Helios CUBE Manuel utilisateur
HELIOS CUBE
Energy Storage
System
BS4850-SH
User Manual
Lithium-Ion Battery Storage
© Copyright 2020. Helios New Energy Technology (Australia) Pty Ltd.
All rights reserved.
No part of this document may be reproduced or transmitted in any form or by
any means without prior written consent of Helios New Energy Technology
(Australia) Pty Ltd
User Manual
Energy Storage Inverter
H-BL(3600-5000) Series
Helios New Energy Technology (Australia) Pty Ltd
i
Notice
The purchased products, services and features are stipulated by the contract made between
HELIOS and the customer. All or part of the products, services and features described in this
document may not be within the purchase scope or the usage scope. Unless otherwise
specification in the contract, all statements, information, and recommendations in this
document are provided “AS IS” without warranties, guarantees or representations of any
kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been
made in the preparation of this document to ensure accuracy of the contents, but all
statements, information, and recommendations in this document do not constitute a
warranty of any kind, express or implied.
Helios New Energy Technology (Australia) Pty Ltd
Address:
9 Blue Gum Road
Annangrove, NSW 2156
Australia
Telephone:
+61 (2) 96792284
Mobile:
+61 (0) 414633071
Website:
www.heliosenergystorage.com.au
E-mail:
mail@heliosenergystorage.com.au
Foreword
HELIOS CUBE BS4850-SH
User Manual
ii
Helios New Energy Technology (Australia) Pty Ltd
FOREWORD
SUMMARIES
This document describes the mounting, installation, commissioning, configuration,
operation, troubleshooting and decommissioning of the product. The latest version of this
document can also be downloaded in PDF format at www.heliosenergystorage.com.au.
This document is intended for installers and users.
Before installing and operating the product, ensure that you are familiar with the features,
functions, and safety precautions provided in this document.
SYM BOL CONVENTIONS
The symbols in this document are intended to alert installers and users with safety matters
during installation, operation and maintenance and defined as follows.
Symbol
Description
Alerts you to a high risk hazard that could, if not avoided, result in
serious injury or death.
Alerts you to a medium or low risk hazard that could, if not avoided,
result in moderate or minor injury.
Alerts you to a potentially hazardous situation that could, if not
avoided, result in equipment damage, data loss, performance
deterioration, or unanticipated results.
Anti-static prompting.
Electric shock prompting.
Hight temperature prompting
Provides a tip that may help you solve a problem or save time.
Provides additional information to emphasize or supplement important
points in the main text.
HELIOS CUBE BS4850-SH
User Manual
Foreword
Helios New Energy Technology (Australia) Pty Ltd
iii
CHANGE HISTORY
Changes between document issues are cumulative. The latest document issue contains all
the changes made in earlier issues.
VER SION 1.0 (MAY 1, 2022)
➢First issue
Contents
HELIOS CUBE BS4850-SH
User Manual
iv
Helios New Energy Technology (Australia) Pty Ltd
CONTENTS
1. Safety Instructions .......................................................................................................................1
2. Overview........................................................................................................................................8
2.1 Product Description ......................................................................................................................................... 8
2.2 Exterior view .................................................................................................................................................... 9
2.3 Dimensions..................................................................................................................................................... 11
2.4 Technical Specification................................................................................................................................... 11
3. Installation...................................................................................................................................13
3.1 Unpacking and Checking................................................................................................................................ 13
3.2 Tools and Instruments ................................................................................................................................... 13
3.3 Installation Environment Requirements ....................................................................................................... 15
3.4 Installation Clearance .................................................................................................................................... 16
3.5 Installation Procedure.................................................................................................................................... 16
4. Commissioning and Operation...............................................................................................21
4.1 Checking before Commissioning.................................................................................................................... 21
4.2 Battery address setting.................................................................................................................................. 21
4.3 Commissioning ............................................................................................................................................... 23
4.4 Operation ....................................................................................................................................................... 23
5. Maintenance and Troubleshooting ........................................................................................26
5.1 Maintenance .................................................................................................................................................. 26
5.2 Troubleshooting ............................................................................................................................................. 26
6. Emergency Situation..................................................................................................................29
HELIOS CUBE BS4850-SH
User Manual
1. Safety Instructions
Helios New Energy Technology (Australia) Pty Ltd
1
1. SAFETY INSTRUCTIONS
This chapter contains safety instructions that must be observed at all time when working on or with the product.
To prevent personal injury and property damage and to ensure long-term operation of the product, read this
chapter carefully prior to performing installation, operations and maintenance etc.
General Safety
Only qualified persons are allowed to install, connect cables for, commission, maintain, and troubleshoot the
product, who are required to:
⚫Obtain adequate professional training.
⚫Read through this document and follow all the instructions.
⚫Be familiar with the safety specifications about the electrical system.
⚫Understand the components and working principles of the grid-tied PV system and local regulations.
⚫Wear proper personal protective equipment (PPE).
⚫If the batteries are stored for a long time, it is required to charge them every six months, and the SOC
should be no less than 10%.
⚫The batteries should be recharged within 12 hours, after fully discharged.
⚫All the batteries must be disconnected by pulling out them from the cabinet for maintenance.
⚫Do not expose the batteries to flammable or harsh chemicals or vapors.
⚫Do not connect the batteries with PV solar wiring directly.
⚫Do not paint any part of the batteries including any internal or external components.
HELIOS will not be liable for any consequence caused by the violation of the safety operation regulations and
design, production, and usage standards.
The "DANGER", "WARNING", "CAUTION", “TIP” and "NOTE" marks in this document do not represent all the
safety instructions. They are only supplements to the safety instructions.
Danger to life due to electric shock. The product operates at high voltages with multiple channel power
suppliers. Prior to performing any work on the product, disconnect the product from voltage sources. All work
on the product must be carried out by qualified persons only.
1. Safety Instructions
HELIOS CUBE BS4850-SH
User Manual
2
Helios New Energy Technology (Australia) Pty Ltd
⚫Some parts of the enclosure can get hot (up to 60℃) during operation.
⚫Mount the product in such a way that it cannot be touched inadvertently during operation.
⚫No liquid or other objects are allowed to enter the product.
⚫If the product is dirty, clean the enclosure, the enclosure lid, the type label and the LEDs using only clean
water and a cloth. The use of cleaning agent may cause damage to the product.
⚫Prior to performing any work on the product, please turn off the battery DC breaker and then wait for 5
minutes.
⚫Before installing or operating the product, please check that there is no damage or other potential danger
in the product visually.
⚫Check the connections with other external devices are in order and safe.
⚫Do not touch non-insulated cable ends.
⚫Do not touch any live components.
⚫Have the product mounted, installed and commissioned only by qualified persons with the appropriate
skills.
⚫If an error occurs, have it rectified by qualified persons only.
⚫In case of fire, please use dry power fire extinguisher. A liquid fire extinguisher may cause electric shock.
⚫Short-circuit currents in the batteries can cause heat build-up and electric arcs which may result in burns
or eye injuries.
⚫Remove watches, rings and other metal objects.
⚫Use insulated tools.
⚫Wear proper personal protective equipment (PPE)
⚫Do not place tools or metal parts on the product
HELIOS CUBE BS4850-SH
User Manual
1. Safety Instructions
Helios New Energy Technology (Australia) Pty Ltd
3
Device Labels
⚫The labels on the device contain important information about safety operation. Don't tear them off or
damage them.
Pay attention to the labels on the device which are explained in Table 1-1.
Table 1-1 Explanation of the device labels
Label
Explanation
CE marking. The product complies with the requirements of the applicable
EU directives.
Intertek marking. The product has passed the Intertek test.
SAA marking. The product has obtained the SAA approval.
Australian Compliance marking.
Don't dispose with general garbage. Recycle them by special method.
Read the user manual when using the device.
Wait for 5 minutes to discharge completely after powering the device off.
Hot surface. Don't touch!
Caution!
Be careful of electric shock.
Ce manuel convient aux modèles suivants
1
Table des matières
Manuels Stockage populaires d'autres marques
Spectra Logic
Spectra Logic T-Series Spectra T50e Manuel utilisateur
Panasonic
Panasonic LKM-F931-1 Manuel utilisateur
Tabernus
Tabernus Enterprise Erase E2400 Manuel utilisateur
Rocstor
Rocstor COMMANDER 3F series Manuel utilisateur
HP
HP P9000 Manuel utilisateur
Western Digital
Western Digital Ultrastar Data60 Manuel utilisateur