Honeywell Enhanced Micro TDC 3000 Manuel utilisateur

8-Node

Enhanced Micro TDC 3000

User’s Manual

MT11-520

Implementation

8-Node Micro TDC 3000

8-Node

Enhanced Micro TDC 3000

User’s Manual

MT11-520

Release 500

CE Compliant

9/95

Revision 01 – September 15, 1995

While this information is presented in good faith and believed to be accurate,

Honeywell disclaims the implied warranties of merchantability and fitness for a

particular purpose and makes no express warranties except as may be stated in its

written agreement with and for its customer.

In no event is Honeywell liable to anyone for any indirect, special or consequential

damages. The information and specifications in this document are subject to

change without notice.

Enhanced Micro TDC 3000 User’s Manual 9/95

About This Publication

This publication is provided for users of the Enhanced Micro TDC 3000 Control System. Basic

information relating to installation, checkout, implementation, and operation are covered.

This publication is to be used in conjunction with the remainder of the TDC 3000Xbookset.

This publication supports MicroTDC 3000 system software release 500. It also contains hardware

information about the ElectroMagnetic Compatibility Directive for European standards.

Any equipment designated as “CE Compliant” complies with the European Union EMC and

Health and Safety Directives. All equipment shipping into European Union countries after

January 1, 1996 require this type of compliance—denoted by the “CE Mark.”

Enhanced Micro TDC 3000 User’s Manual 9/95

Standard Symbols

Scope The following defines standard symbols used in this publication

ATTENTION Notes inform the reader about information that is required, but not

immediately evident

CAUTION Cautions tell the user that damage may occur to equipment if proper care is

not exercised

WARNING Warnings tell the reader that potential personal harm or serious economic

loss may happen if instructions are not followed

53893

OR Ground connection to building safety ground

53894 Ground stake for building safety ground

53895

DANGER

SHOCK HAZARD Electrical Shock Hazard—can be lethal

53896

DANGER

HIGH VOLTAGE Electrical Shock Hazard—can be lethal

53897 Rotating Fan—can cause personal injury

Table of Contents

Enhanced Micro TDC 3000 User’s Manual i9/95

1 INTRODUCTION AND OVERVIEW

1.1 General Description

1.1.1 Basic Enhanced Micro TDC 3000 Systems

1.1.2 Options to the System

1.1.3 The Operator’s Keyboard

1.1.4 The Engineer’s Keyboard

1.1.5 The Local Control Network

1.2 Operating Practices and Housekeeping

1.2.1 Before Startup

1.2.2 After Startup

1.3 Circuit Card Handling

1.4 Cartridge Disk Handling and Storage

1.4.1 Cartridge Loading and Removal

1.4.2 Cartridge Media Protection

1.5 EMC Directive

1.6 Related Publications

2 SITE PREPARATION AND INSTALLATION

2.1 Storage Conditions

2.2 Site Requirements

2.2.1 Dimensions and Weight

2.3 Electrical Requirements

2.3.1 AC Voltage Options

2.3.2 Frequency

2.3.3 Current in Amperes at 120 Vac

2.4 Unpacking

2.5 Site Layout

2.6 Installation

2.7 Tower #1 Equipment Cabling

2.7.1 Cabling - Standard

2.7.2 Cabling - EMC Directive

2.7.3 Cabling EPDG I/O Board - Standard

2.7.4 Cabling EPDGC I/O Board

2.7.5 Operator Keyboard Cabling

2.7.6 Printer Cabling

2.7.7 Color Monitor Cabling

2.7.8 Engineer’s Keyboard Cabling

2.7.9 TPLCN Cabling

2.7.10 Touchscreen Cabling

2.7.11 Trackball Cabling

2.7.12 Process Cabling

2.7.13 Cabling Diagram and Parts List–Track Ball

2.7.14 Cabling Diagram and Parts List–Touch

Table of Contents

Enhanced Micro TDC 3000 User’s Manual ii 9/95

2.8 Tower #2 Equipment Cabling

2.8.1 Optional Universal Station Upgrade

2.8.2 Optional Redundant Network Interface Module

2.8.3 Optional Computer Gateway CLI I/O

2.8.4 Optional Computer Gateway CLI/A I/O

2.8.5 Optional PLC Gateway

2.9 Optional LCN Upgrade

2.10 Installation Wrap-Up

3 CHECKOUT

3.1 Power-On Tests

3.1.1 Tower #1 Electronics Checks

3.1.2 Tower #2 Electronics Checks

3.1.3 Color Monitor Check

3.1.4 Printer Checks

3.1.5 Cartridge Drive Checks

3.2 System Checkout Wrap-Up

4 IMPLEMENTATION

4.1 Implementation Overview

4.1.1 Database Configuration

4.1.2 The Implementation Process

4.2 System Startup

4.2.1 Local Control Network Configuration

4.2.2 Prebuilt Network Configuration Data

4.3 Load Gateways and Modules

4.3.1 Loading the AM

4.3.2 Loading the NIM

4.4 Load the Process Manager

4.4.1 Standard Double-Sided Nonredundant PM Cabinet

4.4.2 Expanded Standard PM Cabinet

4.4.3 UCN/PM Box Point Configuration Data

4.5 Loading the PLCG or CG

4.6 Data Point Building

Table of Contents

Enhanced Micro TDC 3000 User’s Manual iii 9/95

4.7 Custom Functions

4.7.1 Build Pictures

4.7.2 Build Free Format Logs

4.7.3 Configure Buttons

4.7.4 Prepare User-Written Programs

4.8 Area Database Configuration

4.8.1 Install the Area Database

4.8.2 Area Database Prebuilt Configuration Data

4.9 Configuration Completion

5 OPERATIONAL GUIDELINES

5.1 The Engineering and Operator Personalities

5.1.1 How to Load and Change US Personalities

5.2 Loading the Modules and Gateways

5.2.1 Loading the Application Module

5.2.2 Loading Network Interface Module and UCN Devices

5.2.3 Loading the History Module

5.3 System Operation

5.3.1 Calling Up Operating Displays

5.3.2 The Area Database

5.3.3 Keyswitch Access Levels

5.4 Monitor Operation

5.4.1 IDEK Model MF-5221

5.4.2 IDEK Model MF-8221

5.4.3 HITACHI Model HM-4821-D

6 SERVICE

6.1 Overview

6.2 Field Adjustments

6.2.1 LCN Node Addressing (Pinning)

6.2.2 UCN Node Addressing (Pinning)

6.2.3 21-Inch Monitor Adjustments

6.3 Cleaning

6.3.1 Air Filter Removal and Cleaning

6.4 Troubleshooting

6.5 Spare Parts

6.6 Hardware Verification Test System (HVTS) Overview

A APPENDIX A PREBUILT POINTS

B APPENDIX B BUTTON CONFIGURATION

INDEX

Enhanced Micro TDC 3000 User’s Manual iv 9/95

Table des matières

Autres manuels Honeywell Contrôleurs

Honeywell

Honeywell HercuLine 2000 Series Manuel utilisateur

Honeywell

Honeywell PW-6000 Manuel de l'opérateur

Honeywell

Honeywell HC900 Guide de l'utilisateur

Honeywell

Honeywell LP1501 Manuel de l'opérateur

Honeywell

Honeywell PRO3200 Manuel de l'opérateur

Honeywell

Honeywell UDC1200 MICRO-PRO Manuel utilisateur

Honeywell

Honeywell Zio TR70 Manuel utilisateur

Honeywell

Honeywell VR4305 Manuel utilisateur

Honeywell

Honeywell MS4620F Manuel utilisateur

Honeywell

Honeywell C Manuel utilisateur

Honeywell

Honeywell HCU 23 Manuel utilisateur

Honeywell

Honeywell Temaline TS2 Manuel utilisateur

Honeywell

Honeywell HCE80R Manuel utilisateur

Honeywell

Honeywell ComfortPoint Open CPO-VAV2A Manuel utilisateur

Honeywell

Honeywell Tema-Voyager Multi VMC Series Manuel utilisateur

Honeywell

Honeywell ControLinks R7999A Manuel utilisateur

Honeywell

Honeywell Spyder 5 Manuel utilisateur

Honeywell

Honeywell B Manuel utilisateur

Honeywell

Honeywell UDC3300 Manuel utilisateur

Honeywell

Honeywell Pressuretrol P7810C Manuel utilisateur

Honeywell

Honeywell HVC0002 Manuel utilisateur

Honeywell

Honeywell P906C Manuel d'utilisation

Honeywell

Honeywell HON 5020 Manuel utilisateur

Honeywell

Honeywell 301C Manuel utilisateur

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur