ADJUSTMENT AND USAGE
A
B
Indicator
Light
Up
Stop
Down
bottom limited position
up limited position
Learning
button
Charging port
Fabric Position
A. Up Limited Position
When the fabric in the stage of drawing back and
the bottom weight bar is not in the right place,
please insert the adjusting stick into "A" hole:
I. Upward adjusting for weight bar position: Rotate
adjusting stick on "1" direction , then operate
screen up and down by handset until the screen
is in the right place.
II. Downward adjusting for weight bar position:
Rotate adjusting stick on "2" direction , then
operate screen up and down by handset until the
screen is in the right place.
B. Bottom Limited Position
When the fabric completely open up, while the
top black border is not in right place, please
insert the adjusting stick into "B" hole:
I. Increase the top black border(downward
adjusting for weight bar):Rotate adjusting stick
on "4" direction, then operate screen up and
down by remote control until the top black border
is in the right place.
5
Remote Handset
A. Code Learning:
I. Pressing the LEARNING button at the end cap
of screen for 3-5sec to make screen up and
down once.
II. Press the UP button of for 3-5
sec to make screen up and down again. Code
learning is complete.
B. Code :
Pressing the LEARNING button for 7sec to
make screen up and down twice.
Release the button and original code erased.
Remote Handset
Erasion
C. Charging Status:
Green Light: Low battery
Red Light: Charging
Light off: Charged completely
II.Decrease the top black border(upward adjusting
for weight bar):Rotate adjusting stick on "3"
direction, then operate screen up and down by
remote control until the top black border is in the
right place.
