HIK VISION DS-2CE17H0T-IT3F Manuel utilisateur
DS-2CE17H0T-IT3F
Bullet Camera
User Manual
UM DS-2CE17H0T-IT3F 052220NA 2
Thank you for purcha ing our product. If there are
any que tion or reque t , do not he itate to
contact the dealer.
Thi manual applie to the following model:
Model
DS
-
2CE17H0T
-
IT
3
F
Thi manual may contain technical mi take or
printing error , and the content i ubject to
change without notice. Update will be added to
new ver ion of thi manual. We will readily improve
or update the product or procedure de cribed in
the manual.
Regulatory Information
FCC Information
Plea e take attention that change or modification
not expre ly approved by the party re pon ible for
compliance could void the u er’ authority to
operate the equipment.
FCC Compliance: Thi equipment ha been te ted
and found to comply with the limit for a Cla A
digital device, pur uant to part 15 of the FCC Rule .
The e limit are de igned to provide rea onable
protection again t harmful interference when the
equipment i operated in a commercial
environment. Thi equipment generate , u e , and
can radiate radio frequency energy and, if not
in talled and u ed in accordance with the
in truction manual, may cau e harmful interference
to radio communication . Operation of thi
equipment in a re idential area i likely to cau e
harmful interference, in which ca e the u er will be
required to correct the interference at hi own
expen e.
FCC Conditions
Thi device complie with part 15 of the FCC Rule .
Operation i ubject to the following condition :
Thi device may not cau e harmful interference.
Thi device mu t accept any interference
received, including interference that may cau e
unde ired operation.
EU Conformity Statement
Thi product and, if applicable, the upplied
acce orie too are marked with “CE” and
comply therefore with the applicable
harmonized European tandard li ted under
the Low Voltage Directive 2014/35/EU, the
EMC Directive 2014/30/EU.
UM DS-2CE17H0T-IT3F 052220NA 3
2012 19 EU (WEEE Directive): Product marked
with thi ymbol cannot be di po ed of a
un orted municipal wa te in the European
Union. For proper recycling, return thi product
to your local upplier upon the purcha e of
equivalent new equipment, or di po e of it at
de ignated collection point . For more
information ee: www.recyclethi .info.
2006 66 EC (Battery Directive): Thi product
contain a battery that cannot be di po ed
of a un orted municipal wa te in the
European Union. See the product
documentation for pecific battery
information. The battery i marked with thi
ymbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury
(Hg). For proper recycling, return the battery
to your upplier or to a de ignated collection
point. For more information, ee:
www.recyclethi .info.
Industry Canada ICES-003 Compliance
Thi device meet the CAN ICES-3 (A)/NMB-3(A)
tandard requirement .
Warning
Thi i a cla A product. In a dome tic environment
thi product may cau e radio interference, in which
ca e the u er may be required to take adequate
mea ure .
Safety Instruction
The e in truction are intended to en ure that the
u er can u e the product correctly to avoid danger
or property lo .
The precaution mea ure i divided into “Warning ”
and “Caution .”
Warnings: Seriou injury or death may occur if any
of the warning are neglected.
Cautions: Injury or equipment damage may occur if
any of the caution are neglected.
Warnings
Follow the e
afeguard to prevent
eriou injury or death.
Cautions
Follow the e
precaution to prevent
potential injury or
material damage.
UM DS-2CE17H0T-IT3F 052220NA 4
Warnings
In the u e of the device, you mu t be in trict
compliance with the electrical afety regulation
of the nation and region.
Input voltage hould meet both the SELV (Safety
Extra Low Voltage) and the Limited Power Source
with 12 VDC according to the IEC60950-1
tandard and IEC62368-1 tandard. Refer to
technical pecification for detailed information.
Do not connect multiple device to one power
adapter to avoid overheating or a fire hazard
cau ed by overload.
Make ure that the plug i firmly connected to
the power ocket.
Make ure that the device i firmly fixed if wall
mounting or ceiling mounting i adopted.
If moke, odor, or noi e ri e from the device, turn
off the power at once, unplug the power cord,
and then contact the ervice center.
Unprofe ional per onnel hould never attempt
to di a emble the camera.
Cautions
Do not drop camera or ubject it to phy ical
hock.
Do not touch en or module with finger .
Do not place the camera in extremely hot, cold
(the operating temperature hall be -40° to 60°
C), du ty, or damp location , and do not expo e it
to high electromagnetic radiation.
If cleaning i nece ary, u e a clean cloth with a
bit of ethanol, and wipe it gently.
Do not aim the camera at the un or extra bright
place .
The en or may be burned out by a la er beam,
o if any la er equipment i in u e, make ure
that the urface of the en or will not be
expo ed to the la er beam.
To avoid heat accumulation, good ventilation i
required for the operating environment.
Keep the camera away from liquid while in u e for
non-waterproof device.
While in delivery, pack the camera in it original
packing or packing of the ame material.
UM DS-2CE17H0T-IT3F 052220NA 5
Contents
1 Introduction ........................................................ 6
1.1 Product Feature ....................................................... 6
1.2 Overview ...................................................................... 6
2 Installation ......................................................... 6
2.1 Ceiling/Wall Mounting without Junction Box ......... 7
2.2 Ceiling/Wall Mounting with Junction Box ............... 8
3 Menu Description ................................................ 9
3.1 Video Format ............................................................. 11
3.2 Expo ure .................................................................... 11
3.3 DAY/NIGHT ................................................................. 12
3.4 VIDEO SETTINGS ......................................................... 14
UM DS-2CE17H0T-IT3F 052220NA 6
1Introduction
Product Features
The main feature are a follow :
High Performance CMOS Sen or
OSD Menu with Configurable Parameter
Smart IR
3-Axi Adju tment
Overview
Figure 1, Camera Overview
NOTE: Pre and hold the witch button for five
econd to witch the video output. Four
kind of video output are available: TVI,
AHD, CVI, and CVBS.
2Installation
Before You Start
Make ure that the device in the package i in
good condition and all the a embly part are
included.
Make ure that all the related equipment i
powered off during the in tallation.
Check the pecification of the product for the
in tallation environment.
Check whether the power upply i matched with
your power output to avoid the damage.
Make ure the wall i trong enough to with tand
three time the weight of the camera and the
mount.
If the product doe not function properly,
contact your dealer or the neare t ervice
center. Do NOT di a emble the camera for repair
or maintenance your elf.
S
w
i
t
c
h
B
u
tt
o
n
Power Cord
Video Cable
Bracket
Main Body
UM DS-2CE17H0T-IT3F 052220NA 7
Ceiling Wall Mounting without Junction Box
Before You Start
Ceiling mounting and wall mounting are imilar. The
following tep u e ceiling mounting a an
example.
1. (Optional) For a concrete ceiling, drill the
crew hole with a 5.5 mm drill, and in ert the
upplied wall plug .
2. (Optional) Drill the cable hole if the cable are
routed through the ceiling.
3. Align the crew hole in the bracket to the
ceiling, and ecure the camera with three PA4
× 25 crew ( upplied).
Figure 2, Secure the Camera on the Ceiling
4. Connect the power cord and video cable.
5. Power on the camera to check if the image on
the monitor i at an optimum angle. If not,
adju t the camera according to the figure
below.
Figure 3, 3-Axi Adju tment
1) Loo en the trim ring to adju t the pan
po ition [0° to 360°].
2) Loo en crew A to adju t the tilt po ition
[0° to 180°].
3) Loo en crew B to adju t the rotation
po ition [0° to 360°].
6. Turn the trim ring clockwi e and tighten
crew A and B to fini h in tallation.
Rotation Position
[0° to 360°] ilt Position
[0° to 180°]
P
a
n
P
o
s
iti
o
n
[0° to 360°]
rim Ring
Screw A
Screw B
UM DS-2CE17H0T-IT3F 052220NA 8
Ceiling Wall Mounting with Junction Box
Before You Start
You need to purcha e a junction box in advance.
Ceiling mounting and wall mounting are imilar. The
following tep take wall mounting a an example.
1. Pa te the junction box drill template where
you want to in tall the camera.
2. (Optional) For a concrete wall, drill the crew
hole with a 5.5 mm drill, and in ert the
upplied wall plug .
Figure 4, Junction Box Drill Template
3. (Optional) Drill the cable hole if the cable are
routed through the wall.
4. Di a emble the junction box.
5. Align the crew hole of the camera with
tho e on the junction box cover. Attach the
camera to the junction box cover with three
PM4 × 10 crew .
Figure 5, Attach Camera to Junction Box Cover
6. Secure the junction box body onto the wall
with three PA4 × 25 crew ( upplied).
UM DS-2CE17H0T-IT3F 052220NA 9
Figure 6, Secure Junction Box to the Wall
7. Route the cable through the bottom cable
hole or ide cable hole of the junction box and
connect the cable .
8. Affix the junction box cover to it body with
three PM3 × 16 L6 crew that come with the
junction box.
Figure 7, Affix Junction Box Cover to it Body
9. Repeat tep 5 to 6 of 2.1 Ceiling/Wall
Mounting without Junction Box to fini h the
in tallation.
3Menu Description
Plea e follow the tep below to call the menu.
NOTE: The actual di play may vary by camera
model.
1. Connect the camera to the TVI DVR and the
monitor a hown below.
UM DS-2CE17H0T-IT3F 052220NA 10
Figure 8, Connection
2. Power on the analog camera, TVI DVR, and the
monitor to view the image on the monitor.
3. Click PTZ Control to enter the PTZ Control
interface.
4. Call the camera menu by clicking the
button or calling pre et No. 95.
Figure 9, Main Menu Overview
5. Click the direction arrow to control the
camera.
1) Click up/down direction button to elect
the item.
2) Click Iris+ to confirm the election.
3) Click left/right direction button to adju t
the value of the elected item.
Table des matières
Autres manuels HIK VISION Caméra de sécurité
HIK VISION
HIK VISION DS-2CC5173N-VP IR Manuel utilisateur
HIK VISION
HIK VISION DS-2CC11A2P-IR Manuel utilisateur
HIK VISION
HIK VISION DS-2CD2443G0-I Manuel utilisateur
HIK VISION
HIK VISION UD04395B Manuel utilisateur
HIK VISION
HIK VISION DSR-5310 Manuel utilisateur
HIK VISION
HIK VISION DS-2CE10DFT-FC Manuel utilisateur
HIK VISION
HIK VISION DS-2CE11D0T-PIRL Manuel utilisateur
HIK VISION
HIK VISION DS-2CC51A5PN-VF Manuel utilisateur
HIK VISION
HIK VISION 5 Inch Network High Speed Dome Manuel utilisateur
HIK VISION
HIK VISION DS-2CD7A26G0/P-IZHSWG Manuel utilisateur
HIK VISION
HIK VISION DS-2CD2955FWD-I Manuel utilisateur
HIK VISION
HIK VISION EZVIZ Mini Pano Manuel utilisateur
HIK VISION
HIK VISION 23 Series Manuel utilisateur
HIK VISION
HIK VISION DS-2TD2637T-7/P Manuel utilisateur
HIK VISION
HIK VISION TURBO HD DS-2CE16H1T-IT1E Manuel utilisateur
HIK VISION
HIK VISION DS-2CD2345G0P-I Manuel utilisateur
HIK VISION
HIK VISION D8T Series Manuel utilisateur
HIK VISION
HIK VISION DS-2CE10HFT-F28 Manuel utilisateur
HIK VISION
HIK VISION DS-2CD6365G0E-IVS Manuel utilisateur
HIK VISION
HIK VISION DS-2CE78U7T-IT1F Manuel utilisateur
