HESA TCN-20M Manuel utilisateur
1/38
User Manual
IP CA M E R A
TCN-20M
(COD. KUNTC20M)
DT01846HE0510R00
2/38
WARINGS
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MISTURE.
DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS.
CAUTION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION_TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
COPYRIGHT
THE TRADEMARKS MENTIONED IN THE MANUAL ARE LEGALLY REGISTERED
TO THEIR RESPECTIVE COMPANIES.
3/38
Content
I. PREFACE.............................................................................................................................................. 4
II. PRODUCT SPECIFICATIONS............................................................................................................. 4
III. PRODUCT INSTALLATION ................................................................................................................. 6
A. MONITOR SETTING ............................................................................................................................................6
B. HARDWARE INSTALLATION AND I/O PIN ASSIGNMENT ....................................................................................7
C. IP ASSIGNMENT .................................................................................................................................................9
D. INSTALL ACTIVEX CONTROL:..........................................................................................................................11
IV. LIVE VIDEO ........................................................................................................................................ 13
V. CONFIGURATION .............................................................................................................................. 15
A. SYSTEM............................................................................................................................................................16
B. NETWORK ........................................................................................................................................................19
C. A/V SETTING ...................................................................................................................................................25
D. EVENT LIST......................................................................................................................................................30
VI. NETWORK CONFIGURATION.......................................................................................................... 35
VII. FACTORY DEFAULT .......................................................................................................................... 37
VIII. PACKAGE CONTENTS ..................................................................................................................... 37
APPENDIX I ................................................................................................................................................. 37
V1.0_090903
4/38
I. Preface
This is a CMOS IP camera with the web server built in. User can view real-time
video via IE browser. It supports H.264, JPEG and MPEG4(3GPP Only) video
compression which provides smooth and high video quality. The video can be
stored in the SD card and playback remotely.
With user friendly interface, it is an easy-to-use IP camera which is designed for
security application.
II.Product Specifications
2M-Pixel CMOS Sensor
Power over Ethernet (Optional)
H.264/ MJPEG/ MPEG4 (3GPP Only) Compression Format
SD Card backup
2-way audio
Support Cell phone/PDA/3GPP
2 Streaming (H.264/ M-JPEG)
SDK for Software Integration
Free Bundle 36 Channel Recording Software
Specifications
Hardware
CPU ARM 9 ,32 bit RISC
RAM 128MB
Flash 8MB
Image sensor 1/3” CMOS (2M-Pixel)
Lens Changeable Yes, CS Mount
Support DC IRIS Yes
I/O 1 in/ 1 Relay Out
RS-485 Yes
Video Out x1
Audio in Mic Built-in
Audio Out x1 (RCA Type)
Power over Ethernet Yes
Power DC 12V, 450mA
Dimensions 58mm (W) x 65mm (L) x 131.5mm (D)
Network
5/38
Ethernet 10/ 100 Base-T
Network Protocol HTTP, TCP/ IP, SMTP, FTP, PPPoE, DHCP,
DDNS, NTP, UPnP, 3GPP
Wireless (Optional)
Wireless 802.11b/g
Security WEP,WPA-PSK,WPA2-PSK
System
Video Resolution
1600x1200, 1280x1024, 1280x960,1280x720,
800x600,640x480, 320x240, 176x144
Triple Streaming Yes
CMOS setting Brightness, Contrast, Sharpness, BLC, Night
Mode
Image snapshot Yes
Full screen monitoring Yes
Privacy Mask Yes, 3 different areas
Compression format H.264/ M-JPEG/ MPEG4(3GPP only)
Video bitrates adjust CBR, VBR
Motion Detection Yes, 3 different areas
Triggered action Mail, FTP, Save to SD card, Relay
Pre/ Post alarm Yes, configurable
Security Password protection
Firmware upgrade HTTP mode, can be upgraded remotely
Simultaneous
connection
Up to 10
Audio Yes, 2-way
SD card management
Recording trigger Motion Detection, IP check, Network break
down (wire only), schedule, alarm
Video format AVI, JPEG
Video playback Yes
Delete files Yes
Web browsing requirement
OS Windows 2000, XP, 2003, Microsoft IE 6.0 or
above
Hardware Suggested Intel Dual Core 1.66G,RAM: 1024MB, Graphic
card: 128MB
Minimum Intel-C 2.8G, RAM: 512MB, Graphic card: 64MB
6/38
III. Product Installation
A. Monitor Setting
i. Right-Click on the desktop. Select “ Properties”
ii. Change color quality to highest (32bit).
7/38
B. Hardware Installation and I/O Pin
Assignment
i. Connect power adaptor
ii. Connect IP Cam to PC or network with Ethernet cable
iii. Set up the network configurations according to the network
environment. For further explanation, please refer to chapter VI,
“Network Configuration for IP CAMERA”.
iv. PoE ( Power Over Ethernet) 802.3af, 15.4W PoE Switch is recommended
Power over Ethernet (PoE) is a technology that integrates power into a
standard LAN infrastructure. It enables power to be provided to the
network device, such as an IP phone or a network camera, using the
same cable as that used for network connection. It eliminates the need
for power outlets at the camera locations and enables easier application
of uninterruptible power supplies (UPS) to ensure 24 hours a day, 7
days a week operation.
8/38
Ethernet
PoE
Switch
PoE IP Camera
PoE IP Camera
Ethernet Cable
Ethernet Cable
9/38
C. IP Assignment
i. Use the software, “IP Installer” to assign the IP address of IP CAMERA.
The software is in the attached software CD.
ii. IP installer supports two languages
a. IPInstallerCht.exe_Chinese version
b. IPInstallerEng.exe_English version
iii. There are 3 kinds of IP configuration.
a. Fixed IP (Public IP or Virtual IP)
b. DHCP (Dynamic IP)
c. Dial-up (PPPoE)
iv. Execute IP Installer
v. For Windows XP SP2 user, it may popup the following message box.
Please click “Unblock”.
vi. IP Installer configuration:
vii. IP Installer will search all IP Cameras connected on Lan. The user can
click “Search Device” to search again.
viii. Click one of the IP Camera listed on the left side. The network
configuration of this IP camera will show on the right side. You may
change the “name” of the IP Camera to your preference (eg: Office,
warehouse). Change the parameter and click “Submit” then click “OK”.
It will apply the change and reboot the Device.
10/38
ix. Please make sure the subnet of PC IP address and IP CAM IP address
are the same.
The same Subnet:
IP CAM IP address: 192.168.1.200
PC IP address: 192.168.1.100
Different Subnets:
IP CAM IP address: 192.168.2.200
PC IP address: 192.168.1.100
To Change PC IP address:
Control PanelNetwork ConnectionsLocal Area Connection
PropertiesInternet Protocol (TCP/IP) Properties
Please make sure your IP Camera and PC have the same Subnet. If not,
please change IP Camera subnet or PC IP subnet accordingly.
x. A quick way to access remote monitoring is to left-click the mouse twice
on a selected IP Camera listed on “Device list” of IP Installer. An IE
browser will be opened.
xi. Then, please key in the default “user name: admin” and “password:
admin”.
Table des matières
Autres manuels HESA Caméra de sécurité
