HP Dx5150 Series Instructions d'installation

HP-00007-01, Appendix 3 2-Jun-2005

HP Restricted

Page 1

Appendix 3 Product End-of-Life Disassembly instructions

Product Identification:

Marketing Name / Model Description

HP Business Desktop dx5150 Series Microtower, ATX board

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the

basic instructions for the disassembly of HP products to remove components and materials requiring

selective treatment.

1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment.

1.2 Enter the quantity of items contained within the product which require selective treatment in

the right column, as applicable.

Item Description Notes Qty in product.

Printed Circuit Boards (PCB) or Printed

Circuit Assemblies (PCA)

With a surface greater than 10

square cm

2 (sys board &

P/S board)

Batteries All types including standard

alkaline and lithium coin or button

style batteries

Mercury containing components For example, mercury in lamps,

display backlights, scanner lamps,

switches, batteries

Liquid Crystal Displays (LCD) with a

surface greater than 100 square cm

Includes background illuminated

displays with gas discharge lamps

Cathode Ray Tubes (CRT) 0

Capacitors / condensers (Containing

PCB / PCT)

Electrolytic Capacitors / Condensers

measuring greater than 2.5 cm in

diameter or height

2 (2 in P/S)

External electrical cables and cords 0

Gas Discharge Lamps 0

Plastics containing Brominated Flame

Retardants

Components and parts containing toner

and ink, including liquids, semi-liquids

(gel/paste) and toner

Include the cartridges, print

heads, tubes, vent chambers, and

service stations.

Components and waste containing

asbestos

Components, parts and materials

containing refractory ceramic fibers

Components, parts and materials

containing radioactive substances

HP-00007-01, Appendix 3 2-Jun-2005

HP Restricted

Page 2

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a

point where components and materials requiring selective treatment can be removed.

Tool Description Tool Size (if applicable)

Torx Screw Driver

Dikes See Figure 13

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials

requiring selective treatment:

SYSTEM BOARD

1 To remove the access panel (see Figure 1 below):

a. Loosen the captive thumbscrew that secures the access panel to the computer chassis.

b. Slide the access panel back about 2.5 cm (1 inch), and then lift it off the unit.

2 Unplug all cables from the system board (see Figure 2 below).

3 To remove the heatsink (see Figure 3 & 4 below):

a. Disconnect the heatsink fan cable from the system board.

b. Loosen the two screws that secure the heatsink to the processor.

c. Twist the heatsink to break the bond between it and the processor.

d. Lift the heatsink from the processor.

4 To remove the processor (see Figure 5 below):

a. Rotate the socket handle to its fully open position.

b. Lift the processor from the system board.

5 To remove the system board (see Figures 6 & 7 below):

a. Remove the eight screws that secure the system board to the chassis.

b. Slide the system board toward the front of the computer until the rear I/O connectors

clear the chassis, and then lift the system board out of the chassis.

POWER SUPPLY PCA

1 To remove the power supply (see Figure 8 below):

a. Disconnect all power cables from all devices.

b. Remove the screws that connect the power supply to the chassis.

c. Slide the power supply toward the front of the computer, and then lift it out of the

computer.

2 Remove the cover from the power supply by removing the screws from the power supply

surface, and then lifting the cover off of the power supply (see Figure 9 below)

3 Unplug all cables and remove all screws inside of the power supply.

4 Cut the four cables (two each) connected to the Switch and the Inlet

(see Figure 10 below).

HP-00007-01, Appendix 3 2-Jun-2005

HP Restricted

Page 3

POWER SUPPLY PCA (

continued

)

5 Remove the power supply PCA from the power supply (see Figure 11 below)

6 Cut the two capacitors (C4, C5) (see Figure 12 below) solder joint using dikes (see Figure

13 below), and then remove the capacitors.

BATTERY

1 Locate the battery and battery holder on the system board.

2 Depending on the type of battery holder on your system board, complete the following

instructions to replace the battery:

Type 1 Battery Holder (see Figure 14 below)

- Lift the battery out of the holder.

Type 2 Battery Holder (see Figure 15 below)

- To release the battery from the holder, squeeze the metal clamp that extends above one

edge of the battery. When the battery pops up, lift it out.

Type 3 Battery Holder (see Figure 16 below)

- To release the battery from the holder, press back the lever that extends above one edge

of the battery. When the battery pops up, lift it out.

HP-00007-01, Appendix 3 2-Jun-2005

HP Restricted

Page 4

3.2 Illustrations

FIGURE 1: Removing the access panel FIGURE 2: System board

FIGURE 3: Removing the heatsink assembly

FIGURE 4: Heatsink screw locations

FIGURE 5: Removing the processor

FIGURE 6: Removing the system board

HP-00007-01, Appendix 3 2-Jun-2005

HP Restricted

Page 5

FIGURE 7: System board screw locations

FIGURE 8: Removing the power supply

FIGURE 9: Power supply with cover removed

FIGURE 10: Switch and Inlet cables

FIGURE 11: Power supply PCA

FIGURE 12: Capacitors C4 and C5

HP-00007-01, Appendix 3 2-Jun-2005

HP Restricted

Page 6

FIGURE 13: Dikes

FIGURE 14: Type 1 battery holder

FIGURE 15: Type 2 battery holder

FIGURE 16: Type 3 battery holder

Autres manuels pour dx5150 Series

Table des matières

Autres manuels HP Ordinateur de bureau

HP 8000 - Elite Convertible Minitower PC Guide d'installation

HP 8100 - Elite Convertible Minitower PC Manuel utilisateur

HP d325 MT Manuel de référence

HP dx7400 - Microtower PC Guide de configuration

HP Vectra XE310 Manuel utilisateur

HP Kayak XA-s 02xx Manuel utilisateur

HP Workstation Z800 Mode d’emploi

HP m9400f - Pavilion - Elite Manuel utilisateur

HP Kayak XU 04xx Mode d’emploi

HP Compaq dc5100 Series Instructions de montage

HP D530 - Compaq Business Desktop Instructions d'utilisation

HP Pavilion t365 Manuel utilisateur

HP EliteOne 800 G1 Manuel utilisateur

HP Compaq Presario Manuel

HP Rp5000 - Point of Sale System Instructions d'installation et d'entretien

HP Pavilion t124 Instructions d'installation

HP dc5100 - Microtower PC Manuel utilisateur

HP 200 G3 Manuel

HP Tc2110 - Server - 128 MB RAM Instructions de montage

HP Compaq dx7510 Instructions d'installation

HP B132L+ Comment utiliser

HP Pavilion u600 - Desktop PC Manuel utilisateur

HP dx2100 - Microtower PC Manuel utilisateur

HP 300-1020 - TouchSmart - Desktop PC Mode d’emploi

Manuels Ordinateur de bureau populaires d'autres marques

Asus

Asus E210 Series Manuel utilisateur

Dell

Dell Inspiron 600m Manuel utilisateur

Dell

Dell Inspiron 3662 Manuel utilisateur

TotalFlow

TotalFlow uFLO Manuel utilisateur

Logitech

Logitech MK320 Manuel utilisateur

Dell

Dell XPS 730 H2C Manuel utilisateur

Sony

Sony Vaio Series Manuel utilisateur

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuel utilisateur

Alto

Alto MD 250 Manuel utilisateur

Lenovo

Lenovo ThinkCentre Edge 72 Manuel

Lenovo

Lenovo ThinkStation D20 Manuel

Arbor Technology

Arbor Technology FPC-7800 Series Manuel utilisateur

Sony

Sony VAIO VGX-TP1 Series Manuel utilisateur

Asus

Asus Eee Box B204 Manuel utilisateur

Dell

Dell Optiplex 9010 All In One Manuel utilisateur

Everex

Everex eXplora Manuel utilisateur

Lenovo

Lenovo ThinkCentre M75e Manuel utilisateur

Dell

Dell Alienware Area-51 R4 Manuel utilisateur

HP dx5150 Series Instructions d'installation

Manuels Ordinateur de bureau populaires d'autres marques