Honeywell THOR VM1 Manuel utilisateur

Thor VM1 Field Replaceable Front Panel

The front panel of the Thor VM1 is field replaceable. The front panel assembly contains the keyboard, touchscreen and optional

defroster. Should any of these components fail, the front panel assembly can easily be replaced to minimize downtime. The replacement

front panel is available in several configurations.

Requirements - User Supplied

• Torquing tool capable of measuring inch pounds

• #2 Phillips screwdriver bit

Replacing Front Panel

1. If the Thor VM1 has a Windows CE operating system, place the Thor VM1 in Suspend by pressing the Power button on the front of

the Thor VM1. If the Thor VM1 has a Windows Embedded Standard operating system, select Shut Down from the Windows Shut

Down menu.

2. Remove the Thor VM1 from the Quick Mount Smart Dock by pulling

down on the red quick release handle, lifting the bottom of the Thor VM1

away from the dock, and lifting the Thor VM1 up and away from the

dock.

3. Place the Thor VM1 face down on a clean, well lit stable surface.

4. Use a #2 Phillips bit to loosen the captive M3 screws

on the tethered access panel with the SIM label.

SIM Label

5. Remove the tethered access panel from the opening and press the UPS battery disconnect button located

just below the SIM card installation slot.

6. Reinstall the access panel cover. Torque the M3 screws to 4-5 inch pounds using a #2 Phillips bit.

7. Turn the Thor VM1 face up.

8. Use a #2 Phillips bit to loosen the fourteen (14) captive

M3 screws that hold on the front panel.

9. Carefully lift the front panel away from the device.

11 12

13 14

10. Position the replacement front panel so the tab on the back of the front panel lines up with the slot on the Thor VM1. Be sure the two

wiring connectors are also aligned.

11. Gently press the front panel into place.

12. Tighten the fourteen (14) captive M3 screws in the order shown in the figure for step 8 above. Use a #2 Phillips bit and torque the

screws to 6-7 inch pounds.

13. Reinstall the Thor VM1 in the dock. When the Thor VM1 is placed in the powered dock, the UPS battery automatically reconnects.

14. Press the Power button on the front of the Thor VM1.

15. The Thor VM1 automatically recognizes any change in keyboard configuration.

16. If the Thor VM1 has a Windows CE operating system and the defroster configuration has changed, use the Test button on the

Peripherals control panel to update the Thor VM1's configuration. Select Start > Settings > Control Panel > Peripherals and tap

the Test button.

17. The Thor VM1 is ready for use.

Thor VM1 with Front Panel Removed Back of Thor VM1 Front Panel

Slot Wiring Connector

TabWiring Connector

Autres manuels pour THOR VM1

Table des matières

Autres manuels Honeywell Panneau de contrôle

Honeywell

Honeywell NOTIFIER AM1000 Manuel utilisateur

Honeywell

Honeywell nfs2-3030 Manuel du propriétaire

Honeywell

Honeywell Galaxy 16 Manuel utilisateur

Honeywell

Honeywell IQ8Control C Manuel utilisateur

Honeywell

Honeywell VARIODYN D1 Comprio Manuel technique

Honeywell

Honeywell Silent Knight 5860 Manuel

Honeywell

Honeywell HCM 200 Manuel utilisateur

Honeywell

Honeywell Fire-Lite Alarms MS-9200 Manuel utilisateur

Honeywell

Honeywell Silent Knight RA-2000 Manuel utilisateur

Honeywell

Honeywell Domonial cmi Manuel utilisateur

Honeywell

Honeywell MS-10UD Series Manuel utilisateur

Honeywell

Honeywell MiniZone EMM-3 Manuel d'utilisation

Honeywell

Honeywell VISTA-128BPT Guide de démarrage rapide

Honeywell

Honeywell Securit 800L Manuel utilisateur

Honeywell

Honeywell H-S81-HS Manuel utilisateur

Honeywell

Honeywell MS-9200UDLSE Manuel utilisateur

Honeywell

Honeywell NOTIFIER ID2000 Series Mode d’emploi

Honeywell

Honeywell TrolaTemp MABS EZ-2 Manuel d'utilisation

Honeywell

Honeywell Fire-Lite Alarms MRP-2001 Manuel utilisateur

Honeywell

Honeywell ENVIRAZONE PANEL W8835 Manuel d'utilisation

Honeywell

Honeywell Symphony Mode d’emploi

Honeywell

Honeywell Farenhyt Series Manuel technique

Honeywell

Honeywell Morley-IAS ZX Series Guide de démarrage rapide

Honeywell

Honeywell IFP-2100ECS Caractéristiques techniques

Manuels Panneau de contrôle populaires d'autres marques

RDZ

RDZ PC-HRX Manuel utilisateur

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manuel technique

Efka

Efka Variocontrol V810 Manuel utilisateur

Cebora

Cebora 208-10 Manuel utilisateur

AMX

AMX AutoPatch CP-15 Manuel utilisateur

Satel

Satel CA-6 KLED-S Manuel utilisateur

Evolution

Evolution IQ plus 800 Manuel utilisateur

Fagor

Fagor 8040 TCO CNC Manuel utilisateur

Trane

Trane ComfortLink II XL950 Control Manuel utilisateur

AKO

AKO PROCool AKO-17635-2 Manuel utilisateur

ABB

ABB 6136/30M-101 Manuel utilisateur

Telikou

Telikou BK-603 Belt Pack Manuel utilisateur

Mapei

Mapei Mapeheat Thermo Touch Manuel utilisateur

Bosch

Bosch D9412GV4 Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manuel utilisateur

Sminn

Sminn BOX L VF1L EI Manuel utilisateur

Balboa

Balboa TP600 Manuel utilisateur

Nice

Nice HSCU1 Caractéristiques techniques