HNK RAX1501 Manuel utilisateur
R
MANUAL
1.ᡆተሮφ215*145mmθޢᐤf1mm.
2.ᶆ䍞φ105g䬒⡾㓮
3.দ㾷≸φ㢨দ
4.㻻䇘㾷≸φ 僇傢䪿θ㠩ቇњ䪿θ24p
5.ᶆᯏ༺⨼ᐛ㢰ൽ㜳┗䏩ROHS2.0θHFWEEEⲺ㾷≸.
DATE:
2022-04-07
1:1
N/A
/
/
A0 DRAW
CHECK
APPD1/1
PART NO.:MODEL:
SHEET
SCALE
FINISH
UNITĆS
MATĆL
mm VER:
TITLE:
CUSTOMER:
൩ᐸ䗾㞴⭫ᆆᴿ䲆ޢ
SHENZHEN MTN ELECTRONICS CO.,LTD
зឝ᱄
䛢ᒩ
HNK
MTO-WR1500AX
User manual
ሷ䶘
Wireless Router — HNK RAX1501
ᶗ⸷ṲᕅѰCODE128θᇯѰᇂ᮪ᯏθተሮ㓜35*5mm
ᒬ൞сᯯᱴ⽰ᇂ᮪ᯏθᆍ։Arial 6pt
ᯏфሯᓊבᓊ㾷ж㠪
17.P6.XXXXXXXXX
User manual
Wireless Router — HNK RAX1501
17.P6.XXXXXXXXX
Figure 1-1
Figure 1-2
1.Appearance
Reset
LAN Ports
WAN Port
WPS Button/WiFI Button
Power LED WPS LED
5G LED
2.4G LED
DC in
Internet LED
LAN LED
2.Packing List
HNK wifi router h 1
Power adapter h 1
Ethernet cable h 1
Quick Installation Guide h 1
User manual h 1
Figure 3-1
='4
Modem
Internet
or
3.Connect the Router
1. Before you start, please turn off your modem if any, and remove the backup battery
if it has one.
2. Connect the modem to the routerĆs WAN port with an Ethernet cable.
3. Turn on the modem, and then wait about 2 minutes for it to restart.
4. Connect the power adapter to the router.
5. Verify the power LED on the top panel is solid on (green) .
6. Connect your computer or smartphone to the wifi named HNK-RAX1500 or
HNK-RAX1500-5Ghz.
Note: If your internet connection is through an Ethernet cable directly from the wall
instead of through a DSL / Cable /Satellite modem, connect the Ethernet cable to the
router's WAN port, and then connect the power adapter to the router and turn on the router.
4.Wizard Page
4.1 Wizard Page
Browser Type 192.168.0.1 , automatically jump to the configuration wizard pageδNO
password in defaultε
Figure 4-1
Figure 4-2
4.2 WAN Connection Settings
There are several connection types to choose: Static IP, DHCP and PPPoE. If you are
unsure of your connection method, please contact your Internet Service Provider.
Note: If using the PPPoE option, you will need to remove or disable any PPPoE client
software on your computers.
4.2.1 DHCP Settings
4.2.2 PPPoE Settings
Figure 4-3
Figure 4-4
4.4 Admin Password Settings
After configuring the wifi, click ćNextĈ to set the user (Admin) password, and then
click ćNextĈ to save the configuration.
4.2.3 Static IP Settings
Figure 4-5
Figure 4-6
4.3 Wireless SSID and Password Settings
After configuring the static IP access method, please click ćNextĈ to complete the
wireless SSID configuration and wireless password settings.
Figure 4-7
Figure 4-8
Figure 4-9
5.Web Management Landing Page
5.1 Management Page Login
After completing the configuration wizard, please enter 192.168.0.1 in the browser to
log in to the router management page.
Admin PasswordφThe Device admin Password you set on Wizard Page.
Figure 5-1
6.Home Page
Home page information is displayed.
Figure 6-0
6.1 Internet Information Display Page
Internet connection status and connection information.
Figure 6-1
6.2 WiFi Information Display Page
6.2.1 Router Mode
Home>>RAX1500
Display Extender IPv4 mac address and wireless SSID.
Figure 6-2
6.2.2 Repeater Mode
Display the Extender IPv4 mac address and the uplink routerĆs wireless SSID.
Figure 6-3
6.3 Connected Clients Information Display Page
Connected Clients information display page: It shows Connected Clients information.
Figure 6-4
Click on Settings >> Wireless. Turn off the status button of Smart Connect. Then you can configure
the router 2.4G or 5G WIFI SSID and password.Click on Settings >> Wireless. Turn off the status button
of Smart Connect. Then you can configure the router 2.4G or 5G WIFI SSID and password.
7.Function Configuration
7.1 WIFI Setting
Use this section to configure the wireless settings for your Router. Please note that
settings made in this section may also need to be synchronized on your Wireless Client.
Figure 7-1
7.1.1 WIFI 2.4G Setting and 5G Setting
Configure the router 2.4G or 5G WIFI SSID and password.
Figure 7-2
Complete 2.4G advanced configuration, such as channel, security mode, 802.11
mode.
Figure 7-3
Complete 5G advanced configuration, such as channel, security mode, 802.11
mode.
Figure 7-4
7.1.2 Smart Connect
After the smart connection is closed, the extender 2.4G WIFI and the 5G WIFI can
be searched on the terminal wireless device respectively, and there are two wireless bands
to be displayed on the page.
Figure 7-5
When Smart Connect feature is on, your wireless device can find one wireless SSID,
and it will automatically match the 2.4G or 5G band WIFI according to the connection
signal strength.
Figure 7-6
7.1.3 Guest Zone
This feature lets you enable and configure a Wi-Fi Guest Zone. It allows you to create
a separate network for your guests to secure the main network.
Figure 7-7
7.2 Internet Function Configuration
Use this section to configure your Internet Connection type. There are several connec-
tion types to choose: Static IP, DHCP and PPPoE. If you are unsure of your connection
method, please contact your Internet Service Provider.
Note: If using the PPPoE option, you will need to remove or disable any PPPoE client
software on your computers.
Figure 7-8
Table des matières
Manuels Routeur réseau populaires d'autres marques
NETGEAR
NETGEAR FS526T - Switch Manuel utilisateur
Korenix
Korenix JetNet 5710G Series Manuel utilisateur
Automated Logic
Automated Logic ZN551 Manuel du propriétaire
Cisco
Cisco ASR 1000 Series Manuel de l'opérateur
EnGenius
EnGenius ESR-9710 Manuel utilisateur
Cisco
Cisco 805 Series Instructions d'utilisation et de sécurité