Hilltip Ice STRIKER 600 TR Manuel utilisateur
STRIKER
TM
Owner’s manual
600-1000 LITER POLY ELECTRIC TRACTOR SPREADER
19 November, 2021
Version 1.2
This manual replaces all editions with an earlier date.
2
IceStrikerTM
GENERAL INFORMATION ............................................ 3
Spreader parts .................................................. 3
Technical information ............................................. 4
SAFETY INFORMATION.............................................. 5
Safetydenitions ................................................ 5
Safety precautions ............................................... 5
Recommended vehicle requirements ................................. 6
Noise ......................................................... 6
Personal safety.................................................. 6
Emergency stop ................................................. 6
Warning and caution labels ........................................ 7
INSTALLATION AND OPERATION ..................................... 8
Control placement ............................................... 8
Vehicle side harness cable kit ...................................... 8
Accessory cables ................................................ 9
Mounting the top screen ........................................... 9
Mounting the Tarp cover assembly...................................10
Spreading pattern ................................................12
Rotate jammed auger manually .....................................12
LOADING ..........................................................13
Average material weights ..........................................13
Filling the integrated pre-wet tank ...................................13
MAINTENANCE .....................................................14
Maintaining the spreader ..........................................14
Storage ........................................................15
OPTIONAL LIQUID SYSTEMS.........................................16
Pre-wet (optional) ................................................16
Spray-bar (optional) ..............................................17
Bladder tank (optional) ............................................18
Hose reel (optional) ..............................................19
Liquid system clean-out instructions..................................19
ELECTRICAL SCHEMATIC ...................................... . . . . . 20
WARRANTY INFORMATION ..................................... . . . . . 21
CERTIFICATE OF CONFORMITY ................................. . . . . . 22
Read this manual before installing or
operating the spreader
CAUTION
!
3
IceStrikerTM
GENERAL INFORMATION
Spreader parts
Tarp cover
License plate kit and
rear light (optional)
Beacon light (optional)
Emergency stop button
Spinner
Auger
(inside hopper)
4
IceStrikerTM
Technical information
SPREADER SPECIFICATIONS 600 TR 800 TR 1000 TR
Overall width 1500 mm 1500 mm 1500 mm
Height 1500 mm 1650 mm 1800 mm
Capacity (water level) 550 l 750 l 950 l
Capacity (rounded) 630 l 850 l 1050 l
Weight (empty) 320 kg 360 kg 390 kg
Hopper construction Poly Poly Poly
Spreading width 1-8 m (may vary depending on material)
Spinner size 390 mm 390 mm 390 mm
Auger diameter 65 mm 65 mm 65 mm
Vibrator YES YES YES
GPS speed control YES YES YES
Vehicle Tractors/loaders
Material Salt, sand, granulat, mixed
OPTIONAL LIQUID SYSTEM 600 TR 800 TR 1000 TR
Pre-wet, Spray volume 3-12 l/min 3-12 l/min 3-12 l/min
Spraybar, Spray volume 5-25 l/min 5-25 l/min 5-25 l/min
Pre-wet, Spraying width 1-8 m (together with spreading material)
Spraybar, Spraying width 2-5 m 2-5 m 2-5 m
Pre-wet, liquid tank capacity 330 l 330 l 330 l
Spraybar, liquid tank capacity 330/900 l * 330/900 l * 330/900 l *
Spraying material Anti- and de-icing liquids, water, liquid fertilizers **
5
IceStrikerTM
Technical information
Implies a potentially hazardous
situation that, if not avoided, could
result in death or serious personal
injury.
Implies a potentially hazardous
situation that, if not avoided, may
result in minor or moderate injury.
It may also be used to alert against
unsafe practices.
Implies a situation or action that can
lead to damage to your spreader and
vehicle or other property. Other useful
information can also be described.
Safety denitions
1. Read this manual before operating the
spreader.
2. Before operating, make sure all the
equipment is securely mounted into place.
3. Check that there are no persons within the
spreader spray area when starting and
operating this spreader.
4. Do not exceed your vehicle total weight
beyond payload limits.
5. Alwaysturnothespreader before
cleaning, lubricating or unclogging
material jambs.
6. Never climb or ride on or in the spreader.
7. Ensure that you have fastened the
spreader to the vehicle according to
descriptions in this manual.
8. A spreader in need of repairs or
maintenance should not be operated.
9. Before removing or replacing any
electrical components, always disconnect
the battery.
10.Donotkeepgasolineorotherammable
liquids on the truck bed while spreader is
mounted on the truck bed.
Observe these safety precautions
before, during and after operating the
spreader. You can prevent injury to
persons and damage to the spreader
by following these precautions.
SAFETY INFORMATION
Safety precautions
Incorrect installation and operation can lead
to serious personal injury and/or damage
your equipment and property. Note and
ensure that you understand this manual and
all the labels before installing, operating or
making adjustments to the spreader.
!WARNING
iNOTE
!WARNING CAUTION
!
6
IceStrikerTM
Always keep bystanders a minimum
of 10 meters away when operating the
spreader.
Empty and clean the hopper after each
use. Unused spreading material left in
hopper could freeze or solidify, causing
the spreader to not work properly.
Use a good quality multi-purpose
greasetolubricategreasettingsafter
each use.
• To prevent accidents, secure long hair and do not wear jewelry or necktie, only wear tight-tting
clothes while working on your spreader or vehicle.
• Protect your eyes with safety goggles to avoid damage from battery acid, gasoline, dirt and dust.
• Always handle the solid and liquid materials carefully. Wear safety goggles, mouth mask, gloves
and protecting clothes to protect yourself from spattering material.
Wait for auger and spinner to stop and
lock out power before servicing the
spreader.
Personal safety
!WARNING !WARNING
iNOTE
CAUTION
!
The spreader has an emergency stop button located at the right side of the chute. All spreader
functions will immediately stop by pushing this button.
Emergency stop
Recommended vehicle requirements
This spreader is suitable for tractors and loaders with a minimum lift capacity of 2000 kg.
Noise
The noise caused by the running spreader does not exceed 70 dB
7
IceStrikerTM
Warning and caution labels
Please become familiar with warning and caution labels on the spreader.
- Visible when removing the spinner
assembly
Warning - Rotating auger! Keep
hands clear. Wrench might slip when
working with auger
Warning - Keep away from spinner
and spreader in motion. Stay clear
of turning spinner. Moving parts can
crush and cut
Warning - Handling of abrasive
and chemical material can cause
injury
- Located on the chute
8
IceStrikerTM
1
2
1
2
3
INSTALLATION AND OPERATION
The controller should be mounted in a place
where it can easily be reached and doesn’t
interfere with the access to vehicle controls
or other equipment. Make sure that the
spreader control panel doesn’t block any
vehicle airbag areas. Protect the controller
from water, dirt and dust.
Control placement
Vehicle side harness cable kit
Vehicle side harness cable kit 1. Power connector to spreader
2. Data connector to spreader
To vehicle battery 1. 80A fuse
2. Black (-)
3. Red (+)
In-cabin connector
9
IceStrikerTM
Red = Emergency stop (standard)
Black = Water pump
Yellow = Beacon light
Blue = Camera power feed
White = LED worklight
Accessory cables
Mounting the top screen
Placethescreensothatittsthehopperopening.
Fasten the brackets on both sides of the screen,
theatbracketshouldbeinthemiddle.
10
IceStrikerTM
Mounting the Tarp cover assembly
Insert one of the longer pipes into the
opening in the cover (pre-mounted)
1Insert brackets in both sides.
2
Connect pipe and brackets with bolts in
both ends.
3Place the second long pipe under the
cover and connect to the brackets using
bolts
4
Ce manuel convient aux modèles suivants
2
Table des matières
Manuels Épandeur populaires d'autres marques
Fisher
Fisher POLY-CASTER 78601 Manuel utilisateur
TurfEx
TurfEx RS7200 Manuel du propriétaire
Ferris
Ferris Pathfinder Series Manuel utilisateur
Fayat Group
Fayat Group DYNAPAC S100 Guide de dépannage
Art's-Way Manufacturing
Art's-Way Manufacturing X700 Manuel d'installation et d'exploitation
EASTMAN
EASTMAN CR 500 Manuel utilisateur
