Honeywell RCT8100 Manuel utilisateur

RCT8100

Programmable Thermostat

Operating

Manual

69-2337EF-01

69-2337EF-01.book Page -1 Friday, May 25, 2012 2:24 PM

Need Help?

For assistance with this product please visit http://yourhome.honeywell.com

or call Honeywell Customer Care toll-free at 1-800-468-1502.

Read and save these instructions.

® U.S. Registered Trademark. Patents pending.

CAUTION: EQUIPMENT DAMAGE HAZARD

To prevent possible compressor damage, do not use Cooling mode when the outdoor

temperature is below 50 °F (10 °C).

69-2337EF-01.book Page 0 Friday, May 25, 2012 2:24 PM

RCT8100 Programmable Thermostat

About your new thermostat

Thermostat features ..................................... 2

Early Start .................................................... 3

Compressor protection ................................. 3

Quick reference to controls........................... 4

Quick reference to display ............................ 5

Quick start .................................................... 6

Programming & Operation

Set the clock................................................. 7

Select system setting (Heat/Cool) ................ 8

Select fan setting (Auto/On) ......................... 9

Using the schedule................................ 10-13

Temporary schedule override ..................... 14

Permanent schedule override..................... 15

Appendices

Filter replacement........................................16

Battery replacement ....................................17

In case of difficulty.......................................18

Customer assistance...................................19

Limited warranty ..........................................20

Table of contents

Your new thermostat is pre-programmed

and ready to go!

See page 6 for quick start.

69-2337EF-01.book Page 1 Friday, May 25, 2012 2:24 PM

Operating Manual

69-2337EF—01 2

Your new Honeywell thermostat has been designed to give you many years of reliable service and

easy-to-use, push-button climate control.

Features

• Backlit display is easy to read

• Displays ambient (measured) temperature at all times

• One-touch access to setpoint temperature

• Preprogrammed schedule can greatly reduce your heating/cooling expenses

• 7-day programming

• Temporary and permanent override of schedule

• Early Start ensures right temperature at the right time

• Built-in compressor protection

About your new thermostat

69-2337EF-01.book Page 2 Friday, May 25, 2012 2:24 PM

RCT8100 Programmable Thermostat

3 69-2337EF—01

Early Start allows the thermostat to “learn” how long your furnace or air conditioner takes to reach the set

temperature. Simply program the desired times and desired temperatures into the schedule. The thermostat

will determine when to activate heating or cooling so that the desired temperature is attained at the desired

time.

Example: If you set Period 1 (see page 10) to 6 a.m. and the temperature to 70 °F (21 °C), the heat will come

on before the set time, so the temperature is 70 °F (21 °C) by the time you wake at 6 a.m.

Your thermostat has a feature that helps prevent damage to the compressor of your air conditioning. Because

damage can occur if the compressor is restarted too soon after shutdown, this feature forces the compressor

to wait 5 minutes before restarting. During the wait time, flashes on the screen. When the safe wait time

has elapsed, the icon stops flashing and the compressor turns on.

Early Start

Built-in compressor protection

69-2337EF-01.book Page 3 Friday, May 25, 2012 2:24 PM

Operating Manual

69-2337EF—01 4

Quick reference to controls

System switch

(see page 8) Fan Switch

(see page 9)

Screen

Lit for 12 seconds when

you press the backlight

button or any other button.

Programming buttons

(see pages 12 & 13)

Temperature buttons

Battery compartment (for 2 AA batteries)

Backlight button

69-2337EF-01.book Page 4 Friday, May 25, 2012 2:24 PM

RCT8100 Programmable Thermostat

5 69-2337EF—01

Quick reference to display screen

* flashes when the compressor protection is engaged (see page 3).

Temperature

The ambient (measured)

temperature is normally

displayed. To view the

setpoint temperature, press

or once. The setpoint

temperature will appear for

5 seconds.

Replace batteries

(see page 14)

Setpoint indicator

Appears when the setpoint

temperature is displayed.

Time

Current period number

Appears when the thermostat

is following the schedule (see

temporary override on page

14 and permanent override on

page 15)

Day

Heating is on

Cooling is on *

Replace filter

(see page 14)

69-2337EF-01.book Page 5 Friday, May 25, 2012 2:24 PM

Operating Manual

69-2337EF—01 6

Simply perform the three steps below and the thermostat is in operation:

Set the clock.................................................................................................................. See page 7

Select whether to heat or cool....................................................................................... See page 8

Select whether to keep the fan on continuously or only when needed.......................... See page 9

If you do not wish to use the pre-programmed schedule settings, you can:

Modify the schedule .................................................................................................... See page 12

Temporarily override the schedule .............................................................................. See page 14

Permanently override the schedule............................................................................. See page 15

This thermostat is ready to go

69-2337EF-01.book Page 6 Friday, May 25, 2012 2:24 PM

RCT8100 Programmable Thermostat

7 69-2337EF—01

Press Clk. The hour will flash.

Press or to set the hour.

Press Clk. The minutes will flash.

Press or to set the minutes.

Press Clk. The day will flash.

Press or to set the day.

Press Exit.

NOTE: The time display flashes when the clock has lost its settings

Set the clock

Press to start time and day setting

Press to set the time or the day

Time and day display

Press to end time and day setting

69-2337EF-01.book Page 7 Friday, May 25, 2012 2:24 PM

Operating Manual

69-2337EF—01 8

Select the system setting

Use the System switch to place the system in one of the following

modes:

•Heat: System is in Heating mode.

•Off: System is off.

•Cool: System is in Cooling mode.

CAUTION: EQUIPMENT DAMAGE HAZARD

Do not use Cooling mode when the outdoor temperature is below 50 °F (10 °C).

NOTE: When you place the thermostat in Cooling mode, you might need to wait up to

five minutes before cooling can start. This is a safety feature for the compressor. will

flash on the screen until cooling starts.

69-2337EF-01.book Page 8 Friday, May 25, 2012 2:24 PM

Autres manuels pour RCT8100

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Honeywell Thermostat

Honeywell

Honeywell LR-HWLV-HVAC Manuel utilisateur

Honeywell

Honeywell T7351 Manuel du propriétaire

Honeywell

Honeywell resideo TH6320U2008 Manuel utilisateur

Honeywell

Honeywell RLV4300 Manuel utilisateur

Honeywell

Honeywell T834C Manuel utilisateur

Honeywell

Honeywell Q682B Manuel utilisateur

Honeywell

Honeywell FocusPRO TH5000 Series Manuel utilisateur

Honeywell

Honeywell RTH2300 series Manuel utilisateur

Honeywell

Honeywell PRO TH4000 series Manuel utilisateur

Honeywell

Honeywell TB3 Series Manuel utilisateur

Honeywell

Honeywell Lyric T6R Manuel utilisateur

Honeywell

Honeywell T822K Manuel utilisateur

Honeywell

Honeywell T8601D Manuel utilisateur

Honeywell

Honeywell CT30 Series Manuel utilisateur

Honeywell

Honeywell RTH2300 series Manuel utilisateur

Honeywell

Honeywell PRESTIGE THX9321 Manuel utilisateur

Honeywell

Honeywell RTH2310 Manuel utilisateur

Honeywell

Honeywell T6 Pro Hydronic Manuel utilisateur

Honeywell

Honeywell PRO TH2000 Series Manuel utilisateur

Honeywell

Honeywell Tradeline Chronotherm IV Manuel utilisateur

Honeywell

Honeywell LP916A-C Manuel utilisateur

Honeywell

Honeywell VT15 Manuel utilisateur

Honeywell

Honeywell TH9421C1004 Manuel utilisateur

Honeywell

Honeywell EASY-TO-SEE T87N Manuel utilisateur

Manuels Thermostat populaires d'autres marques

EWELLY

EWELLY EW-181 Manuel utilisateur

Prolon

Prolon T1100 Instructions d'installation

Computherm

Computherm Q20 Manuel utilisateur

Heatmiser

Heatmiser neoStat Manuel utilisateur

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur

Saswell

Saswell SAS920XWHB-7-S-RF Mode d’emploi

Aircalo

Aircalo TFP1-ET85P2 Manuel utilisateur

Carrier

Carrier DEBONAIR 33CS Manuel utilisateur

Lennox

Lennox iHarmony Zone Thermostat Instructions de montage

Gemtech

Gemtech GT7000 Mode d’emploi

Rollei

Rollei Smartes 45000 Manuel utilisateur

Sinope

Sinope TH1300RF Manuel utilisateur

NuTone

NuTone NTBZ48 Instructions d'utilisation d'origine

Stelpro

Stelpro MAESTRO ASMT402AD Manuel utilisateur

Aube Technologies

Aube Technologies TH305 Manuel utilisateur

Powtier Controls

Powtier Controls 505MST Manuel utilisateur

Kanmor

Kanmor Zone Control 369e Manuel utilisateur