HID PivCLASS R10-H Manuel utilisateur

INSTALLATION GUIDE

hidglobal.com An ASSA ABLOY Group brand

GOVERNMENT SOLUTIONS for Physical Access

R10-H, RP10-H, R40-H, RP40-H, RK40-H,

RPK40-H, RKCL40-P, RPKCL40-P, RKCLB40-P

pivCLASS® Reader

Parts

1 - Reader and base plate assembly

1 - Installation guide

2 - Terminal connector - terminal readers only

RKCL40, RPKCL40 & RKCLB40

4 - M3.5 mm x 12 mm Phillips machine screw

4 - #6-32 x .375” Phillips self-tapping machine screw

4 - #6 x 1.5” Phillips sheet metal screw

3 - #6-32 x .4375” Spanner security screw, anti-tamper (black)

3 - #6-32 x .4375 Phillips security screw (black)

1 - Mounting gasket

Recommended

• Cable, 6 conductor, 22 or 24 AWG [65 mm or 51 mm] Twisted Pair, Over-All Shield (Belden 3108A or equivalent) - RS-485-FDX +

power

• Cable, 4 conductor, 22 or 24 AWG [65 mm or 51 mm] Twisted Pair, Over-All Shield and UL approved (Belden 3107A, or equivalent) -

RS-485-HDX + power

• Cable, 6 to 9 conductor, 22 or 24 AWG [65 mm or 51 mm] Over-All Shield, (Alpha 1296C or equivalent) - Wiegand + power

• DC power supply

• Metal or plastic double-gang junction box - RPKCL40 / RPKCL40 / RKCLB40

• Metal or plastic single-gang junction box - R10 / RP10 / R40 / RP40 / RK40 / RPK40

• Reader spacer when using metal junction boxes - see pivCLASS How to Order Guide

• Security tool (for spanner security screw, anti-tamper) HID 04-0001-03

Speciﬁcations

pivCLASS Protocol

PRODUCT BASE PART

NUMBER

INPUT VOLTAGE

(VDC)

CURRENT OPERATING

TEMPERATURE CABLE LENGTH UL REF

NUMBER

Standby

AVG1

Maximum

AVG2PEAK3

R10-H 900NHR

12VDC

60mA 100mA

200mA

-30° to 150° F

(-35° to 65° C) RS-485 = 500 ft - 22 AWG

(152 m)

300 ft - 24 AWG

(91 m)

R10Ex1x2x3

RP10-H 900PHR 75mA RP10Ex1x2x3

R40-H 920NHR 65mA 110mA R40Ex1x2x3

RP40-H 920PHR 85mA RP40Ex1x2x3

RK40-H 921NHR 85mA 125mA 220mA RK40Ex1x2x3

RPK40-H 921PHR 95mA RPK40Ex1x2x3

RKCL40-P 923NPR 150mA 185mA 250mA -4° to 122° F

(-20° to 50° C)

RKCL40Ex1x2x3

RPKCL40-P 923PPR RPKCL40Ex1x2x3

RKCLB40-P 924NPR 165mA 215mA 275mA 14° to 122° F

(-10° to 50° C) RKCLB40Ex1x2x3

R10, RP10, R40, RK40, RP40 & RPK40

2 - M3.5 mm x 12 mm Phillips machine screw

3 - #6-32 x .375” Phillips self-tapping machine screw

2 - #6 x 1.5” Phillips sheet metal screw

1 - #6-32 x .375” Spanner security screw, anti-tamper

1 - Mounting gasket (optional, recommended for outdoor

installation)

1 StandbyAVG-RMScurrentdrawwithoutacardintheRFeld.

2MaximumAVG-RMScurrentdrawduringcontinuousPIVcardreads.NotevaluatedbyUL.

3 Peak-highestinstantaneouscurrentdrawduringRFcommunication.

UL Reference Number Deciphering

x1Reader Colors: K = Black

x2 Wiring: N = Pigtail, T = Terminal

x3 Communications: N = No Module, R = RS-485

PLT-01134 A.8

INSTALLATION GUIDE

hidglobal.com An ASSA ABLOY Group brand

trademarks of HID Global, ASSA ABLOY AB, or its aliate(s) in the U.S. and other countries and may not be used without permission. All other trademarks, service marks, and

product or service names are trademarks or registered trademarks of their respective owners.

This Installation Guide is for informational purposes only. HID makes no warranties, expressed or implied, in this summary. Company, product names and data used in sample output

are ﬁctitious. Speciﬁcations are subject to change without notice.

pivCLASS R10-H, RP10-H, R40-H, RP40-H, RK40-H, RPK40-H, RKCL40-P,

RPKCL40-P, RKCLB40-P

Wiegand and OSDP Protocol

Installation

1 Mounting

Attach Backplate and Mounting Gasket to Junction Box.

Contactless Models Contact Models

1 CommunicationprotocolsotherthanWiegand

orClock&Datarequireanadditionalhardware

modulewhichincreasescurrentby30mA.

PRODUCT BASE PART

NUMBER

INPUT VOLTAGE

(VDC)

CURRENT1

OPERATING

TEMPERATURE CABLE LENGTH5UL REF

NUMBER

Standby

AVG2

Maximum

AVG3PEAK4

R10-H 900N

5-16VDC

12VDC for RS-485

60mA

100mA

200mA

-30° to 150° F

(-35° to 65° C)

Communication Lines

Wiegand = 500 ft - 22 AWG

(152 m)

300 ft - 24 AWG

(91 m)

RS-485 = Max. bus length

4000 ft - 24 AWG

(1,219 m)

Max length between nodes:

1,640 ft - 24 AWG (500m)

R10Ex1x2x3

RP10-H 900P 75mA RP10Ex1x2x3

R40-H 920N 65mA

110mA

R40Ex1x2x3

RP40-H 920P 85mA RP40Ex1x2x3

RK40-H 921N 85mA

125mA 220mA

RK40Ex1x2x3

RPK40-H 921P 95mA RPK40Ex1x2x3

RKCL40-P 923N

12VDC 150mA 185mA 250mA -4° to 122° F

(-20° to 50° C)

RKCL40Ex1x2x3

RPKCL40-P 923P RPKCL40Ex1x2x3

UL Reference Number Deciphering

x1 ReaderColors: K=Black

x2 Wiring: N=Pigtail

T=Terminal

x3 Communications: N=NoModule,

   R=RS-485(OSDP)

2 StandbyAVG-RMScurrentdrawwithoutacardintheRFeld.

3 MaximumAVG-RMScurrentdrawduringcontinuousPIVcardreads.

NotevaluatedbyUL.

4 Peak-highestinstantaneouscurrentdrawduringRFcommunication.

5 WiegandCableLengths:100ft(30.5m)22AWG@5-6.4VDC

500ft(152m)22AWG@6.5-16VDC

Junction box not included.

Mounting holes for US single-

gang electrical boxes.

Install gasket for RK40 and

RPK40 models.

Mounting holes for US

double-gang electrical

boxes.

Reverse Conﬁguration Rotating the backplate

180° allows for placing the Contact reader on left

and the Keypad reader on right.

See Section B Reconﬁgure Reader Assembly for

instructions, before proceeding to Section 2.

INSTALLATION GUIDE

hidglobal.com An ASSA ABLOY Group brand

trademarks of HID Global, ASSA ABLOY AB, or its aliate(s) in the U.S. and other countries and may not be used without permission. All other trademarks, service marks, and

product or service names are trademarks or registered trademarks of their respective owners.

This Installation Guide is for informational purposes only. HID makes no warranties, expressed or implied, in this summary. Company, product names and data used in sample output

are ﬁctitious. Speciﬁcations are subject to change without notice.

pivCLASS R10-H, RP10-H, R40-H, RP40-H, RK40-H, RPK40-H, RKCL40-P,

RPKCL40-P, RKCLB40-P

2 Wiring

Pigtail Terminal Description Pigtail Terminal Description

Yellow P1-1 Beeper Input Red / Green P2-7 *GPIO1/OSDP (RS485-FDX/HDX-A)

Orange P1-2 LED Input (GRN) Ta n P2-6 *GPIO2/OSDP (RS485-FDX/HDX-B)

Black P1-3 Ground (RTN) Violet P2-5 **Open Collector Output / Tamper

Red P1-4 +VDC White P2-4 ***Wiegand Data 1 / Clock

Drain P1-5 Unused Green P2-3 ***Wiegand Data 0 / Data

Brown P1-6 LED Input (RED) Pink P2-2 *GPIO3 (RS485-FDX-Z)

Blue P1-7 Hold Input Gray P2-1 *GPIO4 (RS485-FDX-Y)

*RS-485applicableforpivCLASSreaders.

**TamperOutput-Whenactivated,outputsynchronizestoground(default).

***Dependentuponreaderconguration.SeetheHTOGforWiegandandClock-in-Datacongurations.

ATTENTION

Observeprecautionsforhandling

ELECTROSTATICSENSITIVEDEVICES

Beeper

GRN LED

GND

+VDC

DRAIN

RED

HOLD

GPIO1

GP102

OC/TMPR

DATA1/CLK

DATA2/DATA

GPIO3

GPIO4

Beeper

GRN LED

GND

+VDC

DRAIN

RED

HOLD

GPIO1

GP102

OC/TMPR

DATA1/CLK

DATA2/DATA

GPIO3

GPIO4

18 in

(0.46 m)

BEEP (YEL)

GRN LED (ORN)

GND (BLK)

+VDC (RED)

DRAIN (BARE)

RED LED (BRN)

HOLD (BLU)

GPIO1(RED/GRN)

GPIO2 (TAN)

OC/TMPR (VIO)

DATA1 (WHT)

DATA2 (GRN)

GPIO3 (PINK)

GPIO4 (GRAY)

Terminal ReaderPigtail Reader

(Terminalblockandmodule

positionvaries)

(Modulepositionvaries)

Notes:

1.PreviousiCLASSreadershadreversedRS-485wiring

(P2-7&P2-6-A&B).WhenupgradingtoapivCLASS

reader,ensureproperconnectionsasdenedbelow.

2.Wiringthereaderincorrectlymaypermanentlydamage

thereader.

3.Forcablelengthsgreaterthan200ft.(61m)orEMF

interference,install120Ω+/-2Ωresistoracross

RS-485terminationends.

4.ItispossibletoreuseexistingWiegandwiringfor

OSDP,however,usingsimplestrandedcable(typicalof

Wiegandaccesscontrolreaders)usuallydoesnotmeet

RS-485twistedpairrecommendations.

INSTALLATION GUIDE

hidglobal.com An ASSA ABLOY Group brand

trademarks of HID Global, ASSA ABLOY AB, or its aliate(s) in the U.S. and other countries and may not be used without permission. All other trademarks, service marks, and

product or service names are trademarks or registered trademarks of their respective owners.

This Installation Guide is for informational purposes only. HID makes no warranties, expressed or implied, in this summary. Company, product names and data used in sample output

are ﬁctitious. Speciﬁcations are subject to change without notice.

pivCLASS R10-H, RP10-H, R40-H, RP40-H, RK40-H, RPK40-H, RKCL40-P,

RPKCL40-P, RKCLB40-P

3 Attach to Backplate

Contactless Models

Contact Models

Default: Slide Reader Assembly

towards the right to lock.

Attach Reader InstallSecurityScrew

Reversed Conﬁguration: Slide Reader

Assembly to the left to lock.

INSTALLATION GUIDE

hidglobal.com An ASSA ABLOY Group brand

trademarks of HID Global, ASSA ABLOY AB, or its aliate(s) in the U.S. and other countries and may not be used without permission. All other trademarks, service marks, and

product or service names are trademarks or registered trademarks of their respective owners.

This Installation Guide is for informational purposes only. HID makes no warranties, expressed or implied, in this summary. Company, product names and data used in sample output

are ﬁctitious. Speciﬁcations are subject to change without notice.

pivCLASS R10-H, RP10-H, R40-H, RP40-H, RK40-H, RPK40-H, RKCL40-P,

RPKCL40-P, RKCLB40-P

4 Power & Testing

Contactless Models

Contact Models

Turn on power Test card

Note:

Withakeypadreaderoperatingas26bitemulation,uponpowerupyouhave5secondstoentertheFacilityCodefollowedby#.

Ifunsuccessful,thereaderLEDdisplayssolidRed.Power-cyclethereaderandretryenteringtheFacilityCode.

TheFacilityCodeneedstobemanuallyenteredas3digits(forexample,iftheFacilityCodeis10,enter0-1-0-#).

SEreadersonlyuseFacilityCodesbetween1-255.ThereisnodefaultFacilityCode.

OncetheFacilityCodehasbeenentered,theLEDwilldisplayVioletandthentoanalRed.Thenpower-cyclethereader.

Whenusingakeypad,ifthereare2shortbeepsafterenteringyourPIN,thereaderdoesnothaveaFacilityCodeconguredyet.

Inthisevent,anAdministratorwillneedtopower-cyclethereaderandentertheFacilityCodebeforethereaderwillacceptyourPIN.

INSTALLATION GUIDE

hidglobal.com An ASSA ABLOY Group brand

trademarks of HID Global, ASSA ABLOY AB, or its aliate(s) in the U.S. and other countries and may not be used without permission. All other trademarks, service marks, and

product or service names are trademarks or registered trademarks of their respective owners.

This Installation Guide is for informational purposes only. HID makes no warranties, expressed or implied, in this summary. Company, product names and data used in sample output

are ﬁctitious. Speciﬁcations are subject to change without notice.

pivCLASS R10-H, RP10-H, R40-H, RP40-H, RK40-H, RPK40-H, RKCL40-P,

RPKCL40-P, RKCLB40-P

A Biometric Reader

Proper Usage

Ensure a good quality Contact:

• Do not press too hard

• Do not move during image acquisition

• Leave your finger on the sensor at least 2 seconds

• Do not slide or roll your finger across the sensor

Cleaning

For optimum performance, it is recommended that the user clean the bio-reader periodically.

The use of a dry cloth is recommended to clean the acquisition surface.

Caution: Acidic liquids, alcohol or abrasive materials are prohibited.

In order not to scratch the surface, remove all dust and residue with gentle movements.

Acquisition Surface

INSTALLATION GUIDE

hidglobal.com An ASSA ABLOY Group brand

trademarks of HID Global, ASSA ABLOY AB, or its aliate(s) in the U.S. and other countries and may not be used without permission. All other trademarks, service marks, and

product or service names are trademarks or registered trademarks of their respective owners.

This Installation Guide is for informational purposes only. HID makes no warranties, expressed or implied, in this summary. Company, product names and data used in sample output

are ﬁctitious. Speciﬁcations are subject to change without notice.

pivCLASS R10-H, RP10-H, R40-H, RP40-H, RK40-H, RPK40-H, RKCL40-P,

RPKCL40-P, RKCLB40-P

BReconﬁgure Reader Assembly

The following steps reconfigure the reader assembly to position

the Contact reader component on the left side of the assembly.

1. Disassemble the reader.

• Remove the Keypad reader from the backplate

• Carefully unplug the ribbon cable from the module in the

back of the Keypad reader. Caution: Do not pull on the ribbon

cable as this may damage the connection to the connector.

• Remove the Contact reader from the backplate

• Gently pull the ribbon cable through the backplate

2. Reassemble with the Contact reader on the left side of the assembly.

• Rotate the backplate so that the large cutout for the power cable is on the left

• Gently route the ribbon cable back through the backplate slots, as shown below

• Plug the ribbon cable back into the module (back of Keypad reader) and ensure module is fully

seated into the reader

• Attach the Contact reader to the backplate (this must be installed first, as the Keypad Reader will fit

slightly over the Contact reader)

• Attach the Keypad reader to the backplate (power cable must be threaded through the large

square cutout on the backplate)

• Return to Section 2

Contact reader Keypad reader

Backplate

Ribbon cable

Keypad reader

Contact reader

Backplate

Ribbon cable

Contact reader Keypad reader

hidglobal.com An ASSA ABLOY Group brand

INSTALLATION GUIDE pivCLASS R10-H, RP10-H, R40-H, RP40-H, RK40-H, RPK40-H, RKCL40-P,

RPKCL40-P, RKCLB40-P

CCredential Presentation Best Practices

To ensure a successful read of a PIV card:

1. Hold card between the thumb and index finger.

2. Present the card so that the index finger creates a spacing between the card and the reader face.

Do not place the card flat on the reader.

3. Place the card parallel to the reader form factor. Do not angle to the right or left

4. Place the card parallel to the reader face. Do not angle the card up or down from the reader

face.

Connect only to a Listed Access Control / Burglary power-limited power supply. These readers are intended to be used with listed (UL294) control

equipment.

All models are suitable for outdoor use.

Evaluated for use over Wiegand and RS-485 communications.

Evaluated for use with the M2000 pivCLASS Authentication Module as well as Standard Wiegand and OSDP panels.

FCC CertiFiCation

CAUTION: Any changes or modiﬁcations to this device not explicitly approved by manufacturer could void your authority to operate this

equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

HID Global

Americas & Corporate

611 Center Ridge Drive

Austin, TX 78758

USA

Support: 866 607 7339

Fax: 949 732 2120

Asia Paciﬁc

19/F 625 King's Road

North Point, Island East

Hong Kong

Support: 852 3160 9833

Fax: 852 3160 4809

Europe, Middle East & Africa

Phoenix Road

Haverhill, Suolk CB9 7AE

England

Support: 44 (0) 1440 711 822

Fax: 44 (0) 1440 714 840

For additional oces around the world, see www.hidglobal.com corporate oces.

HID Global Customer Support: www.hidglobal.com/customer-service

Equipment

8T29

ACC Control Reader

General Signaling

Equipment

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HID Lecteur de cartes

HID

HID OMNIKEY 5121 Manuel utilisateur

HID

HID Mercury MR62e Manuel utilisateur

HID

HID iCLASS SE U90 Series Manuel utilisateur

HID

HID Signo 20 Manuel utilisateur

HID

HID Miniprox Manuel utilisateur

HID

HID ProxPro II 5455 Manuel utilisateur

HID

HID iCLASS SE R10F Manuel utilisateur

HID

HID SmartID SK10 Manuel utilisateur

HID

HID multiCLASS RMK40 Manuel utilisateur

HID

HID Technology Solutions 1060 Manuel utilisateur

HID

HID Technology Solutions 1139 Manuel utilisateur

HID

HID ProxPoint Plus Manuel utilisateur

HID

HID MaxiProx 5375A Instructions d'utilisation et d'entretien

HID

HID Signo Series Manuel utilisateur

HID

HID MiniProx 5365 Manuel utilisateur

HID

HID iCLASS SE Express R10 Manuel utilisateur

HID

HID iCLASS R10 Manuel utilisateur

HID

HID iCLASS SE Biometric Reader Manuel utilisateur

HID

HID iCLASS SE R10EB Manuel utilisateur

HID

HID iCLASS R10 Manuel utilisateur

HID

HID OMNIKEY 5121 Manuel utilisateur

HID

HID iCLASS R90 Manuel

HID

HID OMNIKEY 2061 Manuel utilisateur

HID

HID iCLASS SE Manuel utilisateur

Manuels Lecteur de cartes populaires d'autres marques

Lindy

Lindy 43185 Manuel utilisateur

Lindy

Lindy 43185 Manuel utilisateur

ViziT

ViziT RD-4F Manuel utilisateur

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Manuel utilisateur

AVID ID

AVID ID AVID1043 Manuel utilisateur

Conrad

Conrad PCMCIA Manuel utilisateur

Rosslare

Rosslare DR-6255 Manuel utilisateur

Lindy

Lindy 51541 Manuel utilisateur

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Manuel utilisateur

Johnson Controls

Johnson Controls Kantech tyco ioSmart Manuel utilisateur

ACS

ACS ACR122L Manuel utilisateur

Secukey

Secukey S2-MF Manuel utilisateur

Elecom

Elecom MR-SMC07 series Manuel utilisateur

Alien

Alien ALR-9800 Manuel utilisateur

ACS

ACS ACR310 Manuel utilisateur

Datamars

Datamars R-IN1300 MID Manuel utilisateur

Alarm Lock

Alarm Lock AL-PRE2 Manuel utilisateur

xpr

xpr B100PROX-AH Guide de l'utilisateur

HID pivCLASS R10-H Manuel utilisateur

Manuels Lecteur de cartes populaires d'autres marques