HEPER NORMA S Instructions d'installation et d'utilisation

S13

40 Nm

NORMA S LED

Installation&Maintenance Instructions

3xM8 Washers

3xM8 Nuts

Mm/ Inch

200

148

Min 40

200

7 2/3

5 53/64

Min 1 37/64

7 2/3

1 37/64

HEPER USA LLC

W227 N546 Westmound

Drive Waukesha

WI 53186 – USA

Tel: +1 917 244 20 32

[email protected]

www.heperlighting.com

2020-0/12.24.2020

(Mm)

(Inch)

(Mm)

(Inch)

(Mm)

(Inch)

AĞIRLIK

WEIGHT

(Kg)

(Lb)

BOLARD

KODU

BOLARD

CODE

1015

39 61/64

100

3 15/16

100

3 15/16

3,5

7,72

LB6054.693

S10

10 Nm

2xM6 Nuts

M4 Flat Head Screws

1.5 Nm

2xM4 Flat Head Screws

1.5 Nm

M3 Flat Head Screws

ASSEMBLY INSTRUCTIONS

To mount the Bollard onto the ground;

1. The floor on which the bolars will be mounted must be flat.

2. Concrete detail;

2.1. A template plate is used to align the connection holes of the product. ( Hole Center: 40

mm)

2.2. The anchor bolt is fixed in the concrete using the template plate at least 40 mm

above the floor.

3. After the anchor flange plate is placed in its place, flat washers are placed under them

and the nuts are fixed in their places with a torque of 25Nm. (3 Pieces, M8 Nuts)

4. The cable coming from the Floor to Bolard and the cable coming out of the product

are assembled with the help of a socket.

Note: It does not come with a socket for connecting cables. Please purchase a socket with

a minimum IP66 certification suitable for the product.

5. The bollard is placed on the ground anchor flange plate in the direction of the arrow. It

is locked by turning it in the direction of the arrow.

To Reach LED Driver ;

6. Anchor flange plate is removed.

7. The stud bolts holding the bolard together are removed. (2 Pieces, M6 Nuts)

Note: Nuts are fixed with 10Nm torque when assembling.

8. Studs and upper profile are removed.

9. Disconnecting the LED driver group;

9.1. The grounding bolt is removed. (1 Piece, M4 YSB Bolt)

Note: M4 YSB Bolt is tightened with 1.5Nm torque while installing the grounding

cable.

9.2. Sockets are removed.

10. Led driver group is removed.

11. The LED driver group is turned and removed from its place on

the body.

To Reach LED Driver;

12. Cables coming to PCB in LED driver are disconnected.

13. To remove LED Driver;

13.1. LED driver plate bolts are removed. (2 Pieces, M4 YSB Bolts)

13.2. M3 bolt is removed. Led driver plate is separated from the LED

driver.

Note 1: Care should be taken not to drop the LED driver.

Note 2: When mounting the LED driver to its place, the bolts should be tightened with 1.5

Nm torque.

English

Safety Instructions

•The light source contained in this luminaire shall only be replaced by the manufacturer or his

service agent or a similar qualified person. Always switch off the power prior to installation,

maintenance or repair activities.

•

The manufacturer is then discharged from liability when damage is caused by improper use or

installation.

If any luminaire is subsequently modified, the persons responsible for the modification shall be

considered as manufacturer.

To reduce the risk of death, personal injury or property damage from fire, electric shock, falling

parts, cuts, abrasions and other hazards, please read all warnings and instructions included

with the luminaire, on the luminaire’s packaging and affixed to the luminaire itself..

Installatio

LEDs are high-quality electronic components! Please avoid contacting the light output opening

of the LED directly during installation or relamping.

IMPORTANT

To ensure secure connection, the luminaire housing must be positioned precisely in relation to

the mounting plate.

Cleaning And Maintenance

•Clean luminaire regularly with solvent-free cleaners from dirt. Please do not do not clean the

luminaire with using high-pressure liquids.

WARNINGS AND REMARKS FOR

INSTALLATION AND MAINTENANCE

Table des matières

Autres manuels HEPER Éclairage extérieur

HEPER

HEPER DOMINI AFX MIDI 1 Module Instructions d'installation et d'utilisation

HEPER

HEPER DRAGO Side Duo Instructions d'installation et d'utilisation

HEPER

HEPER PUNTO Instructions d'installation et d'utilisation

HEPER

HEPER LF8035.523-US Instructions d'installation et d'utilisation

HEPER

HEPER ZEROX S Hybrid Instructions d'installation et d'utilisation

HEPER

HEPER LP4034.863-US Instructions d'installation et d'utilisation

HEPER

HEPER ZEROX M Dyno Instructions d'installation et d'utilisation

HEPER

HEPER DOGO EX Instructions d'installation et d'utilisation

HEPER

HEPER DOMINO ML EVO 1 Instructions d'installation et d'utilisation

HEPER

HEPER TILA S AFX 3 Module Instructions d'installation et d'utilisation

HEPER

HEPER PRIFMA ML EVO 1 Instructions d'installation et d'utilisation

HEPER

HEPER PRIFMA ML EVO 2 Module Duo Instructions d'installation et d'utilisation

HEPER

HEPER PRIFMA AFX 1 Module Duo Instructions d'installation et d'utilisation

HEPER

HEPER RHINO ML 1 Module Instructions d'installation et d'utilisation

HEPER

HEPER PRIFMA ML EVO 1 Instructions d'installation et d'utilisation

HEPER

HEPER TROLI S Instructions d'installation et d'utilisation

HEPER

HEPER TURA 4x12 LED Instructions d'installation et d'utilisation

HEPER

HEPER LL2023.865-US Instructions d'installation et d'utilisation

HEPER

HEPER MINIKA Instructions d'installation et d'utilisation

HEPER

HEPER D-LIGHT L AFX 8 Module Instructions d'installation et d'utilisation

HEPER

HEPER TURA 2x12 LED Instructions d'installation et d'utilisation

HEPER

HEPER MINIMO 4x90 Instructions d'installation et d'utilisation

HEPER

HEPER REGIO Instructions d'installation et d'utilisation

HEPER

HEPER Rhino Flood Instructions d'installation et d'utilisation

Manuels Éclairage extérieur populaires d'autres marques

Sealey

Sealey LED37 Manuel utilisateur

nordlux

nordlux VEJERS Guide de l'utilisateur

SImx

SImx ELITE LED LHTC637 Manuel utilisateur

GEV

GEV CAROLINE 10833 Manuel utilisateur

NEBO

NEBO NEB-LSP-0020 Manuel utilisateur

WE-EF

WE-EF PFL540 LED Manuel utilisateur

Lindby

Lindby 9949029 Manuel utilisateur

Maretti

Maretti VIBE S 14.6080.04.A Manuel utilisateur

BEGA

BEGA 84 253 Manuel

LIGMAN

LIGMAN BAMBOO 3 Manuel utilisateur

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Manuel utilisateur

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Manuel utilisateur

urban ambiance

urban ambiance UQL1273 Manuel utilisateur

TotalPond

TotalPond 52238 Manuel utilisateur

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Manuel utilisateur

LIGMAN

LIGMAN DE-20023 Manuel utilisateur

Spectroline

Spectroline MAXIMA ML-3500 Series Manuel utilisateur

Pro-Elec

Pro-Elec PELL0264 Manuel utilisateur