Hocom EQC Series Manuel utilisateur

EQC-Counting Scale

User Manual

EQC

Series

Price Computing Scale

Digital Counting Scale

EQC-Counting Scale

User Manual

Cautions

Upon receiving the scale, please take at least 8

hours to recharge the battery before you start to

operate this scale.

Please recharge the battery after a long period of

storage (more than one month). It takes 8~10

hours to fully recharge the battery.

Please assemble the platter before powering on the

scale.

Do not keep the weight placed on the platter for a

long period.

Keep the scale away from the environment with

high temperature、high humidity、heavy press、

heavy bump.

Always make sure the scale is located in a flat and

plane surface.

EQC-Counting Scale

User Manual

Dimensions

EQC:

EQC-Counting Scale

User Manual

Symbols on LCD

Zero Indication ():

Cursor appears on the bottom edge of WEIGHT

LCD (above of ZERO printed on the display-overlay),

and indicates the scale is at zero-point.

NET Weight Indication ():

Cursor appears on the bottom edge of WEIGHT

LCD (above of NET printed on the display-overlay),

and indicates the tare weight has been deducted.

Indication of kg、g Weighing Mode () :

Cursor flashes on the bottom edge of WEIGHT

LCD (above of kg or gprinted on the display-overlay),

and indicates the present weighing mode.

Insufficient Sampling-Quantity Indication () :

Cursor appears on the bottom edge of UNIT

WEIGHT LCD (above of S.Q printed on the

display-overlay), and indicates the sampling-quantity

(setup via [SAMPLE] key) is less than 10 pieces. The

greater the sampling-quantity on the platter, the more

precise the unit weight calculation.

EQC-Counting Scale

User Manual

Insufficient Unit Weight Indication () :

Cursor appears on the bottom edge of UNIT

WEIGHT LCD (above of S.W printed on the

display-overlay), and indicates the averaging unit

weight is too light.

The internal resolution of this scale is 60000. If the

averaging weight per unit is less than “max capacity

/ 60000”, cursor will flash on UNIT WEIGHT LCD.

For example:

With 30kg max capacity and an internal resolution of

60000, 30kg / 60000 = 0.5g. If the average unit

weight of measured subjects is lighter than 0.5g, 

cursor will flash on UNIT WEIGHT LCD (above of S.W

printed on the display-overlay).

Indication of Weighing Range () :

Cursor appears on the bottom edge of UNIT

PRICE LCD (above of W1 or W2 printed on the

display-overlay), and indicates the present weighing

range to be Weighing Range 1 (W1) or Weighing

Range 2 (W2).

Notice:The indication of weighing range is

only available for scales with multiple range (2

ranges).

EQC-Counting Scale

User Manual

Battery Symbol ( ) :

When WEIGHT LCD indicates and the scale

sounds beep for four times, it means the battery is

running in low-voltage status. WEIGHT LCD will

indicate continuously for reminding the user to

recharge the battery. If the battery is still running in

low-voltage status without being recharged, WEIGHT

LCD will indicate -OFF- and the scale will sound

beep for eight time. Please power off the scale and

recharge the battery right away.

-

EQC-Counting Scale

User Manual

OPERATION INSTRUCTIONS



(1) Press these keys to key in the unit price.

(2) Press and hold [0] key till WEIGHT LCD display

shows the voltage of battery. 6.1 ~ 6.5 means the

battery is running in hi-voltage status. Less than

5.5 means the battery is running in low-voltage

status. Please recharge the battery as soon as

possible. Pressing [C] key could go back to

normal operating-mode.

:

(1) Press this key to set the decimal point for the unit

weight.

(2) Press and hold [] key till the scale sounds beep to

enable or disable optional Backlight.



Press this key to delete the setting values of unit

weight.



ZERO

Press this key to make the scale be at zero-point.

WEIGHT LCD will indicate cursor on the above of

ZERO (printed on the display-overlay).

EQC-Counting Scale

User Manual



TARE

Press this key could get the net weight. Place a

package or container on the platter and press this key

to deduct the tare weight, WEIGHT LCD will show

0.000 and indicate cursors on the above of ZERO

and NET (printed on the display-overlay).



SAMPLE

Press this key to confirm the sampling quantity.

Example:

Put 500pcs of screws on the platter; then key in 500;

then press [SAMPLE] key once, the scale will

calculate the averaging unit weight of 500 screws

and show the value on UNIT WEIGHT LCD.

While putting another more pieces (less than 500pcs)

of screws on the platter, the scale will re-calculate the

averaging unit weight (UNIT WEIGHT LCD will clear

the original value and then show the updated value).

Please do NOT remove any thing from the platter till

the updated value of averaging unit weight has been

displayed.

EQC-Counting Scale

User Manual



Press this key is to set the value of unit weight. We

suggest the unit weight should be heavier than the

division (or sensitivity) of the scale. For a counting

scale 6/15kg x 2/5g, the unit weight should not be

lighter than 2g.

Example:

With the known unit weight at 10g, please key in 10;

then press [WS] once; then 10g will be indicated on

UNIT WEIGHT LCD.



ALARM

1. Quantity Alarm:

<1> Press [ALARM] key to select -PCS- (showed

on UNIT WEIGHT LCD.

<2> Key in 100 (showed on WEIGHT LCD; then

press [ALARM] key again to confirm the

setting.

Notice:The setting values under -Hi-mode

and -Lo- mode must be 0.

When the total quantity of measured subjects is

≧

100, the scale will sound beep continuously.

2. Hi/Lo Weight Limit:

Example: setup Hi/Lo weight range at 10kg ±500g.

EQC-Counting Scale

User Manual

<1> Press [ALARM] key to select -Lo- (showed

on UNIT WEIGHT LCD); then key in 9.500

(showed on WEIGHT LCD; then press

[ALARM] key again to confirm the setting.

<2> Press [ALARM] key to select -HI- (showed on

UNIT WEIGHT LCD); then key in 10.500

(showed on WEIGHT LCD; then press [ALARM]

key again to confirm the setting.

Notice:The setting value under PCS mode must

be 0.

The scale will sound beep continuously while:

9.500

≦

the total-weight value

≦

10.500

3. Over-Weight Alarm:

Example: setup 10kg as the over-weight limit.

Press [ALARM] key to select -Lo- (showed on UNIT

WEIGHT LCD); then key in 10.000 (showed on

WEIGHT LCD; then press [ALARM] key again to

confirm the setting.

Notice:The setting values under PCS mode and

-HI- mode must be 0.

The scale will sound beep continuously when the

measured weight is

≧

10.000kg.

Table des matières

Autres manuels Hocom Échelle

Hocom

Hocom FW Series Manuel utilisateur

Hocom

Hocom SDW Series Manuel utilisateur

Hocom

Hocom SSW Series Manuel utilisateur

Hocom

Hocom SSPX Manuel utilisateur

Hocom

Hocom GRP Series Manuel utilisateur

Hocom

Hocom GRW Series Manuel utilisateur

Hocom

Hocom AEPL-M Series Manuel utilisateur

Hocom

Hocom GRC Series Manuel utilisateur

Hocom

Hocom TAP Series Manuel utilisateur

Hocom

Hocom JDC Series Manuel utilisateur

Hocom

Hocom EQW Series Manuel utilisateur

Hocom

Hocom BCS Series Manuel utilisateur

Manuels Échelle populaires d'autres marques

AWS

AWS ZEO-50 Manuel utilisateur

Gima

Gima Glass Body Fat Analyzer Manuel de la liste des pièces

Seca

Seca 374 Manuel utilisateur

TEC

TEC TEC SL59 SERIES Manuel utilisateur

Axis

Axis B/E Series Manuel utilisateur

Alecto

Alecto ACW-40 Manuel utilisateur

Rice Lake

Rice Lake MSI-4260 IS Manuel utilisateur

IKA

IKA RCT basic safety control Manuel utilisateur

ADE

ADE M20011 Manuel utilisateur

Duronic

Duronic KS3000 Manuel utilisateur

Digi

Digi SM-720 Manuel utilisateur

Cardinal

Cardinal CS Series Manuel utilisateur

Korona

Korona Kastella Manuel utilisateur

A&D

A&D FC-50Ki Manuel utilisateur

BDA

BDA CAMARGUE Manuel utilisateur

Tanita

Tanita HD-357 Manuel utilisateur

Leifheit

Leifheit 03173 Manuel utilisateur

Lumme

Lumme LU-1340 Manuel utilisateur