Slibgnij*t Hs223 uHF Duarwireress Microphone Mixerwith Btuetooth connection User's Manual
Schematic Diagram Chapter 2.
O Handheld Wireless Microphone Battery Underuoltage LED Indicator
O Handheld Wireless Microphone Power and Mute Function Slide Switch
g Handheld Wireless Microphone Battery Compartment Cap
@ HandheldWireless Microphone Channel color identification head.
G@
BIue head means this wireless microphone can be used in channel A.
Orange head means this wireless microphone can be used in channel B.
Method of Application
1. Connect the Power Adapter
First plug the power adapter into the AC outlet, then connect the power cable with the powerjack in the rear panel of
the smart mixer, then press the power switch in the front panel, the power LED indicator will be on to indicate that the
smart mixer has entered the working status.
At the same time, the built-in Bluetooth will begin to work. The Bluetooth device is identified as "Hisonic".
2. Turn On the Handheld UHF Wireless Microphones
Twist and remove the cap ofthe battery compartment ofthe handhelg_UHF wireless microphone. Install the AA batteries
according to the following instructions, each wireless microphone uses two AA batteries as the power supply, separate
the two AA batteries into the battery compartment, the negative side of the battery is placed on one side of the spri ng,
the positive electrode ofthe battery is put into the side without a spring.
Then twist the battery compartmet cap, and slide up the power switch to ON position to turn on the UHF wireless
microphone, after a short wait time, the smart mixer will automatically connect to the wireless microphone. And the
LED indicator Iight will turn blue in the front panel.
+ Use the Bluetooth Function
Open the mobile device's Bluetooth menu to search for the smart mixer Bluetooth identification mark is "Hisonic".
and click it to connect the system with your device.
When the smart mixer's power is turned on, the Bluetooth function of this smart mixer will always be on.
You can use the audio applications ofr the mobile devices to play the music on other equipments, such as media
speaker, HDTV, amplifier, personal computer, etc...
This smart mixer uses Bluetooth version 4.2.
4. Use the AUDIO SOUND Volume Control
This AUDlO SOUND volume control allows continuous adjustment of the music output level.
By adjusting the AUDIo SOUND knob, you can control the output volume ofthe audio source, Bluetooth input, Line-in
input, HDMI input.
Then you can connect the audio output to the amplifier or an active loudspeaker. With this, you mix the microphone
sound and music together and they are output to an active speaker or an amplifier where it goes to a speaker.
5. Control the Microphone Volume of the A or B
There are two knobs that control microphone volume, Volume A knob controls the sound level of the wireless micro-
phone A and wired microphone, Volume B knob controls the sound level of the wireless microphone B and wired
microphone B.
