BIOS settings

The following settings in BIOS require that you shut down the computer for proper conguration. The settings

are not enabled by default.

To make sure these settings function properly, enable the setting in BIOS and turn o the computer.

NOTE: If the computer does not go through a normal shutdown, the enabled settings will not work.

S5 Maximum Power Savings. When set to “enable,” the computer is congured to be under 0.5 W when in the

o state. To accomplish this lower power level, most wake sources are disabled and some auxiliary power is

turned o.

Power On from Keyboard. When set to “enable,” the two rear type A USB ports remain powered when the

system is o (S4 or S5). Press any key on the keyboard to turn the computer on.

NOTE: This feature is not available when S5 Maximum Power Savings is enabled.

Power On from Cover Buttons. When set to “enable,” the buttons on the Collaboration Cover can power on

the computer.

NOTE: This feature is not available when S5 Maximum Power Savings is enabled.

This feature requires that Power On from Keyboard is set to “enable.”

2 Getting started

When Power On from Keyboard or Power On from Cover Buttons is enabled, After Power Loss is changed to

Power On. This means that if the computer loses power, when the power comes back on, the computer

automatically turns on. The computer can then be shut down normally to restore the original power-on

setting.

If you encounter issues

There are several means to diagnose and resolve potential issues. HP provides several proprietary

diagnostics tools but recommends a sequential troubleshooting approach that addresses the most basic root

cause to the more complex. Steps include:

●Visual inspection

●Blink or beep codes

●HP PC Hardware Diagnostics

●HP Support

●System restore

●System recovery

Performing basic troubleshooting

You can nd troubleshooting information in the comprehensive Maintenance and Service Guide (English only)

available under the reference library at http://www.hp.com/support. Select your country and language, select

Product Support & Troubleshooting, enter the model number of the computer, and select Search.

Visual inspection: No boot, no power, no video

If you encounter problems with the computer, monitor, or software, see the following list of general

suggestions before taking further action:

●Check that the computer and monitor are plugged into a working electrical outlet.

●Check to see that the computer is turned on and the power light is on.

●Check to see that the monitor is turned on and the monitor light is on.

●Turn up the brightness and contrast controls of the monitor if the monitor is dim.

●If the system does not boot, press and hold any key. If the system beeps, then the keyboard is operating

correctly.

●Check all cable connections for loose connections or incorrect connections.

●Wake the computer by pressing any key on the keyboard or pressing the power button. If the system

remains in sleep mode, shut down the computer by pressing and holding the power button for at least

four seconds. Then press the power button again to restart the computer. If the system will not shut

down, unplug the power cord, wait a few seconds, and then plug it in again. The computer will restart if

automatic start on power loss is set in Computer Setup. If the computer does not restart, press the

power button.

●Recongure your computer after installing a non-Plug and Play expansion board or other option.

●Be sure that all the needed device drivers have been installed. For example, if you are using a printer,

you need a driver for that printer model.

If you encounter issues 3

●Remove any bootable media (CD/DVD or USB device) from the system before turning it on.

●If you have installed an operating system other than the factory-installed operating system, check to be

sure that it is supported on the system.

CAUTION: When the computer is plugged into an AC power source, there is always voltage applied to the

system board. To reduce the risk of system board or component damage, always disconnect the power cord

from the power source before opening the computer.

Blink or beep codes: Interpreting POST diagnostic rear panel LEDs and audible codes

If you see ashing LEDs on the rear of the computer or if you hear beeps, see the Maintenance and Service

Guide (English only) for interpretation and recommended action.

Using HP PC Hardware Diagnostics Windows

HP PC Hardware Diagnostics Windows is a Windows-based utility that allows you to run diagnostic tests to

determine whether the computer hardware is functioning properly. The tool runs within the Windows

operating system in order to diagnose hardware failures.

If HP PC Hardware Diagnostics Windows is not installed on your computer, rst you must download and install

it. To download HP PC Hardware Diagnostics Windows, see Downloading HP PC Hardware Diagnostics

Windows on page 4

After HP PC Hardware Diagnostics Windows is installed, follow these steps to access it from HP Help and

Support.

1. To access HP PC Hardware Diagnostics Windows from HP Help and Support:

a. Select the Start button, and then select HP Help and Support.

b. Right-click HP PC Hardware Diagnostics Windows, select More, and then select Run as

administrator.

2. When the tool opens, select the type of diagnostic test you want to run, and then follow the on-screen

instructions.

NOTE: If you need to stop a diagnostic test at any time, select Cancel.

3. When HP PC Hardware Diagnostics Windows detects a failure that requires hardware replacement, a 24-

digit Failure ID code is generated. For assistance in correcting the problem, contact support, and then

provide the Failure ID code.

Downloading HP PC Hardware Diagnostics Windows

●The HP PC Hardware Diagnostics Windows download instructions are provided in English only.

●You must use a Windows computer to download this tool because only .exe les are provided.

To download HP PC Hardware Diagnostics Windows, follow these steps:

1. Go to http://www.hp.com/go/techcenter/pcdiags. The HP PC Diagnostics home page is displayed.

2. Select Download HP Diagnostics Windows, and then select a location on your computer or a USB ash

drive.

The tool is downloaded to the selected location.

4 Getting started

Autres manuels pour Elite Slice

Table des matières

Autres manuels HP Ordinateur de bureau

HP Pavilion w1000 - Desktop PC Manuel utilisateur

HP A7L26UT#ABA Manuel utilisateur

HP Compaq Presario Manuel utilisateur

HP Compaq Presario Fiche technique

HP Pavilion x360 15 Manuel

HP b2600 Manuel

HP Pavilion t372k Manuel utilisateur

HP AlphaServer DS25 Instructions d'utilisation

HP dx2280 - Microtower PC Instructions d'utilisation

HP Pro 3010 - Microtower PC Manuel utilisateur

HP Pavilion a5000 - Desktop PC Comment utiliser

HP B160L Manuel

HP Compaq dx5150 SFF Manuel d'utilisation et d'entretien

HP ENVY Phoenix 850 Instructions d'installation

HP Visualize c200 - Workstation Manuel utilisateur

HP Pavilion a120 Instructions d'installation

HP Compaq GX5000T CTO Manuel utilisateur

HP Pavilion Elite e9240f Manuel

HP Pavilion a210 Manuel utilisateur

HP TouchSmart IQ820 Mode d’emploi

HP Z220 SFF Series Manuel utilisateur

HP Compaq dc5750 Series Instructions d'utilisation

HP LaserJet 9000 Mode d’emploi

HP EliteDesk 705 G3 Manuel d'utilisation et d'entretien

Manuels Ordinateur de bureau populaires d'autres marques

Asus

Asus E210 Series Manuel utilisateur

Dell

Dell Inspiron 600m Manuel utilisateur

Dell

Dell Inspiron 3662 Manuel utilisateur

TotalFlow

TotalFlow uFLO Manuel utilisateur

Logitech

Logitech MK320 Manuel utilisateur

Dell

Dell XPS 730 H2C Manuel utilisateur

Sony

Sony Vaio Series Manuel utilisateur

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuel utilisateur

Alto

Alto MD 250 Manuel utilisateur

Lenovo

Lenovo ThinkCentre Edge 72 Manuel

Lenovo

Lenovo ThinkStation D20 Manuel

Arbor Technology

Arbor Technology FPC-7800 Series Manuel utilisateur

Sony

Sony VAIO VGX-TP1 Series Manuel utilisateur

Asus

Asus Eee Box B204 Manuel utilisateur

Dell

Dell Optiplex 9010 All In One Manuel utilisateur

Everex

Everex eXplora Manuel utilisateur

Lenovo

Lenovo ThinkCentre M75e Manuel utilisateur

Dell

Dell Alienware Area-51 R4 Manuel utilisateur