Holatek A3 Manuel utilisateur

HOLATEK –A3

User Manual

3D LED Smart Projector & TV

Contents

SAFETY INSTRUCTIONS.................................................................................................4

THE SAFETY SIGNS ...........................................................................................................4

NOTICE FOR USE...............................................................................................................4

BATTERY INSTRUCTION..................................................................................................10

OPERATION INSTRUCTIONS .......................................................................................11

THE LIGHT SOURCE .................................................................................................11

OTHER INSTRUSTIONS.............................................................................................12

SUMMARY.........................................................................................................................14

PACKING LIST ...............................................................................................................14

SYSTEM UPGRADE..........................................................................................................15

THE LOCATION AND FUNCTION OF CONTROL........................................................16

EXTERNAL VIEW...........................................................................................................16

CONTROLAREA ............................................................................................................17

REAR VIEW...................................................................................................................18

BOTTOM VIEW................................................................................................................19

FUNCTION OF REMOTE CONTROL....................................................................................20

PROJECTED IMAGES.....................................................................................................22

INSTALLATION OF THE PROJECTOR................................................................................22

METHODS OF PROJECTION ............................................................................................24

BASIC OPERATIONS ......................................................................................................27

TURN ON AND TURN OFF THE PROJECTOR......................................................................27

OPTION OF INFORMATION LANGUAGE...........................................................................29

OPTION OF INPUT SOURCE.............................................................................................29

KEYSTONE CORRECTION...............................................................................................29

USEAGE OF 3D FUNCTION.............................................................................................30

USAGE OF SETTING OPTIONS .......................................................................................31

MAINTENANCE..............................................................................................................33

THE UNIT OF LIGHT SOURCE..........................................................................................33

INDICATOR .....................................................................................................................34

TROUBLESHOTTING.......................................................................................................34

SPECIFICATIONS..............................................................................................................35

Safety Instructions

Thank you for purchasing the HOLATEK Projector. You need to read carefully

the “safety instructions” before using it.After reading the User Manual, please keep it

for future reference.

The safety signs

To ensure the safety of you and others and keep the items from damages, the

User Manual applies a variety of signs whose meanings are as follows:

Notice for use

Caution

●Smoking, peculiar smell, hot temperature and other abnormal situations

Please immediately stop using the machine (continuing using it will

lead to dangers of causing fire and electric shock) if there is smoke,

smell or any other abnormal situations, and please take the following

measures:

1. Turn off the power of the machine;

Danger

This sign indicates that ignoring the sign and wrong operations

will lead to death or serious injury.

Caution

This sign indicates that ignoring the sign and wrong operations

will lead to the potential dangers of injury.

Attention

This sign indicates that ignoring the sign and wrong operations

will lead to potential dangers of death or serious injury.

2. Unplug the power plug of the machine;

3. Contact your dealer or the HOLATEK authorized service center.

●Fault

Please immediately stop using the machine (continuing using it will

lead to dangers of causing fire and electric shock) if the picture display

is abnormal or has any other abnormal phenomenon under correct

operations, and please take the following measures:

1. Turn off the power of the machine;

2. Unplug the power plug of the machine;

3. Contact your dealer or the HOLATEK authorized service center.

●Power cord

Improper use of power cord may lead to dangers of causing fire and

electric shock, the user must observe the following precautions:

The output voltage must be equal to ratedAC voltage of the machines;

A plethora of devices can not be inserted into the power socket to avoid

overload

The impaired power cord will lead to dangers of causing fire and electric

shock, the user must observe the following precautions:

Do not place heavy objects on the power cord or heat the power cord;

Do not place the power cord between the wall and the table where the

machine is placed;

Do not cover the power cord with cushion or other items;

Do not try to transform the power cord as it will be damaged or excessively

bended;

Do not twist or pull the power cord

Do not touch the power cord or the plug with wet hands or there will be

danger of electric shock

When using this machine in the in the country where it is purchased, please

use the attached power cord; when using this machine in other countries,

you must purchase and use a power cord which meets the national power

supply requirements and pay attention to the safety standards of that

country.

●Water and foreign matters

Do not place vase or any container filled with water or other liquid on the

machine or splash water or other liquid on the machine, otherwise it will

lead to dangers of causing fire and electric shock

Machine with foreign matters (such as metal, etc )will lead to dangers of

causing fire and electric shock, the user must immediately take the

following operations:

1. Turn off the power of the machine;

2. Unplug the power plug of the machine;

3. Contact your dealer or the HOLATEK authorized service center.

●Dismantling and reconstruction

Do not dismantle or reconstruct the machine in any way as the machine

contains a lot of high-voltage components which may lead to dangers of

electric shock and burn. Please note that problems caused by the

disassembly or reconstruction of the machine are beyond the scope of the

warranty, and HOLATEK will not provide free maintenance. All internal

inspections, debugging and maintenance must be entrusted to your dealer or

the HOLATEK authorized service center.

●Drop and impact

Continuous use may lead to dangers of causing fire and electric shock if the

machine is damaged due to drop or other reasons. In this case, please

immediately take the following measures:

1. Turn off the power of the machine;

2. Unplug the power plug of the machine;

3. Contact your dealer or the HOLATEK authorized service center.

●Incineration

Do not discard the machine by incineration, or it will lead to dangers of

explosion, fire and personal injury.

●Look straight into lens or vents when the light source unit is lit

Do not look straight into lens or vents when the light source unit is lit as the

glare from the bare engine may harm your eyes

●Shielding the vent

Do not shield the air inlet or outlet, otherwise it will lead to internal heat

accumulation, which may lead to dangers of causing fire and burning up the

machine. Touching the hot machine may be burned, users must strictly

observe the following precautions:

The space between wall and the machine must be larger than 30 cm;

Do not place the machine in an environment of poor air circulation;

Do not cover the machine with blankets or any similar articles;

Always place the machine on a stable and horizontal surface during the

operation; do not place the machine on carpets, blankets, towels, cushions or

other soft surface during the operation;

Do not erect the machine during the operation

●Lightning

Do not touch the power plug of the machine when thunderstorm and

lightning occur

●Remote control

Do not dismantle or reconstruct the remote control in any way as it may

lead to dangers of electric shock, burn and other personal injury. All internal

inspections, debugging and maintenance must be entrusted to your dealer or

the HOLATEK authorized service center

Do not wet the remote control. Keep it from water or other liquids as it may

lead to dangers of causing fire and electric shock

●The radio waves emitted by the wireless module

Do not operate the machine on a plane, within medical facilities or in

any other places which such a device is prohibited. The radio waves

will influence electronic devices and medical equipments, resulting in

accidents

Do not operate the machine near electronic instrument of high precision

or electronic devices which are poor in dealing with weak radio signals

as the radio waves will have an impact on such devices, resulting in

accidents

If you are using a cardiac pacemaker or any other electronic medical

devices, please consult doctors or the manufacturers of such devices before

operating the product.

Attention

●Power cord

Improper use of power cord may result in dangers of causing fire and

electronic shock, users must strictly observe the following precautions:

Dot not place the power cord by the fire;

Seize the plug when you unplug the power cord and never pull it;

Plug fully in the socket;

Please unplug the power cord from the socket after the operation of the

machine;

Please unplug the power cord from the socket if the machine will not be used

for an extended period of time;

Unplug the plug from the socket at least once per year and clean the plug

tube feet with dry cloth or vacuum cleaner;

Do not clean the power cord especially the power plug and socket with

cleanser;

Turn off the power and unplug the power cord from socket before moving the

machine.

●Backup of important data

Keep a backup of all data in the machine memory to avoid the loss of data

due to failure, maintenance and other reasons

●Refraction effect

There shall be no fishbowl or other items which may produce refraction

effect in front of the machine when the light source unit is lit as it may lead

to dangers of causing fire

●Lens

Do not touch the lens with hands

●Clean

The dirty machine inner with accumulated dusts may result in dangers

of causing fire and breakdowns;

Please contact the dealer or the HOLATEK authorized service center

once per year to have the machine’s internal cleaned. Note that, such

cleaning services are not free

Battery Instruction

Caution

Improper use of batteries may cause leakage of battery liquid, polluting the

surrounding components or resulting in explosion, thereby leading to

dangers of causing fire and personal injury, users must strictly observe the

following precautions:

Never attempt to disassemble the battery or have it short-circuited;

Never place the batteries in a high-temperature environment or into fire;

Do not charge non-rechargeable batteries;

Make sure the batteries are in the correct direction when inserting them;

Batteries specified by remote control only

●Depleted batteries

Depleted batteries must be removed from the remote control as soon as

possible;

Remove the batteries if the remote control will not be used for an

extended period of time

●Batteries disposal

Dispose the used batteries according the local laws and regulations

Operation Instructions

The light source

Light source unit of the machine applies LED

The designed life of the light source unit is about 20,000 hours. The actual life

depends on the operation condition, the set on setting menu and different light

source units;

The warranty period of the light source unit is the term recorded in the Warranty

or 6,000 hours, the shorter term prevails;

If light source unit is not bright or become obviously dark, it indicates that the

said light source has reached its life span. Please contact your dealer or the

HOLATEK authorized service center for replacement

Table des matières

Autres manuels Holatek Projecteur

Holatek

Holatek A2 Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur