Hive Active Heating Manuel utilisateur

How to use your

Hive Thermostat

A warm welcome to Hive

It’s time to enjoy clever heating and hot water control with your Hive thermostat.

Hot tip: If you’ve bought Hive Active Heating™ for help controlling your

heating and hot water remotely, visit hivehome.com

What can my Hive thermostat do?

Heating Page 4

•Turn your heating temperature up or down using the dial

•Set up a schedule for your heating

•Boost your heating

Hot water Page 8

If you’ve got a separate hot water tank, you can control

your hot water too.

•Turn your hot water on or o

•Set up a schedule for your hot water

•Boost your hot water

Other features Page 12

Troubleshooting Page 13

Hive Multizone Page 19

Heating

Boost

Hot Water

Boost

Dial

Screen

Back

Confirm

Heating

How to change mode:

Your thermostat has 3 different heating modes: Schedule, Manual and Off

1Push the dial to wake up the thermostat.

2Once the screen turns on press the Menu button and select Heat.

3Here you’ll see the different modes: Schedule, Manual andOff.

4Select one by turning and pushing the dial.

Schedule turns your heating on and off when you want it to and can

be more energy efficient.

Manual makes sure your home maintains a constant temperature.

Off leaves your heating in Frost Protection – so your heating will only

come on if your home drops below 7°C. You’ll see on the screen

to remind you that Frost Protection is enabled.

Getting started

How to change the temperature:

1Turn the dial clockwise toincrease the target temperature.

2Your heating will come on if the target temperature is above

the actual temperature.

3Turn the dial anti-clockwise to lower the target temperature.

16˚20˚

MON 19:25

TARGET ACTUAL

MANUAL

How to view your heating schedule:

1Push the dial to wake up the thermostat.

2Once the screen turns on press the Menu button.

3Turn the dial to select Heat, then push the dial.

4Choose Schedule then select View/Edit Current.

5Turn the dial left or right to browse through the days and to select a day.

6You’ll now see the schedule for the day you selected.

18º18º 18º

Press tick to confirm, or press dial to edit.

HEAT SCHEDULE: MON

06:0008:15 11:0 012:00 16:00 21:30

Hot tip: To edit the schedule for that day just push the dial.

Heating

Setting up a heating schedule:

Your thermostat will walk you through setting up your heating

schedule step by step.

To do this:

1Wake up your thermostat by pushing the dial and then

pressthe Menu button.

2Turn the dial to select Heat and push the dial to confirm.

3Select Schedule and push the dial to confirm.

4Scroll to Start Over and push the dial to confirm.

5Follow the on-screen instructions to create your newschedule.

How to boost your heating for a short time:

1Press the Heating Boost button on top of the

thermostat to turn the heating on for one hour.

2Press the Heating Boost button again

to increase the length of your boost.

3Turn the dial to change

the boost temperature

(it’s set to 22°C by default).

4When the boost finishes,

your heating will go back

to its previous mode.

5To cancel boost early,

press the Back button.

Hot water

Hot water features are not shown on combi boilers (without a separate hot

water tank) as they automatically heat water when it’s needed.

Hot tip: If you only want hot water at certain times of day, using Schedule

mode could be more energy ecient.

18˚

MON 19:25

MANUAL

ACTUAL

How to turn your

hot water on or off:

1Wake up your thermostat by

pushing the dial.

2Once the screen turns on

press the Menu button.

3Turn the dial to select

Hot Water, then push the dial.

4Choose either Always On

or Always Off.

5Press the Confirm button.

Setting up a new hot water schedule:

Your thermostat will walk you through setting up your hot water schedule

step by step.

To do this:

1Wake up your thermostat by pushing the dial and

press the Menu button.

2Turn the dial to select Hot Water and push the dial toconfirm.

3Select Schedule and push the dial to confirm.

4Scroll to Start Over and push the dial to confirm.

5Follow the on screen instructions to create your newschedule.

How to view your hot water schedule:

1Push the dial to wake up the thermostat.

2Once the screen turns on press the Menu button.

3Turn the dial to select Hot Water, then push the dial.

4Choose Schedule then select View/Edit Current.

5Turn the dial left or right to browse through the days and to select a day.

6You’ll now see the schedule for the day you selected.

Hot tip: To edit the schedule for that day push the dial to start editing.

On On OnOffOf

ff Off

Press tick to confirm, or press dial to edit.

HOT WATER SCHEDULE: MON

06:0008:15 11:0 012:00 16:00 21:30

109

How to boost your hot water for a short time:

1Press the Hot Water Boost button on top of the thermostat

to turn the hot water on for one hour.

2Press the Hot Water Boost button again

to increase thelength of your boost.

3When your boost finishes, your

system will go back to your

previous mode.

4To cancel your boost early,

press the Back button.

More things you can do

with your thermostat

•Select Holiday mode and set the dates you’ll be away by going to Menu

then Holiday.

•Set a Child Lock so little hands can’t change the temperature, ﬁnd it under

Menu then Settings.

•Increase the temperature of your Frost Protection setting. By default this

is set so your home won’t drop below 7°C and will activate whatever mode

your heating is in. Find it under Menu then Settings.

1211

Troubleshooting

A red battery symbol means your batteries need to be replaced

with four new AA batteries.

How to change the batteries:

1Press the tab on the base of your thermostat.

2Lift your thermostat off the hooks that hold it against the wall

(and turn it over to access the batteries).

3Simply pop the batteries out and put the new ones in.

4Re-hook the top of your thermostat and then press the bottom

until it clicks to secure it to the wall.

22˚

MON 19:25

No signal

22˚

MON 19:25

NO SIGNAL

If this message shows on your thermostat –

it means your thermostat and receiver aren’t

communicating.

For more information visit

hivehome.com/help or get in touch with the

Hive team at help@hivehome.com

Hot tip: When there is no signal the ‘Status’ button on the receiver will

be red. You can manually switch your heating and hot water on and o.

To do this press the central heating and hot water buttons on the

receiver (usually ﬁtted beside your boiler).

No signal

Press tab to open

1413

Icons you might see

on your thermostat

1. Current day and time MON 19:25

2. Hot water mode

3. Heating mode

4. Heating on ON

5. Actual temperature ACTUAL

6. Conﬁrm button

7. Menu button

8. Back button

9. Target temperature TARGET

10. Frost Protection

11. Boost time remaining 3:17:12

MANUAL

16˚

MON 19:25

TARGET ACTUAL

3:17:12 ON

2 3

678

1615

Customise your thermostat cover

Different coloured frames are available for your Hive thermostat,

discover more at hivehome.com

To change your thermostat frame:

1Press the tab on the base of your thermostat.

2Lift your thermostat off the hooks.

3Hold your thermostat in one hand with the dial in your palm.

4With your other hand, squeeze together the two tabs shown on the

back of your thermostat.

5Slide the frame off the back of your thermostat.

6Your new frame will slide on from the back of your thermostat and

click into place.

Tabs

1817

Autres manuels pour Active Heating

Table des matières

Autres manuels Hive Thermostat