HECKLER H599 Manuel utilisateur
H599 - PTZ Camera Mount
Universal Wall Mount for Pan Tilt Zoom Cameras
Designed & made in Arizona
Patented
2
IN THE BOX
PTZ Camera Mount
1 x
Wall Anchor
2 x
1/4-20 Camera-mounting screw
2 x
Camera-mounting Hex Key
1 x
Assembly Hex Key
1 x
Wall-mounting Screw
1 x
Cable Tie
1 x
3
TOOLS NEEDED
COMPONENTS NEEDED
(Not Included)
3/4” Drill Bit Level
Tape Measure Power Drill
Pen
If you have any questions, please contact
service@hecklerdesign.com.
Phillips Bit
PTZ Power and Data CablesPTZ Camera
Loosen the screws and slide the upper
bracket out through the keyholes.
STEP 1
Disassemble PTZ Camera Mount.
4
Lower Bracket
Upper Bracket
6
STEP 2
Select mounting location.
STEP 3
Mounting options.
Skip step 4 and 5
5
Wall Anchor Gang Box (not included)
STEP 4
Mark wall anchor locations.
7
8
STEP 5
Install wall anchor and drill a 3/4” hole.
9
STEP 6
Route cabling, then assemble upper
bracket to the lower bracket.
10
STEP 7
Mount PTZ camera.
Table des matières
Autres manuels HECKLER Accessoires pour appareils photo
