Honeywell E-Class Series Manuel utilisateur



DPL Command Reference

for E-Class, I-Class, RL3e, RL4e, RP2, and RP4 Series Printers



User Guide

Disclaimer

Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other

information contained in this document without prior notice, and the reader should in all cases consult

HII to determine whether any such changes have been made. The information in this publication does

not represent a commitment on the part of HII.

HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental

or consequential damages resulting from the furnishing, performance, or use of this material.

This document contains proprietary information that is protected by copyright. All rights are reserved.

No part of this document may be photocopied, reproduced, or translated into another language without

the prior written consent of HII.

Other product names or marks mentioned in this document may be trademarks or registered

trademarks of other companies and are the property of their respective owners.

Web Address: sps.honeywell.com

Other product names or marks mentioned in this document may be trademarks or registered

trademarks of other companies and are the property of their respective owners.

Patents

For patent information, please refer to www.hsmpats.com.

ii DPLCommand Reference

Customer Support

Technical Assistance

Go to sps.honeywell.com and select Support > Productivity to find a host of options to help you quickly

find the support you need and/or who to contact.

Product Service and Repair

Honeywell International Inc. provides service for all of its products through service centers throughout

the world. Go to sps.honeywell.com and select Support to find a service center near you or to get a

Return Material Authorization number (RMA #) before returning a product.

Limited Warranty

For warranty information, go to sps.honeywell.com and select Support > Warranties.



DPL Command Reference iii

iv DPLCommand Reference

TABLE OF CONTENTS



Customer Support iii

Chapter 1 - DPL Command Reference 1

Control Code Command Functions 2

Attention-Getters 2

Easy Control Codes 2

Alternate Control Code Modes 2

Typical Data Flow Sequence 4

Status Commands 4

Configuration Commands 5

Download Commands 6

Label Header Commands 6

Chapter 2 - Immediate Commands 2

SOH # Reset 2

SOH * Reset 3

SOH A Send ASCII Status String 3

SOH a Send ASCII Extended Status String 4

SOH B Toggle Pause 6

SOH C Stop/Cancel 6

SOH D SOH Shutdown 6

SOH E Send Batch Remaining Quantity 7

SOH e Send Batch Printed Quantity 7

SOH F Send Status Byte 7

Chapter 3 - System Level Commands 9

STX A Set Time and Date 10

STX a Enable Feedback Characters 11

STX B Get Printer Time and Date Information 11

STX c Set Continuous Paper Length 12

STX E Set Quantity for Stored Label 13

STX e Select Edge Sensor 13

DPL Command Reference v

STX F Form Feed 14

STX f Set Form Stop Position (Backfeed Command) 14

STX G Print Last Label Format 14

STX I Input Image Data 15

STX i Scalable Font Downloading 16

STX J Set Pause for Each Label 16

STX k Test Communication Port 17

STX L Enter Label Formatting Command Mode 17

STX M Set Maximum Label Length 17

STX m Set Printer to Metric Mode 18

STX n Set Printer to Imperial Mode 18

STX O Set Start of Print (SOP) Position 18

STX o Cycle Cutter 19

STX P Set Hex Dump Mode 19

STX p Controlled Pause 19

STX Q Clear All Modules 20

STX q Clear Module 20

STX R Ribbon Saver Control 20

STX r Select Reflective Sensor 21

STX S Set Feed Speed 21

STX T Print Quality Label 21

STX t Test DRAM Memory Module 22

STX U Label Format String Replacement Field 22

STX V Software Switch Settings 23

STX v Request Firmware Version 24

STX W Request Memory Module Information 25

STX w Test Flash Memory Module 26

STX X Set Default Module 27

STX x Delete File from Module 27

STX Y Output Sensor Values 28

STX y Select Font Symbol Set 29

STX Z Print Configuration Label 30

STX z Pack Module 31

Chapter 4 - Extended System Level Commands 32

STX K}E Empty Sensor Calibration 33

STX K}M Manual Media Calibration 33

STX K}Q Quick Media Calibration 34

STX KaR Read Data from RFID Tag 34

STX KaW Write Data to RFID Tag 35

STX Kb Backfeed Time Delay 36

STX KC Get Configuration 36

vi DPLCommand Reference

STX Kc Configuration Set 37

STX KD Database Configuration 47

STX Kd Set File as Factory Default 49

STX KE Character Encoding 50

Character Encoding Syntax 51

STX KF Select Factory Defaults 52

STX Kf Set Present Distance 53

STX KH Dot Check 53

STX KI GPIO Input 55

STX Kn NIC Reset 55

STX KO GPIO Output 56

STX Kp Module Protection 56

STX Kr Resettable Counter Reset 57

STX KtA Write Application Family Identifier (AFI) to Tag 57

STX KtD Write Data Storage Format Identifier (DSFID) to Tag 58

STX KtE Write Electronic Article Surveillance (EAS) Bit 58

STX KtH Read and Feedback Tag Information to Host 59

STX KtR Read Data from RFID Tag 59

STX KtU Read Unique Serial Number from RFID Tag 60

STX KtW Write Data to RFID Tag 61

STX KuB Read Data from Gen2 Tag Section 62

STX KuF Send RFID Device Firmware Version 62

STX KuJ Write Data to Gen 2 Tag Section 62

STX KuR Read Data from RFID Tag 63

STX KuW Write Data to RFID Tag 64

STX KV Verifier Enable/Disable 64

STX Ky Download Plug-in File 65

STX KZ Immediately Set Parameter 65

Chapter 5 - Configuration Commands 67

AL Alignment Length 71

AS Single Byte Symbol Set 71

AV Avalanche Enabled Parameters 71

BA Backup After Print 75

BD Backup Delay 75

BL Backup Label 75

BP British Pound 75

BS or bS Backup Speed 76

BT Bluetooth Parameters 76

BZ Buzzer Enable 78

CC Control Codes 78

CE Cutter Equipped 79

DPL Command Reference vii

CF Column Adjust Fine Tune 80

CH Communicated Heat Commands 80

CL Continuous Label Length 80

CO Column Offset 80

CS Communicated Speed Commands 81

CT Communicated TOF Commands 81

CU Configuration Upgrade Package Parameters 81

DE DPI Emulation 82

DK Darkness 83

DM Default Module 83

DR Delay Rate 83

DS Double Byte Symbol Set 83

EM Input Mode 83

EN End Character 84

EP End of Print 85

EQ Start of Print 85

ES ESC Sequences 85

EV Empty Sensor Level 86

FA Format Attribute 86

FB Scalable Font Bolding 86

FE Font Emulation 86

FH Fault Handling 87

FM Feedback Mode 89

FS Slew Speed 89

GA Alternate Gap Type 89

GD Display Mode 90

GE GPIO Equipped 90

GM Gap Mark Value 90

GP GPIO Error Pause 91

GR Gain Reflective Value 91

GS GPIO Slew 91

HC Head Cleaning 91

HE Heat 92

HT Host Timeout 92

IC Ignore Control Codes 92

IE Ignore Distances 93

IL Imaging Mode 93

IM Internal Module 93

LE Legacy Emulation 94

LM Label Store 94

LR Label Rotation 94

LS Language Select 94

LW Label Width 95

viii DPLCommand Reference

MCC Module Command 95

ML Maximum (Label) Length 95

MM Menu Mode 96

MT Media Type 96

MV Mark Value 96

NE Network Configuration 96

NR No Reprint 106

NS Disable Symbol Set Selection 107

OF Option Feedback Mode 107

PC Print Contrast 109

PD Present Distance 109

PE Peel Mode 109

PJ Present Adjust Fine Tune 110

PL Printer Level 110

PM Pause Mode 110

PO Paper Empty 110

PP Parallel Direction 110

PS Present Sensor Equipped 111

pS Print Speed 111

PT Tear Position 111

PV Paper Value 112

PW Password Set 112

QQ Query Configuration 112

RE Ribbon Saver Equipped 113

RF Row Adjust Fine Tune 113

RI RFID Configuration 113

RL Ribbon Low Diameter 116

RM Rewinder Equipped 116

RO Row Offset 116

RP Ribbon Low Pause 116

RR Rewinder Adjust 117

RS Ribbon Low Signal 117

RV Reflective Paper Value 117

RW Retract Delay 117

SA SOP Adjust 118

SC Scalable Cache 118

SE SOP Emulation 118

SF Save As Filename 119

SG Sensor Gain Value 119

Sl Security Lock 119

SL Stop Location 119

SM Maximum Length Ignore 120

SN Scanner Configuration 120

DPL Command Reference ix

SP Serial Port 123

SS or sS Feed Speed 124

ST Sensor Type 125

SV Switch Settings 125

TP TOF Precedence 125

UD User Label Mode 125

UM Units of Measure 126

UN Plug and Play ID Type 126

UT User Terminator 126

VE Verifier Equipped 126

Chapter 6 - Label Formatting Commands 128

: Set Cut by Amount 129

A Set Format Attribute 130

B Barcode Magnification 131

C Set Column Offset Amount 131

c Set Cut by Amount 132

D Set Dot Size Width and Height 132

E Terminate Label Formatting Mode and Print Label 133

e Recall Printer Configuration 133

F Advanced Format Attributes 134

G Place Data in Global Register 135

H Enter Heat Setting 136

J Justification 136

M Select Mirror Mode 137

m Set Metric Mode 137

n Set Inch (Imperial) Mode 138

P Set Print Speed 138

p Set Backfeed Speed 139

Q Set Quantity of Labels to Print 139

R Set Row Offset Amount 140

r Recall Stored Label Format 141

S Set Feed Speed 142

s Store Label Format in Module 142

T Set Field Data Line Terminator 143

t Add or subtract date time from the printer date 144

U Mark Previous Field as a String Replacement Field 145

X Terminate Label Formatting Mode 146

y Select Font Symbol Set 146

z Zero (Ø) Conversion to "0" 147

+ | > | ( Make Last Field entered an Increment Field 147

– |< | ) Make Last Field entered a Decrement Field 148

xDPLCommand Reference

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Honeywell Imprimante

Honeywell

Honeywell PX4i Manuel utilisateur

Honeywell

Honeywell PC43K Manuel utilisateur

Honeywell

Honeywell RP2B Manuel utilisateur

Honeywell

Honeywell PC42T Manuel utilisateur

Honeywell

Honeywell 6824 Manuel utilisateur

Honeywell

Honeywell PC42T Manuel utilisateur

Honeywell

Honeywell CN51 PrintPAD Manuel utilisateur

Honeywell

Honeywell RP2 Manuel utilisateur

Honeywell

Honeywell RFID Kit Manuel utilisateur

Honeywell

Honeywell PC42E-T Manuel utilisateur

Honeywell

Honeywell IMPACT IHR810 Manuel utilisateur

Honeywell

Honeywell PM43 Manuel utilisateur

Honeywell

Honeywell PC42T Manuel utilisateur

Honeywell

Honeywell PB22 Manuel utilisateur

Honeywell

Honeywell 6824 Manuel utilisateur

Honeywell

Honeywell PD45 Manuel utilisateur

Honeywell

Honeywell PC43K Manuel utilisateur

Honeywell

Honeywell PC300T Manuel utilisateur

Honeywell

Honeywell PRU0901 Manuel utilisateur

Honeywell

Honeywell MP Compact4 Manuel utilisateur

Honeywell

Honeywell PC45 Series Manuel utilisateur

Honeywell

Honeywell datamax-o'neil M-Class Mark II Manuel utilisateur

Honeywell

Honeywell E-Class MK IIIA Manuel utilisateur

Honeywell

Honeywell MP Nova Mark II Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur