Honeywell UDA2182 Manuel utilisateur

Honeywell Process Solutions

UDA2182

Communications

User Guide

70-82-25-126

January 2009

ii UDA2182 Communications User Guide January 09

Revised – January 2009

Warranty/Remedy

Honeywell warrants goods of its manufacture as being free of defective materials and faulty

workmanship. Contact your local sales office for warranty information. If warranted goods are

returned to Honeywell during the period of coverage, Honeywell will repair or replace without charge

those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other

warranties, expressed or implied, including those of merchantability and fitness for a

particular purpose. Specifications may change without notice. The information we supply is

believed to be accurate and reliable as of this printing. However, we assume no responsibility for its

use.

While we provide application assistance personally, through our literature and the Honeywell web

site, it is up to the customer to determine the suitability of the product in the application.

Honeywell Process Solutions

2500 W. Union Hill Drive

Phoenix, Arizona 85027

Modbus is a registered trademark of MODICON, Inc.

Windows is an addressed trademark of Microsoft Inc.

The omission of a name from this list is not to be interpreted that the name is not a trademark.

Reference: Modicon Modbus Protocol Reference Guide - PI-MBUS-300 Rev. G

January 09 UDA2182 Communications User Guide iii

About This Document

Abstract

This document provides information specific to the communications interface for Honeywell’s Universal Dual

Analyzer (UDA) 2182.

In this document you will find:

•How to wire the Ethernet and serial ports

•How to configure the Ethernet port settings

•How to use Modbus RTU to read and write UDA parameters on the serial port

•How to use Modbus TCP to read and write UDA parameters on the Ethernet port

•How to use the UDA web pages

•How to send email alarm events from the UDA

Contacts

World Wide Web

The following lists Honeywell’s World Wide Web sites that will be of interest to our customers.

Honeywell Organization WWW Address (URL)

Corporate http://www.honeywell.com

Honeywell Field Solutions http://www.honeywell.com/ps

Technical tips http://content.honeywell.com/ipc/faq

Telephone

Country Organization Phone Number

United States and Canada Honeywell

1-800-423-9883 Tech. Support

1-800-525-7439 Service

Acronyms and Definitions

UDA Universal Dual Analyzer

TCP Transmission Control Protocol

IP Internet Protocol

IE Internet Explorer

SMTP Simple Mail Transfer Protocol

DNS Domain Name System

DHCP Dynamic Host Configuration Protocol

TFTP Trivial File Transfer Protocol

iv UDA2182 Communications User Guide January 09

Contents

1. INTRODUCTION................................................................................................... 1

1.1 Overview........................................................................................................................................1

1.2 Specifications .................................................................................................................................2

2. COMMUNICATION CARD WIRING...................................................................... 3

2.1 Overview........................................................................................................................................3

2.2 Ethernet Port Wiring ......................................................................................................................3

2.3 Serial Port Wiring........................................................................................................................... 4

3. UDA COMMUNICATIONS SETUP ....................................................................... 5

3.1 UDA Ethernet Communications Setup...........................................................................................5

3.1.1 Overview .............................................................................................................................5

3.1.2 Setting up a Static IP Address using the Front Panel ..........................................................6

3.1.3 Setting up DHCP using the front-panel...............................................................................8

3.2 UDA Serial Communications Setup...............................................................................................9

4. MODBUS RTU SERIAL COMMUNICATION PORT........................................... 10

4.1 Overview......................................................................................................................................10

4.2 Modbus RTU Message Format ....................................................................................................10

4.3 Modbus RTU Link Layer.............................................................................................................11

4.4 General Modbus RTU message format ........................................................................................ 11

4.5 Modbus RTU Data Layer.............................................................................................................11

5. MODBUS/TCP INTERFACE............................................................................... 12

5.1 Introduction..................................................................................................................................12

5.2 Modbus/TCP Protocol..................................................................................................................12

5.3 Parameter Addressing...................................................................................................................12

6. IEEE 32-BIT FLOATING POINT REGISTER INFORMATION............................ 13

6.1 IEEE Floating Point Data Format.................................................................................................13

7. MODBUS DOUBLE REGISTER FORMAT......................................................... 16

7.1 Overview......................................................................................................................................16

7.2 IEEE Floating Point Formats........................................................................................................17

7.3 Unsigned/signed 32-bit Register Formats ....................................................................................18

7.4 Setting Up the Modbus Double Register Format ......................................................................... 19

January 09 UDA2182 Communications User Guide v

8. MODBUS/TCP & MODBUS RTU FUNCTION CODES....................................... 21

8.1 Function code definitions.............................................................................................................21

8.2 Function Code 03- Read Holding (Data) Registers......................................................................22

8.3 Function Code 04 - Read Input Registers.....................................................................................23

8.4 Function Code 16 (10h) - Preset Multiple Registers....................................................................24

8.5 Function Code 17 (11h) - Report UDA ID................................................................................... 25

9. MODBUS RTU EXCEPTION CODES................................................................. 27

9.1 Introduction..................................................................................................................................27

10. PARAMETERS ACCESSIBLE WITH FUNCTION CODES 03 AND 10H........... 29

10.1 Variables...................................................................................................................................29

10.2 Holding Registers Map.............................................................................................................29

11. PARAMETERS ACCESSIBLE WITH FUNCTION CODE 04.............................. 31

11.1 Signals.......................................................................................................................................31

11.2 Input Registers Map..................................................................................................................31

12. WEB PAGES....................................................................................................... 38

12.1 Overview...................................................................................................................................38

12.2 Login Page................................................................................................................................38

12.3 Welcome Page ..........................................................................................................................40

12.4 Network Configuration Page ....................................................................................................41

12.4.1 IP Address Configuration Page......................................................................................42

12.4.2 SMPT Server Name Configuration Page.......................................................................43

12.4.3 Add Alarm Recipient Configuration Page.....................................................................44

12.4.4 UDA Email Address Configuration Page......................................................................45

12.5 Parameters Page........................................................................................................................46

12.6 Optional Parameters Page.........................................................................................................47

12.7 Event History Web Page...........................................................................................................48

12.8 About Web Page.......................................................................................................................49

12.9 Contact Web Page.....................................................................................................................50

12.10 Website Page.........................................................................................................................51

12.11 Log Off Page.........................................................................................................................52

INDEX...........................................................................................................................53

vi UDA2182 Communications User Guide January 09

Tables

Table 3-1 Configurable Parameters ______________________________________________________ 5

Table 3-2 Setting Up a Static Address ____________________________________________________ 6

Table 3-3 Setting Up DHCP using the Front Panel __________________________________________ 8

Table 4-1 Modbus RTU Message Formats _______________________________________________ 10

Table 7-1 Modbus Double Register Format Selections ______________________________________ 16

Table 7-2 IEEE Floating Point Number Examples in Big Endian Format _______________________ 18

Table 8-1 Modbus/TCP and Modbus RTU Function Codes Definitions_________________________ 21

Table 9-1 Modbus RTU Data Layer Status Exception Codes _________________________________ 28

Table 10-1 Holding Registers Map _____________________________________________________ 29

Table 11-1 Holding Registers Map _____________________________________________________ 31

Table 12-1 Setting a Static IP Address __________________________________________________ 42

Table 12-2 Setting a SMPT Server Name ________________________________________________ 43

Table 12-3 Adding an Alarm Recipient__________________________________________________ 44

Table 12-4 UDA Email Address Configuration____________________________________________ 45

January 09 UDA2182 Communications User Guide vii

Figures

Figure 2-1 Communication Card Location_________________________________________________ 3

Figure 2-2 Ethernet Port Wiring _________________________________________________________ 3

Figure 2-3 Serial Port Wiring ___________________________________________________________ 4

Figure 5-1 Modbus RTU Protocol within a TCP/IP Frame___________________________________ 12

Figure 6-1 IEEE Floating Point Data format______________________________________________ 13

Figure 7-1 IEEE Floating Point Formats_________________________________________________ 17

Figure 12-1 Login Page ______________________________________________________________ 38

Figure 12-2 Welcome Page ___________________________________________________________ 40

Figure 12-3 Network Configuration Page ________________________________________________ 41

Figure 12-4 IP Address Configuration___________________________________________________ 42

Figure 12-5 SMTP Server Name _______________________________________________________ 43

Figure 12-6 Add Alarm Recipient ______________________________________________________ 44

Figure 12-7 UDA Email Address Configuration___________________________________________ 45

Figure 12-8 Monitor Parameters Page___________________________________________________ 46

Figure 12-9 Monitor Optional Parameters Page ___________________________________________ 47

Figure 12-10 Event History Page_______________________________________________________ 48

Figure 12-11 About Page_____________________________________________________________ 49

Figure 12-12 Contact Page____________________________________________________________ 50

Figure 12-13 Honeywell Website Page __________________________________________________ 51

Figure 12-14 Log Off Page ___________________________________________________________ 52

Introduction

January 09 UDA2182 Communications User Guide 1

1. Introduction

1.1 Overview

The UDA2182 provides Modbus communications support on two communication interfaces using the

optional Communication Card.

Serial port provides

•RS422/RS485 multi-drop

•2400 to 115200 programmable baud rate

•Modbus RTU protocol to read signals including PV, Temperature, Alarm Status, outputs, relay

status, etc.

•Read/write four analog and four digital variables (Note 1)

•Can communicate to the P.IE. tool

Ethernet port provides:

•Up to 5 Modbus TCP connections simultaneously

•Ethernet parameters are configured via the front-panel or web pages.

•Web server with up to 10 clients simultaneously

•Web pages (Note 2) setup the Ethernet port settings and monitor readings, alarms, statuses,

events. See Section 12

•Multi-language email to send alarm status changes. Alarm notification to eight email addresses.

These must be configured using web pages signed in as the administrator.

•DHCP: ( Dynamic Host Configuration Protocol) selectable via web page or front-panel

•Firmware upgrade to Main CPU board

•Firmware upgrade to Communications card

•Can communicate to the P.IE. tool

Note 1

There are four analog and four digital variables. These variables can be read and written remotely using

Modbus function codes.

Variables will appear as a selection for various parameters:

•Analog variables can be an alarm source, analog relay source, current output source, monitor

source, math source, auxiliary switch source, PID TRV, and PID remote setpoint.

•Digital variables can be an alarm disable, remote setpoint select, Tune Set2 select, digital relay

source, logic-in source, auxiliary switch select, PID TRC select, PID RSP select, and auto cycle

start source.

Note 2

Web pages (Section 12) provide the following:

•Multiple language support

•“Guest” accessibility for read-only permission

•“Admin” accessibility for read and write permission

•Readings of Inputs, Outputs, and Relay Outputs

•Status of Inputs, Outputs, and Alarms.

•Readings and Status of optional parameters (control, pharma, and auto-cycle)

•List of last twelve events

•Network configuration including IP address, subnet mask, gateway etc.

•Email configuration for alarm event notification

Introduction

2 UDA2182 Communications User Guide January 09

1.2 Specifications

RS422/RS485 Modbus

RTU Slave

Communications Interface

(Optional)

Baud Rate: 2400, 4800, 9600, 19200, 38400, 57600, or 115200 selectable

Data Format:: IEEE floating point and 32-bit integer. Word swap configurable.

Length of Link:

2000 ft (600 m) max. with Belden 9271 Twinax Cable and 120 ohm termination resistors

4000 ft (1200 m) max. with Belden 8227 Twinax Cable and 100 ohm termination resistors

Link Characteristics: Two-wire (half-duplex), multi-drop Modbus RTU protocol, 15 drops maximum or

up to 31 drops for shorter link length.

Modbus RTU slave: Provides monitoring of inputs outputs, statuses, alarms, and variables. Provides

writing of variables for remotely modifying parameter settings.

Ethernet TCP/IP

Communications Interface

(Optional)

Type: 10 or 100 BaseT; auto-speed and auto-polarity sensing

Length of Link: 330 ft. (100 m) maximum. Use Shielded twisted-pair, Category 5 (STP CAT5) Ethernet

cable.

Link Characteristics: Four-wire plus shield, single drop, five hops maximum

IP Address: IP Address is 192.168.1.254 as shipped from the factory

Recommended network configuration: Use Switch rather than Hub in order to maximize UDA Ethernet

performance

Configuration: Ethernet parameters are configured via the front-panel or web pages.

Modbus TCP/IP: Five simultaneous socket connections provide monitoring of inputs outputs, statuses,

alarms, and variables. Provides writing of variables for remotely modifying parameter settings.

Modbus TCP/IP Data Format: IEEE floating point and 32-bit integer. Word swap configurable.

Web server: multiple client support

Web pages: monitoring inputs, outputs, statuses, alarms, and events

Multi-language Email: Alarm notification to eight email addresses. These must be configured using

web pages signed in as the administrator.

DHCP: ( Dynamic Host Configuration Protocol) selectable via web page or front-panel

Autres manuels pour UDA2182

Table des matières

Autres manuels Honeywell Instrument de mesure

Honeywell

Honeywell AutoSet 1500 Manuel utilisateur

Honeywell

Honeywell Minitrend QX Manuel utilisateur

Honeywell

Honeywell Chadwick-Helmuth 8500C Manuel utilisateur

Honeywell

Honeywell COCON 26 DRA-LP/MP Manuel utilisateur

Honeywell

Honeywell DR 4300 Mode d’emploi

Honeywell

Honeywell SEARCHLINE EXCEL PLUS Manuel utilisateur

Honeywell

Honeywell BENDIX/KING KRA 405 Manuel utilisateur

Honeywell

Honeywell Vertex M Note de version

Honeywell

Honeywell BendixKing KLR 10 Manuel utilisateur

Honeywell

Honeywell 04973 Series Manuel

Honeywell

Honeywell DPR180 Manuel utilisateur

Honeywell

Honeywell FlexLine SmartServo 954 Manuel utilisateur

Honeywell

Honeywell E-Mon Comment utiliser

Honeywell

Honeywell SmartLine RM60 Manuel utilisateur

Honeywell

Honeywell SmartLine SLG 700 Manuel utilisateur

Honeywell

Honeywell TC809EA1035 Manuel utilisateur

Honeywell

Honeywell C7355B Manuel utilisateur

Honeywell

Honeywell NK Manuel utilisateur

Honeywell

Honeywell H Series Manuel utilisateur

Honeywell

Honeywell QA 10 DN 25 G I Manuel utilisateur

Honeywell

Honeywell MiniRAE 3000+ Manuel utilisateur

Honeywell

Honeywell MI Wireless Guide de démarrage rapide

Honeywell

Honeywell Vertex M Manuel utilisateur

Honeywell

Honeywell SX Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur