HIK VISION HiLook Series Manuel utilisateur

HiLook Series

3K ColorVu

Audio Bullet Camera

User Manual

Thank you for purchasing our product. If there are any

questions, or requests, do not hesitate to contact the

dealer.

This manual applies to the models below:

Type

Model

Type I

THC-B159-MS

Type II

THC-B259-MS

This manual may contain several technical mistakes or

printing errors, and the content is subject to change

without notice. The updates will be added to the new

version of this manual. We will readily improve or

update the products or procedures described in the

manual.

01010020210510

Legal Information

About this Manual

Pictures, charts, images and all other information

hereinafter are for description and explanation only.

The information contained in the Manual is subject to

change, without notice, due to firmware updates or

other reasons. Please find the latest version in the

company website (https://www.hikvision.com/). Please

use this user manual under the guidance of

professionals.

Trademarks

and other Hikvision's trademarks and logos are

the properties of Hikvision in various jurisdictions.

Other trademarks and logos mentioned are the

properties of their respective owners.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE

LAW, THIS MANUAL AND THE PRODUCT DESCRIBED,

WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE

PROVIDED "AS IS" AND "WITH ALL FAULTS AND

ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS

OR IMPLIED, INCLUDING WITHOUT LIMITATION,

MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS

FOR A PARTICULAR PURPOSE. THE USE OF THE

PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT

WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL,

CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,

INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF

BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS

OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF

DOCUMENTATION, WHETHER BASED ON BREACH OF

CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT

LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE

USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR

LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF THE

INTERNET PROVIDES FOR INHERENT SECURITY RISKS,

AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES

FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR

OTHER DAMAGES RESULTING FROM CYBER-ATTACK,

HACKER ATTACK, VIRUS INFECTION, OR OTHER

INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL

PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE

WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY

RESPONSIBLE FOR ENSURING THAT YOUR USE

CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU

ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A

MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF

THIRD PARTIES, INCLUDING WITHOUT LIMITATION,

RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS,

OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.

YOU SHALL NOT USE THIS PRODUCT FOR ANY

PROHIBITED END-USES, INCLUDING THE DEVELOPMENT

OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION,

THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR

BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE

CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR

UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF

HUMAN RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS

MANUAL AND THE APPLICABLE LAW, THE LATER

PREVAILS.

Regulatory Information

FCC Information

Please take attention that changes or modification not

expressly approved by the party responsible for

compliance could void the user’s authority to operate

the equipment.

FCC compliance: This equipment has been tested and

found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection

against harmful interference when the equipment is

operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to

radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in

which case the user will be required to correct the

interference at his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received,

including interference that may cause undesired

operation.

EU Conformity Statement

This product and - if applicable - the

supplied accessories too are marked with

"CE" and comply therefore with the

applicable harmonized European

standards listed under the Low Voltage Directive

2014/35/EU, the EMC Directive 2014/30/EU.

2012/19/EU (WEEE directive): Products

marked with this symbol cannot be

disposed of as unsorted municipal waste in

the European Union. For proper recycling,

return this product to your local supplier

upon the purchase of equivalent new equipment, or

dispose of it at designated collection points. For more

information see: www.recyclethis.info.

2006/66/EC (battery directive): This

product contains a battery that cannot be

disposed of as unsorted municipal waste in

the European Union. See the product

documentation for specific battery

information. The battery is marked with

this symbol, which may include lettering to indicate

cadmium (Cd), lead (Pb), or mercury (Hg). For proper

recycling, return the battery to your supplier or to a

designated collection point. For more information see:

www.recyclethis.info.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A)

standards requirements.

Warning

This is a class A product. In a domestic environment this

product may cause radio interference in which case the

user may be required to take adequate measures.

Safety Instruction

These instructions are intended to ensure that user can

use the product correctly to avoid danger or property

loss.

The precaution measure is divided into “Warnings” and

“Cautions”.

Warnings: Serious injury or death may occur if any of

the warnings are neglected.

Cautions: Injury or equipment damage may occur if any

of the cautions are neglected.

Warnings

In the use of the device, you must be in strict

compliance with the electrical safety regulations of

the nation and region.

Input voltage should meet both the SELV (Safety Extra

Low Voltage) and the Limited Power Source with 12

VDC according to the IEC60950-1 standard and

IEC62368-1 standard. Refer to technical specifications

for detailed information.

The socket-outlet shall be installed near the

equipment and shall be easily accessible.

An all-pole mains switch shall be incorporated in the

electrical installation of the building.

Do not connect multiple devices to one power

adapter to avoid over-heating or a fire hazard caused

by overload.

Make sure that the plug is firmly connected to the

power socket.

Make sure that the device is firmly fixed if wall

mounting or ceiling mounting is adopted.

If smoke, odor or noise rise from the device, turn off

the power at once and unplug the power cord, and

then contact the service center.

Never attempt to disassemble the camera by

unprofessional personal.

Cautions

No naked flame sources, such as lighted candles,

should be placed on the equipment.

Install the equipment according to the instructions in

this manual.

To prevent injury, this equipment must be securely

attached to the wall in accordance with the

installation instructions.

Do not drop the camera or subject it to physical

shock.

Do not touch senor modules with fingers.

Do not place the camera in extremely hot, cold (the

operating temperature shall be -40°C to 60°C), dusty

Warnings Follow

these safeguards to

prevent serious

injury or death.

Cautions Follow these

precautions to prevent

potential injury or

material damage.

or damp locations, and do not expose it to high

electromagnetic radiation.

If cleaning is necessary, use clean cloth with a bit of

ethanol and wipe it gently.

Do not aim the camera at the sun or extra bright

places.

The sensor may be burned out by a laser beam, so

when any laser equipment is in using, make sure that

the surface of sensor will not be exposed to the laser

beam.

Do not expose the device to high electromagnetic

radiation or extremely hot, cold, dusty or damp

environment.

To avoid heat accumulation, good ventilation is

required for the operating environment.

Keep the camera away from liquid while in use for

non-water-proof device.

While in delivery, the camera shall be packed in its

original packing, or packing of the same texture.

The beam of the light at the distance of 200 mm is

classified as Risk Group 1 (RG1). Possible hazardous

optical radiation emitted from this product.

DO NOT stare at operating light source. May be

harmful to the eyes.

Wear appropriate eye protection or turn on the

supplement light only at a safe distance (0.3 m) or in

the area that is not directly exposed to the light when

installing or maintaining the device.

1Introduction

1.1 Product Features

The main features are as follows:

High performance CMOS sensor

Smart light

4 in 1 video output

Audio over coaxial cable

1.2 Overview

1.2.1 Overview of Type I Camera

DC12VIN Power Cord

Audio & Video Cable

Switch Button

Bracket

Main Body

Lens

Figure 1-1 Overview of Type I Camera

Note:

Press and hold the switch button for 5 seconds to

switch the video output. Four kinds of video outputs

are available: TVI, AHD, CVI, and CVBS.

1.2.2 Overview of Type II Camera

Power Cord

Audio & Video Cable

Switch Button

Bracket

Lens Main Body

Figure 1-2 Overview of Type II Camera

Note:

Press and hold the switch button for 5 seconds to

switch the video output. Four kinds of video outputs

are available: TVI, AHD, CVI, and CVBS.

2Installation

Before you start

Make sure that the device in the package is in good

condition and all the assembly parts are included.

Make sure that all the related equipment is power-off

during the installation.

Check the specification of the products for the

installation environment.

Check whether the power supply is matched with

your power output to avoid damage.

Make sure the wall is strong enough to withstand

three times the weight of the camera and the mount.

If the product does not function properly, contact

your dealer or the nearest service center. Do NOT

disassemble the camera for repair or maintenance by

yourself.

2.1 Installation of Type I Camera

2.1.1 Ceiling/Wall Mounting without Junction Box

Before you start:

The ceiling mounting and wall mounting are similar.

Following steps take ceiling mounting as an example.

Steps:

1. Paste the drill template (supplied) to the place

where you want to install the camera.

2. (Optional) For cement ceiling, drill the screw holes

with a 5.5 mm drill and insert the supplied wall

plugs.

Cable

Hole

Side Opening

Screw Hole Screw Hole

Screw Hole

template

Figure 2-1 Drill Template

3. (Optional) Drill the cable hole, when the cables are

routed through the ceiling.

4. Align the screw holes in the bracket to the ceiling,

and secure the camera with three PA4 × 25 screws

(supplied).

Figure 2-2 Secure the Camera to the Ceiling

5. Connect the cables.

6. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure

below.

Screw B

Screw A

Trim Ring

Rotation Position

[0°to 360°] Tilt Posi tion

[0°to 180°]

Pan Position

[0°to 360°]

Figure 2-3 3-Axis Adjustment

1). Loosen the trim ring to adjust the pan position

[0° to 360°].

2). Loosen screw A to adjust the tilt position [0° to

180°].

3). Loosen screw B to adjust the rotation position [0°

to 360°].

7. Tighten the trim ring and screws to finish the

installation.

2.1.2 Ceiling/Wall Mounting with Junction Box

Before you start:

You need to purchase a junction box in advance.

Ceiling mounting and wall mounting are similar.

Following steps take wall mounting as an example.

Steps:

1. Paste the drill template for junction box to the place

where you want to install the camera.

2. (Optional) For cement wall, drill the screw holes

with a 5.5 mm drill and insert the supplied wall

plugs.

Figure 2-4 Drill Template for Junction Box

3. (Optional) Drill the cable hole, when the cables are

routed through the wall.

4. Take apart the junction box.

5. Align the screw holes of the camera with those on

the junction box cover. Attach the camera to the

junction box cover with three PM4 × 10 screws.

Figure 2-5 Attach the Camera to the Junction Box Cover

6. Secure the junction box body on the wall with three

PA4 × 25 screws (supplied).

Figure 2-6 Secure the Junction Box on the Wall

7. Route the cables through the bottom cable hole or

side cable hole of the junction box and connect the

cables.

8. Fix the junction box cover on its body with three

PM3 × 16 L6 screws that come with the junction

box.

Figure 2-7 Fix the Junction Box Cover on Its

Body

9. Repeat steps 6 to 7 of 2.1.1 Ceiling/Wall Mounting

without Junction Box to finish the installation.

2.2 Installation of Type II Camera

2.2.1 Ceiling/Wall Mounting without Junction Box

Before you start:

The ceiling mounting and wall mounting are similar.

Following steps take ceiling mounting as an example.

Steps:

1. Paste the drill template (supplied) to the place

where you want to install the camera.

2. (Optional) For cement ceiling, drill the screw holes

with a 5.5 mm drill and insert the supplied wall

plugs.

Cable

Hole

Side Opening

Screw Hole Screw Hole

Screw Hole

template

Figure 2-8 Drill Template

3. (Optional) Drill the cable hole, when the cables are

routed through the ceiling.

4. Align the screw holes in the bracket to the ceiling,

and secure the camera with three PA4 × 25 screws

(supplied).

Figure 2-9 Secure the Camera to the Ceiling

5. Connect the cables.

6. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure

below.

Trim Ring

Screw A

Screw B

Pan Position [0°to 360°]

Rotation Position

[0°to 360°]

Tilt Posi tion [0°to 180°]

Figure 2-10 3-Axis Adjustment

1). Loosen the trim ring to adjust the pan position

[0° to 360°].

2). Loosen screw A to adjust the tilt position [0° to

180°].

3). Loosen screw B to adjust the rotation position [0°

to 360°].

7. Tighten the trim ring and screws to finish the

installation.

2.2.2 Ceiling/Wall Mounting with Junction Box

Installation of type II camera with junction box is similar

with that of type I camera. Refer to 2.1.2 Ceiling/Wall

Mounting with Junction Box for details.

3Menu Description

Please follow the steps below to call the menu.

Note:

The actual display may vary with your camera model.

Steps:

1. Connect the camera with the TVI DVR and the

monitor, as shown in figure 3-1.

Camera

TVI DVR

Monitor

Figure 3-1 Connection

2. Power on the camera, TVI DVR, and monitor to view

the image on the monitor.

3. Click PTZ Control to enter the PTZ Control interface.

4. Call the camera menu by clicking button or

calling preset No. 95.

EXPOSURE

EXPOSURE MODE

MAIN MENU

VIDEO

SETTINGS

EXIT

SAVE & EXIT

AGC

BACK

EXIT

CONTRAST

SHARPNESS

SATURATION

DNR

BACK

VIDEO

FORMAT

FACTORY

DEFAULT

SAVE & EXIT

WHITE BALANCE

BRIGHTNESS

EXIT

SAVE & EXIT

IMAGE MODE

ANTI- BANDING

SMART

LIGHT

BACK

EXIT

SAVE & EXIT

THRESHOLD

LEVEL

AUDIO

SETTINGS BACK

EXIT

SAVE & EXIT

VOLUME

AUDIO

Figure 3-2 Main Menu Overview

5. Click the direction buttons to control the camera.

1). Click up/down direction buttons to select menu

options.

2). Click Iris + to confirm the selection.

3). Click left/right direction buttons to adjust the

value of the selected option.

3.1 VIDEO FORMAT

Video format are available as follows:

When switching the video output as TVI, you can

set the video format as 3K@20 fps, 4M@25

fps,4M@30 fps, 2M@25 fps, or 2M@30 fps.

When switching the video output as CVBS, you can

set the video format as PAL, or NTSC.

When switching the video output as AHD, you can

set the video format as 4M@25 fps, or 4M@30

fps.

Autres manuels pour HiLook Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HIK VISION Caméra de sécurité

HIK VISION

HIK VISION DeepinView DS-2XM6425G0/F Series Manuel utilisateur

HIK VISION

HIK VISION DS-2TD2167-7/PI Manuel utilisateur

HIK VISION

HIK VISION DS-2CE16D8T-IT1 Manuel utilisateur

HIK VISION

HIK VISION DS-2CD8253F-EI(S) Manuel utilisateur

HIK VISION

HIK VISION DS-2CD51C5G0-IZS Manuel utilisateur

HIK VISION

HIK VISION iDS-TCM403-B/0832 Manuel utilisateur

HIK VISION

HIK VISION ColorVu DS-2CE72DFT-FC Manuel utilisateur

HIK VISION

HIK VISION DS-2TD4668-35A4/W Manuel utilisateur

HIK VISION

HIK VISION TURBO HD DS-2CE16H1T-IT1E Manuel utilisateur

HIK VISION

HIK VISION DS-2CE16D8T-AIT3ZE Manuel utilisateur

HIK VISION

HIK VISION EPI-4225I-DE Manuel utilisateur

HIK VISION

HIK VISION DS-2XE62 2F-IS Series Manuel utilisateur

HIK VISION

HIK VISION DS-2CE16H0T-ITF Manuel utilisateur

HIK VISION

HIK VISION TurboHD DS-2CE38D8T-PIR Manuel utilisateur

HIK VISION

HIK VISION IR Network Speed Dome Manuel utilisateur

HIK VISION

HIK VISION TURBO HD TVI DS-2CE16D0T-IT1E Manuel utilisateur

HIK VISION

HIK VISION DS-2AE7230T Manuel utilisateur

HIK VISION

HIK VISION TurboHD DS-2CE56D7T-IT Z Series Manuel utilisateur

HIK VISION

HIK VISION DS-2CD2423G0-I Manuel utilisateur

HIK VISION

HIK VISION DS-2CE16D0T-VFIR3E Manuel utilisateur

HIK VISION

HIK VISION DS-2CD7026G0-EP-I-H Manuel utilisateur

HIK VISION

HIK VISION NETWORK CAMERA Manuel utilisateur

HIK VISION

HIK VISION DS-2CD63C5G0-IVS Manuel utilisateur

HIK VISION

HIK VISION D8T Series Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur