l.Advice For the 1"'use
For stable and reliable results, it is essential to check the
Non-contact Body lR thermometer and adjust as needed
with the following steps:
1" step: Take the temperature of a person using a
conventional thermometer and get the test result,
37.5"C (99.5"F) for example.
2'o step: Take the lemperature of the same person using the
Non-contact Body lR thermometer keeping 3 -scm (1.2
-2.0 in) bgtween the thermometer and the forehead (Be
sure to remove any obstacle on the forehead which may
affect the testing result, such as hair, perspiration
etc., lf you get 37.5'C (99.5'F), that is to say the Non-
contact Body lR thermometer is properly set and ready
for use-
lf you get a lower temperature, 36.4'C (97.5"F) for
example, the diffsrence is 37.5-36.4=1 .1'C(2.0'F).
You should adjust the temperature on the Non-contact
Body I R thermometer and add the difference, e.g. 1 .'l "C
(2.0"F).
To adjusi the difference, keep pressing the MODE
bulton, the screen displays F1, shortly press the MODE
or MEMO button to add the difference, e.g. 1 .1'C
(2.0'F), then short press ON/SCAN button several
times until the device power off automatically.
3'd step: Take lhe temperature again using the Non-contact
Body I R thermometer to check whether the
thermometer is properly set.
2.General D-escriptions
The non-contact IR th6rmometer is specially designed for
testing baby forehead temperature, it has two models: Body
mode for measuring body temperature and Surface model
for measuring obiect surface temperature, Besides baby
forehead temperature, il can also test the temperatures of
room, food, bath water, babymilketc. ltadoptthe most
advanced infrared techniques, acquire the aim temperature
quickly, analyze the data intelligently and display the result
within 0.5 seconds.
Note: Depending on various skin types and thickness, the
test result may be diffsrent.
3.Safety !nformation
> This device must only be used for the purposes
described in this inslruction manual.
> Do not expose this thermometerto electric shocks.
> Do not use the device in relative humidity > 85%.
> Do not use the device near large elgctromagneticfields
such as found with cordless orcell phones.
> Keep the device away from water and heat, including
direct sunlight,
> Do not drop or knock the device ,and do not use it if
damaged.
> lt may affect the accuracy of measurements when the
forehead is covered by hair, perspiration, cap or scarf.
> lfit can't measure the forehead temperature due to
perspiration or other factors, please take tha temperature
behind the sar lobe.
> Clean the glass with cotton bud lightly moistened with
707o alcohol. @o
