Honeywell STX Mode d'emploi
Programming Guide
Models: STX / SMX
Disclaimer
This document contains Honeywell proprietary information.
Information contained herein is to be used solely for the purpose submitted, and no part of this document or its contents
shall be reproduced, published, or disclosed to a third party without the express permission of Honeywell International Inc.
While this information is presented in good faith and believed to be accurate, Honeywell disclaims the implied warranties
of merchantability and fitness for a purpose and makes no express warranties except as may be stated in its written agree-
ment with and for its customer.
In no event is Honeywell liable to anyone for any direct, special, or consequential damages. The information and specifica-
tions in this document are subject to change without notice.
Copyright 2019 Honeywell International Inc.
1
Contents
1 About this Guide .................................................................................................................4
Supplemental Documentation .............................................................................................4
Notice ..................................................................................................................................4
Documentation Feedback ...................................................................................................4
2 Introduction ..........................................................................................................................6
Features ..............................................................................................................................6
Standards............................................................................................................................7
User Control Levels.............................................................................................................7
Level Definition ....................................................................................................... 7
3 Unpacking.............................................................................................................................10
4 Fastrack Panel Configuration ..........................................................................................12
Fastrack Setup ....................................................................................................................12
5 Commissioning....................................................................................................................16
Commission Zones, Devices and Onboard I/O ............................................... 16
Learn ...................................................................................................................................26
User Management...............................................................................................................26
Configure Level 2 User ........................................................................................... 27
Configuration via Bluetooth .................................................................................................28
Transferring the Configuration File ......................................................................... 28
Sending the Configuration File ............................................................................... 30
Configuration via USB.........................................................................................................31
READ FROM USB.................................................................................................. 31
Error messages ...................................................................................................... 32
Event Log Explorer..............................................................................................................33
Settings ...............................................................................................................................34
6 Administration .....................................................................................................................36
User Management...............................................................................................................36
Level 2 Users.......................................................................................................... 36
Level 3 User............................................................................................................ 36
Forgot Passcode .................................................................................................................36
Reset Master User Passcode ................................................................................. 38
Firmware Update.................................................................................................................39
Wipe Event Log...................................................................................................................41
Error messages...................................................................................................................42
7 Security Instructions..........................................................................................................44
Common Security Threats...................................................................................................44
Tips to Mitigate Security Risk ..............................................................................................44
Security Threads that Affect Honeywell HGR......................................................................45
4
About this Guide
1. About this Guide
This guide is for users trained to program the fire panel to work with connected devices.
1.1 Supplemental Documentation
The table below provides a list of documents for various users of STX / SMX fire panels.
1.2 Notice
The material and instructions covered in this guide have been carefully checked for
accuracy and are presumed to be correct. The images in the document are for reference
purpose only and are subject to change. However, the manufacturer assumes no
responsibility for inaccuracies and reserves the right to modify and revise this document
without notice.
These instructions cover the programming and commissioning of the STX / SMX Fire Alarm
Control Panels (FACP).
For any technical assistance email at morleyindiasupport@honeywell.com.
1.3 Documentation Feedback
Your feedback helps us keep our documentation up-to-date and accurate. If you have any
comments or suggestions about our on-line help or manuals, please e-mail us at
FireSystems.TechPubs@honeywell.com.
On-Line Help - Please include the following information:
• Product name and version number (if applicable)
• Topic title
• The content you think should be corrected/improved
• Detailed suggestions for correction/improvement
Documents - Please include the following information:
• Document part number and title
• Page number and paragraph
• The content you think should be corrected/improved
• Detailed suggestions for correction/improvement
Document Name Document Number
Models: STX / SMX Device Compatibility Document NS-MS-0002
Model: STX Installation Guide NS-MN-0019
Model: SMX Installation Guide NS-MN-0025
Models: STX / SMX User’s Guide NS-MN-0018
Models: STX / SMX Programming Guide (This document) NS-MN-0017
SmartConfig™ PC Application User’s Guide NS-MS-0020
SmartConfig™ Mobile Application FAQ Not Applicable
5
About this Guide
6
Introduction
2. Introduction
The fire alarm control panel is available in two models: STX and SMX.
The STX model
• Comes with a plastic enclosure
• Available in 1 loop (98 devices or 198 devices) and 2 loop configurations
• Has a 5-inch touch screen
• Available in Red and Grey colors
• LED indicators to know the status of power, system, and so on
• Supports 160 zones
The SMX model
• Comes with a metal enclosure
• Available in 1 loop, 2 loop, and 4 loop configurations
• Has a 5-inch touch screen
• Available in Red and Grey colors
• LED indicators to know the status of power, system, and so on
• Supports 160 zones
2.1 Features
Following are some of the features of the fire alarm control panel:
• Connections to one, two, or four Signalling Line Circuit (SLC) loops
• Support for Morley UL variant detectors and modules
• Alarm, trouble, and programmable relays
STX Panel SMX Panel
7
Introduction
• Multi-colour touch screen display
• RS485 connections for wiring annunciators
• RS232 connection for printer
• Firmware upgrade or downgrade through USB
• Portable configuration settings (through USB or Bluetooth)
• Backing up the event logs (through USB or Bluetooth)
• Multi-level access control (Level 1, 2, 3, and 4)
• All sounder deactivation via programming
• 315-080 annunciator support
• 315-040 LED driver for customized graphic annunciators
• Auto-learning capability
• Configuration options: USB storage device, mobile app, and the panel interfaces
• 10000 event logs for SMX
• 5000 event logs for STX
• View pulse width (PW) values
• View voltage and analogue values
• Monitored input support for supervisory
• Printer support
• Set date and time
• Walk test
• Zone disablement
• 160 programmable zones
2.2 Standards
Underwriters Laboratories (UL)
• UL 864 (10th edition) Standard for Control Units
For standards related information, refer to Underwriters Laboratories (UL) documents.
2.3 User Control Levels
2.3.1 Level Definition
The FACP panel has four user control levels: Level 1, Level 2, Level 3, and Level 4.
At all the four levels, the touch display is the primary indicator for the status of installation
and provides detailed information about any current fire alarm, trouble, test, or disablement
condition.
USER LEVEL 1 - All the front panel displays are functional except the control keys.
USER LEVEL 2 - All front panel controls are functional. Some system operation parameters
and functions can be changed. User Level 2 is accessible by entering a passcode from level
1. Maximum 10 users with unique passcodes can be programmed in the panel.
NOTE: The default passcode for LEVEL 2 is 1234.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Honeywell Alarme incendie
Honeywell
Honeywell Silent Knight IntelliKnight 5820XL Manuel utilisateur
Honeywell
Honeywell ESSER 804950 Manuel utilisateur
Honeywell
Honeywell MA Series Manuel utilisateur
Honeywell
Honeywell HW-TG7FS-V Guide d'installation
Honeywell
Honeywell NOTIFIER AM-8000 Manuel du propriétaire
Honeywell
Honeywell HW-TG7LAF02 Guide d'installation
Honeywell
Honeywell 800-04433V1 Instructions de montage
Honeywell
Honeywell Farenhyt Series Manuel utilisateur
Honeywell
Honeywell SILENT KNIGHT SWIFT Manuel utilisateur
Honeywell
Honeywell Notifier LCD2-80 Manuel utilisateur
Honeywell
Honeywell Apex Manuel utilisateur
Honeywell
Honeywell NFS Supra Manuel utilisateur
Honeywell
Honeywell SILENT KNIGHT 5860 Manuel technique
Honeywell
Honeywell Fire-Lite Alarms LCD-80F Manuel utilisateur
Honeywell
Honeywell Fire-Lite BG-12LX Manuel utilisateur
Honeywell
Honeywell NOTIFIER ID61 Manuel utilisateur
Honeywell
Honeywell ESSER IQ8MCP Manuel utilisateur
Honeywell
Honeywell NOTIFIER IDR-M Mode d’emploi
Honeywell
Honeywell SMX-AUS Manuel utilisateur
Honeywell
Honeywell NOTIFIER ID2000 Series Manuel utilisateur
