HotSpotEngine router Manuel utilisateur
Getting Started Guide (v.1.2) http://www.hotspotengine.com
1
HotSpotEngine Getting Started
Guide
HotSpot Management Solution
Version 1.2
evision 2 (April 22.2010)
Getting Started Guide (v.1.2) http://www.hotspotengine.com
2
Table of Contents
1.System Installation………………………………………………………………. 3
1.1 Prerequirement………………………………………………………………. 3
1.2 PreInstallation……………………………………………………………….. 3
1.3 Installation processes………………………………………………………... 5
1.4 Console login………………………………………………………………... 9
1.5 Change console password..………………………………………………….. 10
2. System Configuration…………………………………………………………... 10
2.1 DHCP client configuration………………………………………………….. 10
2.2 Hotspot administrator panel login…………………………………………… 10
2.3 Change administrator password……………………………………………... 11
2.4 Change network address…………………………………………………….. 12
2.5 Change default gateway and DNS…………………………………………... 12
2.6 Change date and time………………………………………………………... 13
2.7 Change hotspot identification……………………………………………….. 13
2.8 Create billing plan…………………………………………………………… 14
2.9 Add hotspot user…………………………………………………………….. 14
3. Hotspot Operation………………………………………………………………. 14
3.1 Integration with your network………………………………………………. 14
3.2 Hotspot login………………………………………………………………… 15
3.3 Hotspot logout……………………………………………………………….. 15
3.4.Hotspot usage information…………………………………………………... 15
3.5 DDW T Integration ………………………………………………………… 15
3.6 Mikrotik outerOS Integration …………………………………………….... 17
3.7 Paypal Integration …………………………………………………………… 19
4.Troubleshoot & Tips…………………………………………………………….... 22
4.1 Alternative logout……………………………………………………………. 22
4.2 Change hotspot login page………………………………………………….... 22
4.3 Limited 4GB issue…………………………………………………………… 22
4.4 Checking Downloaded File ………………………………………………….. 22
4.5 Client Unable to Browsing …………………………………………………... 23
4.6 Activate Software License ………………………………………………….... 23
5.Support …………………………………………………………………………… 23
Getting Started Guide (v.1.2) http://www.hotspotengine.com
3
1.System Installation
To install HotspotEngine, download the ISO image from the website and burn it into a
blank CD OM using any CD Burner of your choice. To boot up the computer, set up the
computer BIOS to boot from CD OM drive as first priority and insert the prepared CD
into the CD OM Drive. HotSpotEngine CD installer should begin to install
automatically.
Warning: during the installation process, the installer will format the entire partition of
your harddisk and use all space of that drive.
1.1.Prerequirement
By default HotSpotEngine will act as router for your network, even though built in
authenticating feature service can be used by other network via NAS remote. Thus, we
have to provide 2 network interface cards (LAN Card). In addition to the required
hardware you will need an existing network infrastructure A minimal setup will require a
broadband internet connection with router. This router can be either wired or wireless.
You will also need a dedicated wireless access point to use as your public hotspot.
HotSpotEngine then sits between your router and hotspot (see diagram below for better
explanation)
[_Hotspot_] <--> [_HotSpotEngine_] <--> [_ outer/Modem outer_] <--> (Internet)
You may be able to use a standard wireless router for your hotspot access point by
disabling its DHCP, outer and Encryption functionality and using only the switch/LAN
port (do not use the WAN or Internet port to connect to the HotSpotEngine machine.)
W T54XX Port Information
Getting Started Guide (v.1.2) http://www.hotspotengine.com
4
This method works on many wireless routers but not all. If you are having problems
receiving an IP address after installation and are using a wireless router as an wireless
access point, you may need an actual wireless access point.
1.2.Preinstallation and Default Configuration
HotSpotEngine Installation process is simple and straightforward. The installer will set
default password for console login (user root), hotspot administrator panel login and also
the default address of all networks.
HotSpotEngine is configured with the following defaults:
Default console login (SSH port 22)
Username : root
Password : hengine
Default hotspot administrator panel (HTTP port 80, FTP port 21)
Address : http://192.168.120.1/admin
Username : admin
Password : hengine
Default WAN network address:
IP Address : 192.168.1.2
Subnet ask : 255.255.255.0
Default Gateway and DNS
IP Address : 192.168.1.1
Primary DNS : 192.168.1.1
Secondary DNS : 192.168.2.1
Default LAN network address :
IP Address : 192.168.110.1
Subnet ask : 255.255.255.0
Default Hotspot Network :
Hotspot Gateway :
IP Address : 192.168.120.1
Subnet ask : 255.255.255.0
LAN Network (DHCP) :
IP Address Range : 192.168.120.2 – 192.168.120.254
Getting Started Guide (v.1.2) http://www.hotspotengine.com
5
Subnet ask : 255.255.255.0
1.3.Installation Process
The installer automatically detects hardware to find CD OM drive, and scans it content
The installer also automatically detect Network Hardware (Network Interface Card) and
later the default network address
Getting Started Guide (v.1.2) http://www.hotspotengine.com
6
The installer automatically erases and format hard disk and use the entire space on
that disk
Getting Started Guide (v.1.2) http://www.hotspotengine.com
7
The Installer automatically installs base system and install required software
Getting Started Guide (v.1.2) http://www.hotspotengine.com
8
Eventually, the installer installs G UB boot loader
Installation Process completed, and it will be reboot the computer and eject CD OM
drive
Getting Started Guide (v.1.2) http://www.hotspotengine.com
9
HotSpotEngine Installation takes approximately 8-13 minutes (tested on Intel Core 2 duo,
AM 4 GB) , and will use about 400-500 MB of space.
1.4.Console Login
After installation, HotSpotEngine configuration is needed. For safety reason, we strongly
suggest to update the root password. Default console can be used to perform password
changing.
For your convenience, web based administration system can be used to manage hotspot
system. However certain operations such as system upgrade and network connection
tools (ping and traceroute) should be performed in console prompt. Future releases of
HotSpotEngine, will change the system so it does not need console prompt.
Getting Started Guide (v.1.2) http://www.hotspotengine.com
10
1.5.Change Console Password
Once logged to the system, please type passwd to change the console
password
2.System Configuration
2.1.DHCP Client Configuration
To remotely manage the system configuration, connect your client computer to LAN
interface and ensure the computer to have an IP assigned from the server (DHCP).
If client computer does not have an IP assigned, you may have to check the cable or the
server interface to which you are connected. Try to reconnect using another installed
interface.
2.2.HotSpot Administrator Panel Login
Once IP address acquired, remote web configuration can be accessed using a web
browser at (note: before you can access web configuration interface, it requires to
activate the software by uploading license file, for futher information please read activate
software license sub chapter on this document):
http://192.168.120.1/admin
Default login for the web configuration is admin with default password hengine. It is
strongly recommended to change the default password once you are logged in. You may
access web administrator panel login by accessing http://admin, (its valid when you have
configured DNS server correctly).
Ce manuel convient aux modèles suivants
1
Table des matières
