Honeywell MagicStat CT3300 Guide de l'utilisateur

Model CT3300 Installation Quick Guide

69-1550

Your NEW thermostat may be programmed before or after installation (see reverse).

Items needed: two AA batteries, pan head screwdriver, drill and level (optional).

1. Turn off Heating/Cooling system power.

2. Remove old thermostat from wall. Use enclosed labels to mark the wires as you

disconnect them. Label wires by using letters above screw terminals, not by wire colors.

3. Install batteries into programmable thermostat.

4. Separate wallplate from new thermostat. Mount wallplate to wall with hardware

provided. Use level if desired and 3/16 in. drill bit in drywall or 7/32 in. drill bit in

plaster or wood.

5. Attach the system wires to matching screw terminals, using the label designations

from step 2. NOTE: If you have 5 wires, remove factory installed jumper between R and Rc.

6. Mount the thermostat to wallplate - insert top and snap in bottom.

7. Set the thermostat System switch to Heat or Cool and the system will

operate at the factory settings. See Programming Quick Guide (reverse)

to program thermostat.

Congratulations! You have finished installing your new Honeywell programmable thermostat!

For additional information refer to Programming and Installation Instructions or contact

Honeywell Customer Relations at www.honeywell.com/yourhome or 1-800-468-1502.

Model CT3300 Programming Quick Guide

Set Current Time and Day

Press once; pressTime until current time is displayed. Press again; press Time until current

day is displayed. Press .

Heating Program

Set System switch to Heat. Press once. Press Time and Temp to program WAKE for Mon. - Fri.

Repeat for LEAVE, RETURN and SLEEP.

Press until Sat. - Sun. appear in display. Press Time and Temp to program WAKE for Sat. - Sun.

Repeat for SLEEP.

After programming is finished, Press .

Cooling Program

Set System switch to Cool. Repeat each step in the Heating Program to set cooling program.

Set

Clock/Day

Set

Clock/Day

Ahead

Back

Ahead

Back

Ahead

Back

Ahead

Back

Warmer

Cooler

Warmer

Cooler

Run

Program

Run

Program

Weekday

Schedule

Weekend

Schedule

Program the CT3300 Thermostat before or after the thermostat is mounted to the wall.

Simply insert batteries (see Installation Quick Guide) to activate.

Open thermostat cover to access programming buttons and system switches.

For additional information refer to the Programming and Installation Instructions or contact Honeywell Customer Relations at

www.honeywell.com/yourhome or 1-800-468-1502.

Autres manuels pour MagicStat CT3300

Table des matières

Autres manuels Honeywell Thermostat

Honeywell

Honeywell RTH6400 Series Manuel utilisateur

Honeywell

Honeywell Super Tradeline T874G Manuel utilisateur

Honeywell

Honeywell Y87RF Manuel utilisateur

Honeywell

Honeywell thr840duk Manuel utilisateur

Honeywell

Honeywell RTH3100C Manuel utilisateur

Honeywell

Honeywell T410A Manuel utilisateur

Honeywell

Honeywell VisionPRO Wi-Fi TH8320WF Manuel utilisateur

Honeywell

Honeywell T Series Manuel utilisateur

Honeywell

Honeywell T87F Manuel utilisateur

Honeywell

Honeywell 191108AJ Manuel utilisateur

Honeywell

Honeywell CM67 Manuel utilisateur

Honeywell

Honeywell TRADELINE Y594 Guide de dépannage

Honeywell

Honeywell Chronotherm IV T8600D Manuel utilisateur

Honeywell

Honeywell BACnet Manuel utilisateur

Honeywell

Honeywell PRESTIGE THX9321 Guide de l'utilisateur

Honeywell

Honeywell Y9420H Sundial RF2 Manuel utilisateur

Honeywell

Honeywell INNCOM e7w Manuel utilisateur

Honeywell

Honeywell RTH111 series Manuel utilisateur

Honeywell

Honeywell CHRONOTHERM IV T8665A Manuel utilisateur

Honeywell

Honeywell TH114-A-240D Manuel utilisateur

Honeywell

Honeywell T827B Manuel utilisateur

Honeywell

Honeywell EVOTOUCH CONTROLLER Manuel utilisateur

Honeywell

Honeywell CM707 Manuel utilisateur

Honeywell

Honeywell RLV450 Manuel utilisateur

Manuels Thermostat populaires d'autres marques

EWELLY

EWELLY EW-181 Manuel utilisateur

Prolon

Prolon T1100 Instructions d'installation

Computherm

Computherm Q20 Manuel utilisateur

Heatmiser

Heatmiser neoStat Manuel utilisateur

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur

Saswell

Saswell SAS920XWHB-7-S-RF Mode d’emploi

Aircalo

Aircalo TFP1-ET85P2 Manuel utilisateur

Carrier

Carrier DEBONAIR 33CS Manuel utilisateur

Lennox

Lennox iHarmony Zone Thermostat Instructions de montage

Gemtech

Gemtech GT7000 Mode d’emploi

Rollei

Rollei Smartes 45000 Manuel utilisateur

Sinope

Sinope TH1300RF Manuel utilisateur

NuTone

NuTone NTBZ48 Instructions d'utilisation d'origine

Stelpro

Stelpro MAESTRO ASMT402AD Manuel utilisateur

Aube Technologies

Aube Technologies TH305 Manuel utilisateur

Powtier Controls

Powtier Controls 505MST Manuel utilisateur

Kanmor

Kanmor Zone Control 369e Manuel utilisateur