Honeywell F500 Manuel utilisateur

PRODUCT DATA/OWNER’S GUIDE

68-0263-2

® U.S. Registered Trademark

F500 Whole House/

Light Commercial

HEPA Filtration System

APPLICATION

The F500 Whole House/Light Commercial HEPA Air Cleaner

connects to the return air duct of a forced air system. The

HEPA filter captures 99.97percent of the particles from the air

that passes through it.

FEATURES

• HEPA media captures at least 99.97 percent of 0.3

micron particles that pass through it.

• Application for forced air systems.

• Power cord plugs into grounded 120 Vac electrical

outlet.

• Requires no maintenance except periodic media filter

replacement.

• Quick and easy media filter replacement.

• Wall-mounted AIRWATCHTM Indicator included

provides filter change reminders.

• Three-filter system:

— Activated carbon filter for odors.

— High-efficiency pleated pre-filter extends HEPA fil-

ter life.

— HEPA filter traps at least 99.97 percent of the

0.3 micron particles that pass through it.

• Easy installation.

• Includes four isolation straps.

• Rugged steel cabinet.

• Quiet operation.

• Model available with fully-insulated cabinet for

installation in unconditioned environments.

Contents

Application and Features...................................................1

Specifications ....................................................................2

Ordering Information .........................................................2

Planning the Installation ....................................................3

Installation.........................................................................4

Startup and Checkout........................................................6

Troubleshooting.................................................................6

Parts List ...........................................................................7

F500 WHOLE HOUSE/ LIGHT COMMERCIAL HEPA FILTRATION SYSTEM

68-0263-2 2

ORDERING INFORMATION

When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the

TRADELINE® Catalog or price sheets for complete ordering number.

If you have additional questions, need further information, or would like to comment on our products or services, please write or

phone:

1. Your local Automation and Control Solutions Sales Office (check white pages of your phone directory).

2. Honeywell Customer Relations

1885 Douglas Drive North MN10-1461

Minneapolis, Minnesota 55422-4386

In Canada—Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Scarborough, Ontario M1V 4Z9.

International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France,

Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.

SPECIFICATIONS

IMPORTANT

The specifications given in this publication do not

include normal manufacturing tolerances. Therefore,

this unit may not exactly match the listed specifica-

tions. Also, this product is tested and calibrated

under closely controlled conditions, and some minor

differences in performance can be expected if those

conditions are changed.

TRADELINE® Models available:

F500 Whole House/Light Commercial HEPA Filtration System

includes:

HEPA filter, 2 in. pleated prefilter, carbon-odor filter, and

motor/blower. Isolation mounting straps and

HEPA AIRWATCH™Indicator are also included.

F500A: Standard cabinet.

F500B: Insulated cabinet.

Color: White.

Dimensions: See Fig. 1.

Electrical Ratings:

Input Power Requirements: 120 Vac, 60 Hz; 1.98A maximum.

Air Flow:

F500A,B: 400 cfm nominal.

Efficiency:

Pleated Prefilter: MERV 8 at 374 fpm.

HEPA Filter: Media removes 99.97 percent of 0.3 micron parti-

cles from the air that pass through it.

Temperature Rating:

F500A is intended for mounting in conditioned spaces.

F500B cabinet allows installation outside of conditioned

space.

Approvals:

CSA.

Included Accessories:

HEPA AirWatch™ Indicator.

Four isolation mounting straps.

Replacement Media:

For optimum system performance, replace filters according to

Table 1. Use the HEPA AIRWATCH™ Indicator to deter-

mine when it is time to change each filter.

Fig. 1. F500 dimensions.

Whole House HEPA Filtration System

MOUNTING STRAP

12-1/2

(328)

(254)

M2057

(102)

PROVIDE 26-1/2 (673) SERVICE CLEARANCE IN FRONT OF UNIT

(483)

25-1/2

(648)

F500 WHOLE HOUSE/ LIGHT COMMERCIAL HEPA FILTRATION SYSTEM

3 68-0263-2

PLANNING THE INSTALLATION

Selecting Mounting Position and Location

The F500 can be suspended from exposed ceiling joists or the

ceiling surface, or it can be floor-mounted.

1. Install the F500A in a conditioned space or the F500B in

an unconditioned space using these guidelines.

2. Plan the unit location to minimize duct lengths.

3. Locate an existing electrical outlet with the appropriate

current rating to plug in the power cord. (If an outlet is

not available, have a qualified electrician install one.)

4. Choose a location that is readily accessible for checking

and replacing the filter. (Allow at least 26-1/2 in. (673

mm) clearance in front of the unit.)

Planning Ducting

The F500 can be mounted to the whole-house forced air

system using a bypass configuration or can be independently

ducted to stand alone. See Fig. 2, 3, and 4 for typical

installations.

• The Whole House/Light Commercial HEPA air cleaner has

4 in. x 10 in. duct flanges to easily attach the external

ductwork.

• The intake port can be moved to a more convenient

location, if necessary:

— Simply cut a new 4 in. x 10 in. hole in the desired loca-

tion and block off the old hole.

— Reattach the duct flange over the new hole.

• A transition can be used to connect round ducting to the

Whole House/Light Commercial HEPA System.

— Keep duct sizes as large as possible throughout the

installation (8 in. minimum diameter ducting is recom-

mended).

— Keep intake and exhaust duct runs as short as possi-

ble with few bends or elbows.

• The F500 can be installed with a heat recovery ventilator.

See Fig. 4.

Fig. 2. Typical F500 bypass installation.

Fig. 3. Typical F500 independent installation.

Table 1. Replacement Media Recommendations.

Filter (in in.) Part Number Replacement Interval

Normal Light Duty

Carbon-Odor Filter (24 x 12) 32006026-001 3 months 4 months

Pleated Prefilter (24 x 12 x 2) 32006027-001 12 months 16 months

HEPA Filter (24 x 12) 32006028-001 3 years 5 years

S688A1007

SAIL SWITCH

(OPTIONAL)

HIGH EFFICIENCY

AIR CLEANER

120 VAC 60 HZ SUPPLY WITH GROUN

M20263A

RETURN AIR

F500

AIR

HANDLER

(FURNACE)

15 AMP LIGHT SWITCH

120 VAC 60 HZ SUPPLY WITH GROUND

M2057

F500

F500 WHOLE HOUSE/ LIGHT COMMERCIAL HEPA FILTRATION SYSTEM

68-0263-2 4

Fig. 4. Typical F500 bypass installation with heat recovery

ventilator.

INSTALLATION

When Installing this Product…

1. Read these instructions carefully. Failure to follow these

instructions could damage the product or cause a haz-

ardous condition.

2. Check the ratings on the product to make sure the prod-

uct is suitable for your application.

3. Installer must be a trained, experienced service techni-

cian.

4. After installation is complete, check out product opera-

tion as provided in these instructions.

Unpacking Whole House/Light Commercial

HEPA Filtration System

The Whole House/Light Commercial HEPA Filtration System

is shipped fully assembled. Check that all the components are

included. The carton contains the following:

• F500A or F500B Whole House/Light Commercial HEPA

Filtration System.

• Activated carbon-odor filter, pleated prefilter, HEPA filter.

• HEPA AIRWATCH™ Indicator.

• Four isolation mounting straps.

• Literature.

Mounting and Ducting

1. Mount four vibration isolation straps to the side of the

HEPA System using the mounting screws located on

the cabinet.

2. Securely fasten the other ends of the straps to the floor

joists with wide-head nails or screws (not supplied); be

sure the unit is level.

3. Connect the HEPA System to the return air duct. See

Fig. 1 and 2. Seal all duct joints with caulk, mastic, or

high quality foil duct tape.

Installing Whole House/Light Commercial HEPA

Filtration System Electrical Connections

The F500 has a 3-prong, 120 Vac connector plug with ground.

If further wiring is required, contact a qualified electrician to

make all electrical connections.

IMPORTANT

Be sure the unit is grounded correctly.

The F500 can be installed either to run continuously or to run

only when the HVAC system blower is operating.

• To run the air cleaner continuously, simply plug the air

cleaner into a 120 Vac outlet. The unit turns on and

operates continuously when the power switch is turned on.

• To run the air cleaner only when the system blower is on,

use an optional Honeywell S688A1007 Sail Switch in the

return air duct. See the S688A product literature for correct

installation procedures.

Fig. 5. F500 internal wiring diagram.

S688A1007

SAIL SWITCH (OPTIONAL) 120 VAC 60 HZ SUPPLY

WITH GROUND

RETURN AIR

FRESH AIR

HEAT

RECOVERY

VENTILATOR F500

HIGH EFFICIENCY

AIR CLEANER

M20264

AIR

HANDLER

(FURNACE

)

ON/OFF

SWITCH DOOR

INTERLOCK

BLACK

GREEN

WHITE

M20265

TERMINAL

BLOCK

CAPACITOR

FAN

MOTOR POWE

CORD

BROWN

WHITE

BLACK

BLUE

F500 WHOLE HOUSE/ LIGHT COMMERCIAL HEPA FILTRATION SYSTEM

5 68-0263-2

Installing HEPA AIRWATCH™ Indicator

Mount the HEPA AIRWATCH™ Indicator next to the

thermostat or in any other convenient location in the home

living area. The battery-operated device has no external

electrical requirements.

1. Remove the AIRWATCH Indicator from the base:

a. Press the tab on the bottom edge of the base.

b. Pull off the bottom of the front cover.

2. Position the base on the wall in the desired mounting

position.

3. Using the holes in the base as a template, mark the

locations for the anchors and screws provided.

4. Drill the holes (3/16 in.) and install the screw anchors

provided.

5. Position the base over the holes and install the screws

to firmly secure the base to the wall.

NOTE: Jumper is factory-installed on pins 1 and 2 for normal

usage.

6. Move the jumper to pins 2 and 3, if desired, for light duty

filter change intervals as shown in Table 2.

7. Install two AAA alkaline batteries (provided) in the har-

ness on the back of the device.

8. Observe that the device performs a self-test, beeping

and flashing the LCD display.

9. To start the timers, press and hold the black reset button

on the bottom of the device for five seconds or until the

display stops flashing.

10. Observe the battery LCD (see Fig.5):

a. On solidly means the unit is correctly powered.

a. Flashing indicates the battery requires replacing.

11. Observe the AIRWATCH (see Fig. 6):

a. Beep every ten minutes when an LCD is flashing.

b. Beeping indicates need to replace the system part

that corresponds with the flashing LCD.

NOTES:

— When batteries need replacing, replace them

within 30 seconds of removal to maintain the cor-

rect indicator time.

— After 30 seconds of replacing the batteries, if the

LCD is blank, remove and install new batteries.

— When replacing other parts, press and hold the

black button on the bottom of the device to reset

the timer after replacing the parts.

Fig. 6. HEPA AIRWATCH™ Indicator.

Table 2. Filter Change Intervals.

Filter Normal (Factory

Setting) Light Duty

Carbon odor filter 3 months 4 months

Pleated prefilter 12 months 16 months

HEPA filter 3 years 5 years

On/Battery

Odor Filter

Prefilter

HEPA Filter

Whole House HEPA Filtration System

Honeywell.com/yourhome

M20580

F500 WHOLE HOUSE/ LIGHT COMMERCIAL HEPA FILTRATION SYSTEM

68-0263-2 6

STARTUP AND CHECKOUT

After the Whole House/Light Commercial HEPA System is

installed, with the ductwork in place and the unit plugged into

a correctly grounded outlet:

1. Be sure filters are installed in correct locations and ori-

ented correctly. (Note the air flow direction arrows on

the prefilter and the HEPA filter.)

2. Turn the On/Off switch to the On position.

3. If interconnected to the HVAC system blower, turn on

the system blower.

4. Verify that the Whole House/Light Commercial HEPA

Air Cleaner turned on.

TROUBLESHOOTING

See Table 3 for troubleshooting guide.

Table 3. Troubleshooting Guide.

Symptom Cause Solution

Poor airflow Filters plugged Remove and replace filter(s).

Maintain filters at regular intervals.

Poor power supply at the site. Have electrician check supply voltage at outlet.

Ductwork is restricting airflow. Check duct installation.

AIRWATCH beeping

and/or flashing Battery or filter needs replacing. Observe which LCD is flashing.

Replace the battery or filter, as indicated.

F500 WHOLE HOUSE/ LIGHT COMMERCIAL HEPA FILTRATION SYSTEM

7 68-0263-2

PARTS LIST

Fig. 7. Illustrated Parts List.

See Table 4 and Fig. 7 for Parts List.

Table 4. Parts List.

Illustrated Parts

List No. Part Number Description

132005012-001 HEPA AIRWATCH™ Indicator

232006670-001 Blower Motor Assembly

3 32006026-001 Carbon-Odor Filter

432006027-001 Pleated Prefilter

532006028-001 HEPA Filter

M20575

On/Battery

Odor Filter

Prefilter

HEPA Filter

Whole House HEPA Filtration System

Honeywell.com/yourhome

68-0263-2 G.H. Rev. 4-04 www.honeywell.com/yourhome

Automation and Control Solutions

Honeywell Honeywell Limited-Honeywell Limitée

1985 Douglas Drive North 35 Dynamic Drive

Golden Valley, MN 55422 Scarborough, Ontario

M1V 4Z9

Printed in U.S.A. on recycled

paper containing at least 10%

post-consumer paper fibers.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Honeywell Purificateur d'air

Honeywell

Honeywell F50F Manuel utilisateur

Honeywell

Honeywell HPA100WE Manuel utilisateur

Honeywell

Honeywell HPA830 Manuel utilisateur

Honeywell

Honeywell THE DOCTOR'S CHOICE HPA090 Series Manuel utilisateur

Honeywell

Honeywell F59A Manuel utilisateur

Honeywell

Honeywell ENVIRACAIRE HTT-022 Manuel utilisateur

Honeywell

Honeywell HPA-050 Series Manuel utilisateur

Honeywell

Honeywell enviracare 61500 Series Manuel utilisateur

Honeywell

Honeywell 51500 Manuel utilisateur

Honeywell

Honeywell 40100 - SilentComfort Dual Air Filter System Instructions d'installation

Honeywell

Honeywell Enviracaire 17005 Manuel utilisateur

Honeywell

Honeywell 69-1866-01 Guide de démarrage rapide

Honeywell

Honeywell F52F Guide de démarrage rapide

Honeywell

Honeywell HPA250 Series Manuel utilisateur

Honeywell

Honeywell HHT-100 - HEPA Air Purifier Manuel d'installation et d'exploitation

Honeywell

Honeywell Quiet Clean TOWER Manuel utilisateur

Honeywell

Honeywell F116 Manuel d'utilisation

Honeywell

Honeywell HFD28X Manuel utilisateur

Honeywell

Honeywell 16200 - Consumer Products - Room Air... Manuel utilisateur

Honeywell

Honeywell AIR GENIUS Manuel utilisateur

Honeywell

Honeywell 10200 Series Manuel utilisateur

Honeywell

Honeywell HPA060 Series Manuel utilisateur

Honeywell

Honeywell F111 Manuel d'utilisation

Honeywell

Honeywell HPA600 series Instructions d'installation

Manuels Purificateur d'air populaires d'autres marques

IKEA

IKEA UPPÅTVIND Manuel utilisateur

Nash

Nash AP-1 PureSmart Manuel utilisateur

LG PH-U450 Series Manuel utilisateur

DeLonghi

DeLonghi DDSX 220WFA Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Manuel utilisateur

Sharp

Sharp FU-40SE Manuel utilisateur

Philips

Philips AC2721 Manuel utilisateur

Hitachi

Hitachi EP-A3000 Manuel utilisateur

TruSens

TruSens Z-2000 Manuel utilisateur

Motorola

Motorola MBP87SN Manuel utilisateur

Beko

Beko ATP 7100I Manuel utilisateur

Carrier

Carrier INFINITY 1620 Manuel utilisateur

AtmosAir

AtmosAir P2002 Manuel utilisateur

Winix

Winix NK300 Manuel utilisateur

Friedrich

Friedrich C-90A Instructions d'utilisation et d'installation

Surgically Clean Air

Surgically Clean Air JADE2.0 Manuel utilisateur

Base aire

Base aire 555 Pro Manuel utilisateur

Champion

Champion CP25 Manuel utilisateur