Hommie S2 Manuel utilisateur
Hommie
Model: S2
User Manual
English
Deutsch
Français
Italiano
Español
日本語
01/16
17/33
34/50
51/66
67/82
83/96
Content
Thank you for purchasing this product. Please read this user manual
carefully before use and keep this instruction for future reference. If you
have any problem about this product, please feel free to contact us at
hommiehk@hotmail.com.
Recommendations of Wearing Watch
1. Please wear the bracelet on the wrist, approx. 2cm away from the ulna.
The heart rate sensor is close to the skin and cannot be shaken. It is not
recommended to wear too tight. That will affect the blood flow, and then
affect the accuracy of heart rate measurement.
2. Please confirm there is no dirt on the bottom of the heart rate sensor
during measurement. Skin color, hair density, tattoos and scars may affect
the accuracy of the test results. Please re-measure.
Bracelet Host Schematic Diagram
Turn ON/OFF
Turn on: Press the side key for 5 seconds or plug in the charger for charging.
Turn off: Press the side key for 5 seconds to turn off the bracelet.
Full Screen
Touch
Power
Button/Return
Heart Rate
Sensor
Charging
Contact
1
2
Charging Bracelet
1. Attach the equipped magnetic charger
to the metal contact on the back of the
bracelet, and insert the other end of the
charger into USB wall charger or USB
interface of computer.
2. Screen displays “Charging”.
Note: Do not directly look at the blinking
sensor light when charging, which may
cause eye irritation.
Operation Instruction
1. Downloading APP
2 Ways:
1). Scan the QR code with mobile phone and download APP.
2). iOS system user can download “FunDo” in APP store.
Android system user can directly search for “FunDo” in the
browser and download it.
Note: mobile phone must support Android 5.1 or iOS 8.0 or
above and Bluetooth 4.0 or above.
2. Binding Bracelet to APP
Note: You need to bind your bracelet in this APP, not directly via phone's
Bluetooth connection.
3
4
1). Click on the "More" interface
in the “Fundo” APP. And select
“Add device”.
2). Click on your device S2 in the
scanned device list.
3).A Bluetooth pairing request will
appear in iOS system. Click "Pair"
for Bluetooth pairing. Android
system will directly pair.
4). Binding is complete and start to
use.
5
6
☆Bluetooth Auto Reconnection
1). There is no reminder on the bracelet when out of the Bluetooth
connection range. However, Bluetooth will automatically reconnect when
the bracelet reaches the valid range of the Bluetooth connection.
2). If you close the background application or restart the phone or click on
“one click clean-up” of the phone, you need to enter “Fundo” APP again.
And Bluetooth will automatically reconnect within the valid range of
Bluetooth connection.
Note: Click on the binding device. For Android system, the bracelet can be
disconnected from your phone by clicking on the selected device model.
For iOS system, after disconnection, you will also need to click “Setting --
Bluetooth” and click the symbol on the right to choose to ignore this
device.
3. Weather & Time Synchronization
When the bracelet is paired with and connected to APP for the first time, it
will automatically sync the phone's time, date, steps, calories and weather.
If you disconnect it from phone for a long time, the weather information
will not be updated. You need to connect it to the APP to get the data.
4. Palming Screen-on
The function is turned on by default. After connected to APP, you can turn
on or off this function in the APP to control this function in the bracelet. It
is also allowed to turn this function on or off manually in the bracelet, but
the APP will not be affected.
5. Time Display Interface Switching
Long press time interface for 3 seconds, slide left and right to select, then
click the screen to confirm and save.
7
8
6. Shortcut Interface of Time Interface
Swipe down on the time interface to quickly enter setting, do not disturb
mode setting, screen brightness adjustment and battery status display.
1). Click the left icon to enter setting interface.
2). Click the middle icon to turn on/off the do not disturb mode. Turn on
the do not disturb mode and find out if there is a vibration reminder and
alarm for the bracelet .
3). Click the right icon to adjust the brightness of screen.
7. Message
After connected to Fundo APP, you can view messages, incoming calls,
information sent by SMS and other chat softwares on the message
9
10
interface. The maximum storage number of messages is eight. When
exceed eight, previous messages will be replaced one by one. You will not
receive messages when you disconnect the bracelet from the APP.
Note: Slide the screen to the right on time interface to quickly enter
message function.
8. Sleep
Sleep monitoring period by default: 21: 00 p.m. -- 09: 00 a.m. The bracelet
generates data. After exit sleep monitoring in the bracelet, click on the
upper left corner of sleep interface in the APP to synchronize the sleep data
from the bracelet to the APP.
9. Health (Heart rate & Blood pressure & Blood oxygen monitoring)
Put the bracelet on the wrist (left/right hand) correctly. Click on the health
icon to enter heart rate/blood pressure/blood oxygen menu. Enter the
heart rate interface and the heart rate value will be continuously measured.
The test time is about 30s. Or you can set up real-time dynamic heart rate
monitoring in the APP: More -- Heart rate monitoring -- Time period
(recommended: 08:00 -- 22:00) /Frequency (recommended interval: 1H).
After saving, the bracelet will automatically monitor and save the data in
11
12
the APP.
When on heart rate/blood pressure/blood oxygen interface, slide to the left
or click on the folder in the upper right corner to view the historical data of
the test.
Note：
1). When the dynamic heart rate monitoring is turned on, the battery life of
the bracelet will decrease.
2). When detecting the heart rate, please keep your body still or sit still.
Otherwise, the heart rate measurement time will be prolonged or the data
will not be measured. After finish the data measuring, you can move and
view the real-time dynamic heart rate data. If the measurement data vary
greatly, please take a break and re-measure. The average value of the data
obtained by continuously measuring 5 times will be more accurate.
3). This product is a real-time dynamic heart rate measurement, so the
heart rate will be different when talking, eating, drinking, etc. Please refer
to the actual situation.
4). The data of blood pressure and blood oxygen measurement are for
reference only and cannot be used as a basis for medical related aspects.
10. Alarm
After the bracelet is bound to the Fundo APP, the alarm clock set in the APP
can be synchronized to the bracelet, and up to five alarm clocks can be set.
Clicking on the Alarm icon can stop the vibration alert.
11. Camera
After the bracelet is bound to the Fundo APP, open APP, click on the camera
function of the bracelet and the camera of the phone will be ready. Then
click on camera, and the cell phone will take a photo.
12. Music
13
14
After the bracelet is bound to the Fundo APP, turn on music player on your
phone. When playing music, you can control to play/pause music and
change songs via the bracelet.
13. Running
Open the app, click the Fundo icon
to enter sports interface, and select
running mode: Walking/Outdoor Running
/Indoor Running/Mountaineering/Trail
Running /Half Marathon/Full Marathon
Mode. After selecting mode, click Start and
turn on the GPS of phone. Start running.
14. Sports (Walking, Running, Cycling, Climbing, Football, Basketball,
Table Tennis, Badminton)
Select the corresponding sport mode and click the screen to enter the
reciprocal 3, 2 and 1 to directly enter the corresponding sport mode. Click
on the top right corner to pause the sport record, and click on the top left
corner to stop the sport record and save the data.
Note: When the distance is more than 200 meters or the movement time is
longer than 5 minutes, the movement data can be saved. If this condition is
not met, it will prompt "too little data to save" at the end of motion saving.
15
16
Vielen Dank für den Kauf dieses Produkts. Bitte lesen Sie diese
Bedienungsanleitung vor der Verwendung sorgfältig durch und bewahren
Sie diese zum späteren Nachschlagen auf. Wenn Sie Probleme mit diesem
Produkt haben, können Sie uns gerne unter hommiehk@hotmail.com
kontaktieren.
Empfehlungen zum Tragen von Watch
1. Bitte tragen Sie das Armband am Handgelenk, ca. 2cm von der ulna
entfernt. Der Herzfrequenzsensor befindet sich nahe an der Haut und kann
nicht geschüttelt werden. Es wird nicht empfohlen, zu eng zu tragen. Dies
beeinflusst den Blutfluss und dann die Genauigkeit der
Herzfrequenzmessung.
2. Bitte vergewissern Sie sich, dass während der Messung kein Schmutz auf
der Unterseite des Herzfrequenzsensors liegt. Hautfarbe, Haardichte,
Tätowierungen und Narben können die Genauigkeit der Testergebnisse
beeinflussen. Bitte nochmal messen.
Armband Host Schematische Darstellung
Ein-/Ausschalten
Einschalten: Drücken Sie die Seitentaste 5 Sekunden lang, oder schließen
Sie das Ladegerät an, um es aufzuladen.
Vollbildschirm
berühren
Ein-/Ausschalter
/ Zurück
Herzfrequenz
sensor
Ladekontakt
17
18
Table des matières
Langues :
Autres manuels Hommie Montre
