Introduction
LD8 Installation Manual AB-V-MA-00634_RevA 9
1.8 DISCLAIMER
VERIPOS Limited (hereinafter referred to as “VERIPOS”) has taken every care in the preparation of the
content of this Manual (“Manual”). This Manual and its contents are provided “as is” without any
representations or warranties, express or implied. VERIPOS makes no representations or warranties in
relation to this Manual and the content provided herein, including but not limited to the safety, suitability,
inaccuracies or typographical errors of this Manual. There are inherent dangers in the use of any software
(including any firmware), and the end user is solely responsible for determining whether the relevant software
provided by VERIPOS and this Manual are compatible with the end user’s equipment and other software
installed on such equipment. End user is also solely responsible for the protection of equipment and the
backup of data.
VERIPOS reserves the right at its sole discretion, but without any obligation, to make amendments or
improvements to, or withdraw or correct any error(s) or omission(s) in any portion of the Manual without notice.
Although VERIPOS makes a reasonable effort to include accurate and up to date information, VERIPOS does
not warrant or represent that this Manual and its contents are current, complete, accurate and/or free from
errors. VERIPOS does not accept any responsibility or liability for the accuracy, content, completeness, legality
or reliability of this Manual and the content provided herein.
If
you
have
any
questions
or
comments
about
this
M
anual,
please
contact
us
at:
s
[email protected].
VERIPOS accepts no responsibility for any damage or injury to any system, ship or personnel caused by
drawings, instructions or procedures not prepared by VERIPOS.
The software described in this document is furnished under a licence agreement and/or non-disclosure
agreement. The software may be used or copied only in accordance with the terms of such agreement. It is
against the law to copy the software on any medium except as specifically provided for in the license or non-
disclosure agreement.
Copyright © 2019 VERIPOS Limited. All rights reserved.
No part of this Manual and its contents may be reproduced, copied, re-engineered, adapted, redistributed,
published, commercially exploited or transmitted in any form, by any means, electronic or mechanical,
including photocopying or recording, without the express prior written permission of VERIPOS. Applications for
any written permission should be addressed to VERIPOS House, 1B Farburn Terrace, Dyce, Aberdeen, AB21
7DT, United Kingdom.
Unauthorised reproduction, copying, re-engineering, adaptation, redistribution, publication or commercial
exploitation of this Manual or its contents may be subject to civil as well as criminal sanctions under the
applicable laws. VERIPOS will aggressively protect and enforce its intellectual property rights to the fullest
extent, which may include seeking all available remedies in the civil or criminal courts if necessary. Where
reproduction, copying, re-engineering, adaptation, redistribution, publication or commercial exploitation of this
Manual or its contents has been permitted by VERIPOS in accordance with this disclaimer, then no changes in
the Manual or deletion of any kind to the Manual may be made. You acknowledge that you do not acquire any
ownership rights by accessing, viewing or utilising this Manual and agree that you shall not hold itself out to
any third party as having any ownership rights to this Manual.
You further agree to save, indemnify, defend and hold VERIPOS harmless on written demand, from all claims,
losses, damages, costs (including legal costs), expenses and liabilities of any kind and nature, invoked against
VERIPOS by any third party, for or arising out of, any alleged infringement of any proprietary or protected right
arising out of or in connection with your utilisation of this Manual and/or in connection with any representation
made by you to third parties of ownership of any kind with respect to this Manual.
VERIPOS ®is a trademark of VERIPOS Limited and/or its licensors. All other marks used herein are
trademarks of their respective holders.
