Honeywell SD500-PSDA Manuel utilisateur

I56-3632-003/151177 ECN: 2017-4407

I56-3632-003

SD500-PS and SD500-PSDA

Addressable Fire Pull Station

Installation Instructions

The SD500-PS is an single action addressable

fire pull station and the SD500-PSDA is a dual

action addressable fire pull station. The SD500-

PS and SD500-PSDA are a normally open

initiating point that is compatible with

Honeywell Silent Knight and Farenhyt Series

addressable fire alarm control panels (FACP).

The SD500-PS/PSDA are designed for indoor

use in non-explosive environments. Used to

activate a non-coded alarm instantly.

An on-board status LED is visible from the front

of the pull station. The LED flashes to indicate

proper communication with the FACP

(approximately every 30 seconds).

Specifications

Operation

To activate the fire pull station:

1. Grab the top of the pull station where it is

labeled “PULL”.

2. Pull the cover plate out and down.

To reset the pull station:

1. Insert key into the lock.

2. Turn the key clockwise.

3. Close the cover plate.

4. Turn the key counter clockwise.

Wiring to the SD500-PS/PSDA

Wire the SD500-PS as shown in Figure 1.

Figure 1: Fire Pull Station Wiring

Mounting the SD500-PS/PSDA

The pull station mounts to a standard single gang

electrical switch box or a surface mount back

box P/N PS-SMBB (sold separately). See Figure

Parameter Rating

Max. Line resistance 50

Max. Alarm

Current One device in

alarm 23mA. 46

mA for two

devices in alarm.

.5 mA for each

additional device in

alarm.

Max. Voltage 33 V

Operating Temperature 0° to 49° C

(32° to 120° F)

Dimensions 5-1/8” H x 3-1/16” W x 1.5” D

Parameter Rating

Supervised

Power Limited

I56-3632-003 / 151177

ECN: 2017-4407

Silent Knight®, Farenhyt®, and Honeywell®are registered trademarks of Honeywell International, Inc.

Figure 2: Mounting the Fire Pull Station

Installing The SD500-LK

The SD500-LK is used to convert the SD500-PS

(single action pull station) to a SD500-PSDA

(Dual action pull station. Refer to Figure 3 to

install the SD500-LK Dual Action Conversion

Kit.

Figure 3: SD500-LK Installation

PS-SMBB

Mounting

Holes

Single Gang

Electrical

Switch Box

To meet ADA requirements the

access and no more than 54" from

pull station must be mounted 48"

from the floor for wheelchair forward

the floor for wheelchair side access

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Honeywell Système de sécurité

Honeywell

Honeywell VAM Manuel utilisateur

Honeywell

Honeywell Galaxy 2-44+ Manuel utilisateur

Honeywell

Honeywell 702 Manuel de service

Honeywell

Honeywell LYNX TOUCH L5200 Manuel utilisateur

Honeywell

Honeywell First Alert 145C Manuel utilisateur

Honeywell

Honeywell ADEMCO 5809 Instructions de montage

Honeywell

Honeywell Friedland FGGA04 Series Manuel utilisateur

Honeywell

Honeywell ADE ACCENTA Gen4 Manuel utilisateur

Honeywell

Honeywell Friedland FGGA07 Series Manuel utilisateur

Honeywell

Honeywell LXL-1000 Manuel utilisateur

Honeywell

Honeywell VISTA-128FBPN Instructions de montage

Honeywell

Honeywell ESSER TAM Manuel utilisateur

Honeywell

Honeywell Lynx Plus Series Manuel utilisateur

Honeywell

Honeywell LYNX Manuel utilisateur

Honeywell

Honeywell GENT Xenex Guide produit

Honeywell

Honeywell Ademco VISTA-20P Manuel utilisateur

Honeywell

Honeywell Friedland HISK1 Manuel utilisateur

Honeywell

Honeywell SEF8MA Manuel utilisateur

Honeywell

Honeywell Fire-Lite Alarms MS-9200UDLSC Manuel utilisateur

Honeywell

Honeywell VISTA-128BPT Instructions de montage

Honeywell

Honeywell Evohome Manuel utilisateur

Honeywell

Honeywell NETAXS NX4L1 Manuel utilisateur

Honeywell

Honeywell VISTA 15P - Ademco 6 Zone Control Panel Mode d'emploi

Honeywell

Honeywell VISTA-128BPT Mode d'emploi

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur