Honeywell HC900 Manuel utilisateur

12/2018 Power Supply Rack Extension Kit # 51-52-33-149 1

HC900 Controller

Power Supply Rack Extension Installation

PS Rack Extension 900RPE - (current revision number)

Document Number Form: 51-52-33-149

Effective Date: 12/2018

Supersedes: 04/2005

Summary

• Optional field installation kit

• Installed on the rack next to the Primary

Power Supply

• Provides a rack extension to hold a 2nd

(Reserve) Power Supply and Power

Status Module per I/O Rack in order to

maintain power to the rack if the Primary

Power Supply fails

• Allows either Power Supply to be

replaced while maintaining power to the

rack using the other Power Supply

• Available for the 8-Slot and 12-Slot I/O

Racks

• Not available for the 4 Slot I/O Rack

8-Slot Rack

12-Slot Rack

8-Slot Rack

12-Slot Rack

Figure 1 PS Rack Extension Location

Procedure Follow the procedure in Table 1 to install a Power Supply (PS) Rack Extension to

an 8-slot or 12-slot I/O rack.

Table 1 – PS Rack Extension Installation

Step Action

1 Remove power to the rack to be extended.

2 Remove the rack from its mounting

and remove all modules from the

rack. Place the empty rack on a

flat surface with the back plate

down.

Controller CPU or Scanner Module Slot

Power Supply Slot

I/O Modules

Controller CPU or Scanner Module Slot

Power Supply Slot

I/O Modules

2 Power Supply Rack Extension Kit # 51-52-33-149 12/2018

Step Action

3 900R12-0200 (Standard Rack) can

be converted to 900R12R-0200

(Redundant power Supply). Locate

resistors R3,R4, R5 and R6 on the

I/O rack backplane. Cut and remove

the resistors, replace end cap.

4 Remove the screws from the

outside of the I/O rack side plate.

Retain the side plate.

JP21

I/O Rack

Side Plate JP21JP21

I/O Rack

Side Plate

5 Attach the PS extension rack to

the I/O rack with 4 of the screws

(SEMS M3 X 5.0 mm long)

provided in the kit.

Make sure that J3 on the PS

extension rack backplane

meshes with JP21 on the I/O

rack backplane.

J3 JP21

J3J3 JP21

6 Attach the side plate previously

removed from the I/O rack to the

PS extension rack using the 6

screws (Flat Head M3 x 6.0 mm

long) provided in the kit.

Note that the countersunk holes in

the plate should face outward.

J3 JP21

I/O Rack

Side Plate

previously removed

J3 JP21

J3J3 JP21

I/O Rack

Side Plate

previously removed

7 You will need to drill two mounting

holes (same size mounting holes

as the main rack) for the 900RPE

rack.

Place the updated rack in

position and mark the 2

mounting hole locations (top

and bottom of rack of the 900

RPE extension).

Remove the rack and drill the

mounting holes.

900RPE Rear

Mounting Plate

900RPE Rear

Mounting Plate

8 Re-install the Power Supply, CPU or Scanner and I/O modules.

9 If available, install the new Power Supply Module and Power Status Module into the 900RPE

rack.

10 Mount the updated rack assembly and connect a separate power source with disconnect to the

new power supply.

Autres manuels pour HC900

Autres manuels Honeywell Contrôleurs

Honeywell

Honeywell HA40 Manuel utilisateur

Honeywell

Honeywell VK41 V Series Manuel utilisateur

Honeywell

Honeywell Centra Line EAGLE Manuel d'installation et d'exploitation

Honeywell

Honeywell HC900 Guide de l'utilisateur

Honeywell

Honeywell homexpert Rondostat COMFORT+ HR30 Manuel utilisateur

Honeywell

Honeywell MSR PolyGard 2 MGC2-K Manuel utilisateur

Honeywell

Honeywell MIWI350 Manuel utilisateur

Honeywell

Honeywell ScanDome HTX-5000 Manuel utilisateur

Honeywell

Honeywell T7560B Manuel utilisateur

Honeywell

Honeywell ML9185 Manuel utilisateur

Honeywell

Honeywell UMC800 Manuel utilisateur

Honeywell

Honeywell M847D Manuel utilisateur

Honeywell

Honeywell Aquastat L4006 Manuel utilisateur

Honeywell

Honeywell Electronic Aquastat L7148F Manuel utilisateur

Honeywell

Honeywell Excel 10 W7752D Manuel utilisateur

Honeywell

Honeywell UDC3300 Manuel utilisateur

Honeywell

Honeywell ML6874 Manuel d'utilisation

Honeywell

Honeywell Experion PKS Manuel d'instructions

Honeywell

Honeywell CIPer 50 Manuel utilisateur

Honeywell

Honeywell CentraLine LYNX BACnet CLLYUB1012S Manuel d'utilisation

Honeywell

Honeywell UDC 2300 Manuel utilisateur

Honeywell

Honeywell Zio TR70 Manuel utilisateur

Honeywell

Honeywell 5000 Series Manuel utilisateur

Honeywell

Honeywell PCR-300 Manuel utilisateur

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur