Important safety information
3
Important safety information
Please read these operating instructions carefully and completely
prior to working with the instrument.
Ensure that the operating instructions are always available for all
users.
Always pass the data logger on to a third party together with these
operating instructions.
Also observe the respective operating instructions of the Tes-
tomat®808 instrument! For further information, please visit
http://www.heyl.de.
Intended use
This data logger for the Testomat®808 allows all measurements and
messages issued by the Testomat®808 unit using its current inter-
face to be stored, downloaded and displayed on a PC via a USB port.
A software program is provided for setting up the data logger and for
downloading the data.
Only a browser is required to display the data.
Always adhere to the performance limits stated in the section enti-
tled “Technical data”.
To ensure correct and intended usage, always read and understand
these instructions, especially the section entitled “Important safety
information”, prior to use.
The instrument is not used as intended if
it is used in areas not specified in these instructions.
it is used in conditions which do not correspond to the ones de-
scribed in these instructions.
Qualification of the staff
Assembly and commissioning of the device
requires basic electrical knowledge
PC knowledge
Assembly and commissioning should therefore only be carried out by
a specialist or by an authorised individual supervised by a specialist.
A specialist is someone who due to his/her technical training, know-
how and experience as well as knowledge of relevant regulations can
assess assigned tasks, recognise potential hazards and ensure ap-
propriate safety measures. A specialist should always adhere to the
relevant technical regulations.
