HP Dx7400 - Microtower PC Manuel utilisateur

Computer Setup (F10) Utility Guide

HP Compaq dx7400 Series

Development Company, L.P. The

information contained herein is subject to

change without notice.

Microsoft, Windows, and Windows Vista are

either trademarks or registered trademarks

of Microsoft Corporation in the United States

and/or other countries.

The only warranties for HP products and

services are set forth in the express warranty

statements accompanying such products

and services. Nothing herein should be

construed as constituting an additional

warranty. HP shall not be liable for technical

or editorial errors or omissions contained

herein.

This document contains proprietary

information that is protected by copyright. No

part of this document may be photocopied,

reproduced, or translated to another

language without the prior written consent of

Hewlett-Packard Company.

Computer Setup (F10) Utility Guide

HP Compaq dx7400 Series

First Edition (July 2007)

Document Part Number: 448658-001

About This Book

This guide provides instructions on how to use Computer Setup. This tool is used to reconfigure and

modify computer default settings when new hardware is installed and for maintenance purposes.

WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily

harm or loss of life.

CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage

to equipment or loss of information.

NOTE: Text set off in this manner provides important supplemental information.

ENWW iii

iv About This Book ENWW

Table of contents

1 Computer Setup (F10) Utilities

Using Computer Setup (F10) Utilities ................................................................................................... 1

Computer Setup—System Information ................................................................................................. 3

Computer Setup—Main ........................................................................................................................ 4

Computer Setup—Advanced ................................................................................................................ 6

Computer Setup—Boot ........................................................................................................................ 8

Computer Setup—PC Health ............................................................................................................... 9

Computer Setup—Exit ........................................................................................................................ 10

2 Recovering the Configuration Settings

Backing Up the CMOS ....................................................................................................................... 12

Restoring the CMOS .......................................................................................................................... 13

ENWW v

vi ENWW

1 Computer Setup (F10) Utilities

Use Computer Setup (F10) Utility to do the following:

●Change factory default settings.

●Set the system date and time.

●Set, view, change, or verify the system configuration, including settings for processor, graphics,

memory, audio, storage, communications, and input devices.

●Modify the boot order of bootable devices such as hard drives, diskette drives, optical drives, or

USB flash media devices.

●Restrict a device from booting the unit.

●Run hard drive self-tests.

●View CPU and system temperatures.

●Enter the Asset Tag or property identification number assigned by the company to this computer.

●Establish a supervisor password that controls access to Computer Setup (F10) Utility and the

settings described in this section.

●Secure integrated I/O functionality, including the serial, USB, or parallel ports, audio, or embedded

NIC, so that they cannot be used until they are unsecured.

●Enable or disable removable media boot ability.

●Enable or disable legacy diskette write ability (when supported by hardware).

Using Computer Setup (F10) Utilities

Computer Setup can be accessed only by turning the computer on or restarting the system. To access

the Computer Setup Utilities menu, complete the following steps:

1. Turn on or restart the computer.

2. As soon as the computer is turned on, press F10 when the monitor light turns green to enter

Computer Setup. Press Enter to bypass the title screen, if necessary.

NOTE: If you do not press F10 at the appropriate time, you must restart the computer and again

press F10 when the monitor light turns green to access the utility.

3. The Computer Setup Utility screen is divided into menu headings and actions.

Six menu headings appear on the Computer Setup Utility screen:

●System Information

●Main

ENWW Using Computer Setup (F10) Utilities 1

●Advanced

●Boot

●PC Health

●Exit

Use the arrow keys to select the appropriate heading, then press Enter. Use the arrow (up and

down) keys to select the option you want, then press Enter. To return to the previous screen, press

Esc.

4. To apply and save changes, press the F10 key.

If you have made changes that you do not want applied, press the F9 key to exit without saving.

To load optimized default values, press the F7 key.

CAUTION: Do NOT turn the computer power OFF while the ROM is saving the Computer Setup (F10)

changes because the CMOS could become corrupted. It is safe to turn off the computer only after exiting

the F10 Setup screen.

Table 1-1 Computer Setup (F10) Utility Main Menu

Heading Table

System Information Table 1-2 Computer Setup—System Information on page 3

Main Table 1-3 Computer Setup—Main on page 4

Advanced Table 1-4 Computer Setup—Advanced on page 6

Boot Table 1-5 Computer Setup—Boot on page 8

PC Health Table 1-6 Computer Setup—PC Health on page 9

Exit Computer Setup—Exit on page 10

2 Chapter 1 Computer Setup (F10) Utilities ENWW

Computer Setup—System Information

NOTE: Support for specific Computer Setup options may vary depending on the hardware

configuration.

Table 1-2 Computer Setup—System Information

Option Description

Product Name (view only)

SKU Number (view only)

Processor Type (view only)

Processor Speed (view only)

System ROM (view only)

Cache Size (view only)

Memory Size (view only)

Integrated MAC (view only)

UUID (view only)

System Serial # (view only)

Asset Tracking

Number

(view only)

ENWW Computer Setup—System Information 3

Computer Setup—Main

NOTE: Support for specific Computer Setup options may vary depending on the hardware

configuration.

Table 1-3 Computer Setup—Main

Option Description

Date (mm:dd:yy) Allows you to set system date.

Time (hh:mm:ss) Allows you to set system time.

SATA Port 1

SATA Port 2

SATA Port 3

SATA Port 4

For each, allows you to:

●run HDD self-test for selected channel:

◦SMART Status Check

◦HDD Short Self-Test

◦HDD Extended Self-Test

●auto-detect HDD size and head

●set IDE drive on selected channel to:

◦None

◦Auto

●set access mode on selected channel to:

◦Large

◦Auto

●view:

◦Firmware

◦Capacity

◦Cylinder

◦Head

◦Precomp

◦Landing Zone

◦Sector

Onboard FDC Controller Disables/enables the floppy disk controller.

Drive A Allows you to set Drive A to:

●None

●1.44M, 3.5 in.

4 Chapter 1 Computer Setup (F10) Utilities ENWW

Autres manuels pour dx7400 - Microtower PC

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HP Ordinateur de bureau

HP Elite 7200 - Microtower PC Manuel utilisateur

HP Compaq dx2000 MT Manuel utilisateur

HP ProOne 400 G1 Manuel utilisateur

HP Xw4200 - Workstation - 1 GB RAM Manuel utilisateur

HP Pavilion d4000 - Desktop PC Manuel

HP s3700f - Pavilion - Slimline Manuel d'utilisation

HP Xw8400 - Workstation - 4 GB RAM Manuel d'utilisation et d'entretien

HP Compaq Presario Guide de démarrage rapide

HP TouchSmart 300-1025 Manuel utilisateur

HP Brio 8000 Manuel utilisateur

HP 205 G2 AiO Business Instructions de montage

HP dc72 - Blade Workstation Client Instructions d'installation et d'entretien

HP Z220 Manuel utilisateur

HP Presario All-in-One CQ1-2000 Fiche technique

HP Z400 - Workstation Manuel

HP Xw4300 - Workstation - 2 GB RAM Manuel utilisateur

HP Thin Client T740 Manuel d'utilisation et d'entretien

HP VR Backpack G2 Manuel

HP Model 748 - VME Workstation Guide de référence

HP Kayak XU Manuel utilisateur

HP EliteDesk 800 G5 Instructions d'installation

HP Compaq Presario Fiche technique

HP Pavilion 9690C Manuel utilisateur

HP Compaq 8200 Elite Series Manuel d'utilisation et d'entretien

Manuels Ordinateur de bureau populaires d'autres marques

Asus

Asus E210 Series Manuel utilisateur

Dell

Dell Inspiron 600m Manuel utilisateur

Dell

Dell Inspiron 3662 Manuel utilisateur

TotalFlow

TotalFlow uFLO Manuel utilisateur

Logitech

Logitech MK320 Manuel utilisateur

Dell

Dell XPS 730 H2C Manuel utilisateur

Sony

Sony Vaio Series Manuel utilisateur

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuel utilisateur

Alto

Alto MD 250 Manuel utilisateur

Lenovo

Lenovo ThinkCentre Edge 72 Manuel

Lenovo

Lenovo ThinkStation D20 Manuel

Arbor Technology

Arbor Technology FPC-7800 Series Manuel utilisateur

Sony

Sony VAIO VGX-TP1 Series Manuel utilisateur

Asus

Asus Eee Box B204 Manuel utilisateur

Dell

Dell Optiplex 9010 All In One Manuel utilisateur

Everex

Everex eXplora Manuel utilisateur

Lenovo

Lenovo ThinkCentre M75e Manuel utilisateur

Dell

Dell Alienware Area-51 R4 Manuel utilisateur

HP dx7400 - Microtower PC Manuel utilisateur

Manuels Ordinateur de bureau populaires d'autres marques