5
1 - INTRODUCTION
IMPORTANT! All local regulations and standards must be adhered to with regards to installation of this
heater and chimney flue. Installation must be carried out by a suitably qualified professional installer.
Check with your local authority for clarification.
The way the E-30 Stove is installed will directly affect safety issues and its correct operation and function.
It is important to install the fireplace correctly. For the correct installation of the E-30 Stove and chimney,
we recommend the installation be performed by a professional.
The E-30 Stove provides heat by radiation; directly heating walls, ceilings and surrounds.
2 - PRESENTATION
E-30 wood stoves have the following main features:
•Made of cast iron for even distribution of heat and longevity, all parts are assembled, sealed and
bolted together.
•The internal lining is manufactured in cast iron with a white Satin Enamel finish.
•The baffles keeping the hot flue gases in the firebox for longer, are also made of cast iron,
including the vertical top baffle extension. The tertiary burn of flue products above the baffle
also making the unit more efficient.
•The chimney flue can exit through the top or as an option it can be rear flued. Simply swap the
blanking plate (7) with the flue spigot (6).
•The solid cast iron hinged front door contains a ceramic glass pane great for radiating the heat.
•Designed for use with hardwood firewood only.
•The firebox can easily burn pieces of wood up to 50cm in length.
•The removable Ash tray with the solid cast iron front makes it easy to remove all the ash during
Maintenance cleaning. Note that the Ash-tray must be fully pushed back into position while
running the fire.
•Includes a solid base, designed for burning with a bed of ash included.
•Push / Pull handle controls for Primary and Secondary air adjustment.
•Pilot air valve opens when air control is fully open, for quick lighting of the heater by bellowing the
base of the fire.
•The Secondary air supply includes air wash for Self-cleaning glass.
•Optional outside air connection located on the back of the ash pan to supply air to firebox 80mm
Diameter.
•Adjustable feet screws to stabilize the stove when installed in un even surfaces.
•This fireplace provides heat by radiation, directly heating walls, ceilings, furniture and you!
•Fully factory assembled, ready for connection to the chimney flue.
