Heatmiser PRT-E1 Manuel utilisateur
1
Model: PRT-E
Model: PRT-E
2
Slimline Series
2Model: PRT-E
Model: PRT-E
Slimline Series1
Table of Contents
1
2
3-4
5-6
7-8
9
10
11
12-13
14
15
16
17
18
19
20-23
24
25
26
Product Image
Table of Contents
What is a Programmable Room Thermostat?
Installation Procedure
LCD Display
Operating Mode
Setting the Clock
Temperature Display
Setting the Comfort Levels
Locking the Thermostat
Setting the Temperature
Temperature Hold
Holiday Programming
Frost Protection
Power On / O
Optional Features
Re-calibrating the Thermostat
Factory Reset
Wiring Diagram
43
Slimline Series Model: PRT-E
The way to set and use your programmable room thermostat is to nd the lowest
temperature settings that you are comfortable with at the dierent times you have
chosen, and then leave it alone to do its job.
The best way to do this is to set the room thermostat to a low temperature
– say 18°C , and then turn it up by 1°C each day until you are comfortable with the
temperature. You won’t have to adjust the thermostat further. Any adjustment above
this setting will waste energy and cost you more money.
You are able to temporarily adjust the heating program by overriding or using the
temperature hold feature. These features are explained further on pages 15 and 16
of this manual.
Programmable room thermostats need a free ow of air to sense the temperature,
so they must not be covered by curtains or blocked by furniture. Nearby electric
res, televisions, wall or table lamps may also prevent the thermostat from working
properly.
What is a Programmable Room Thermostat?
A programmable room thermostat is both a programmer and a room thermostat.
A programmer allows you to set “On” and “O” periods to suit your own lifestyle.
A room thermostat works by sensing the air temperature, switching on the heating when
the air temperature falls below the thermostat setting, and switching it o once this set
temperature has been reached.
So a programmable room thermostat lets you choose what times you want the heating
to be on, and what temperature it should reach while it is on. It will allow you to select
dierent temperatures in your home at dierent times of the day (and days of the week)
to meet your particular needs and preferences.
Setting a programmable room thermostat to a higher temperature will not make the
room heat up any faster. How quickly the room heats up depends on the design and size
of the oor heating system.
Similarly reducing the temperature setting does not aect how quickly the room cools
down. Setting a programmable room thermostat to a lower temperature will result in the
room being controlled at a lower temperature, and saves energy.
65
Slimline Series Model: PRT-E
1
Installation Procedure
This Slimline Series thermostat is designed to be ush mounted and requires a back
box of 35mm (minimum depth) to be sunk into the wall prior to installation.
Step 1
Carefully separate the front half of the thermostat from the back plate by placing a
small at head terminal driver into the slots on the bottom face of the thermostat.
Step 2
Place the thermostat front somewhere safe.
Terminate the thermostat as shown in the diagram on page 26 of this booklet.
Step 3
Screw the thermostat back plate securely into the back box.
Step 4
Clip the front of the thermostat back onto the thermostat back plate.
Do
Mount the thermostat at eye level.
Read the instructions fully so you get the best from our product.
Don’t
Do not install near to a direct heat source as this will aect functionality.
Do not push hard on the LCD screen as this may cause irreparable damage.
2
3 4
87
Slimline Series Model: PRT-E
1. Room/Floor Temp - Indicates the current temperature sensor mode.
2. Day Indicator - Displays the current day.
3. Frost Icon - Displayed when the thermostat is in frost protection mode.
4. Flame Icon - Displayed when the thermostat is calling for heat, the ame icon
will ash when the optimum start function is in operation.
5. Floor Temp Limit Icon - Displayed when the oor sensor probe has reached the
temperature limit set on feature 09.
6. Temperature Hold - When a Temp Hold is active, HOLD FOR and the remaining
time period is displayed.
7. Set - Indicates when changes are being made to programs or temperature set
points.
8. Holiday Indicator - Displayed when the thermostat is in holiday mode.
9. Current Temp - Indicates the current sensor temperature.
10. Program Cycle Indicator - Displayed during programming only to show which
period is being altered.
11. Keypad Lock Indicator - Displayed when the keypad is locked.
12. Units of Temperature - Degrees Celsius or Fahrenheit.
13. Clock - Digital clock display in 24h format.
LCD Display
1 2 346
7 8 9 10 11 12
13
5
109
Slimline Series Model: PRT-E
Setting the Clock
To set the clock, follow these steps.
• With the thermostat turned ON, press the Clock key twice ..................................
• Use the Up/Down keys to set the hours ..............................................................
• Press H to conrm settings ................................................................................................
• Use the Up/Down keys to set the minutes .........................................................
• Press H to conrm settings ...............................................................................................
• Use the Up/Down keys to set the day of the week ..........................................
• Press A to conrm settings and return to main display ..........................................
Day
Hours
Minutes
Operating Mode
The thermostat has 4 main operating modes:
Select the mode that best suits your needs
Mode 00 or 02 MUST NOT be used to control electric underoor heating, Mode 01 or 03
(default) with oor sensor option must be used.
• Press and hold the Power button to turn the thermostat OFF .........................
• Press and hold the H key for 10 seconds ...................................................................
• Use the Up/Down keys to select the mode you require .............................
• Press A to conrm settings .............................................................................................
• Press the Power button once to turn the thermostat back ON .........................
00
01
02
03
MODE
Non-programmable with air sensor only.
Non-programmable with oor / air sensor options.
Programmable with air sensor only.
Programmable with oor / air sensor options (default).
DESCRIPTION
1211
Slimline Series Model: PRT-E
Comfort Levels Explained
The thermostat provides Weekday/Weekend or 7 Day Programming options.
You should consult the“Optional Features” section to select the required mode.
The thermostat is supplied with comfort levels already programmed, but these can be
changed easily. The default times and temperatures are;
08.00 - 21°C (Wake) 09.30 - 16°C (Leave) 16.30 - 22°C (Return) 23.00 - 17°C (Sleep)
If you only want to use 2 levels, you should program the unused levels to --.--
Note: For Weekday/Weekend programming, the 4 comfort levels are the same for all
weekdays but can be dierent for the weekends.
For 7 Day programming, each day can have 4 dierent comfort levels.
• To program comfort levels, press Clock once ............................................................
For 7 Day programming,
only Mon is displayed
in the day indicator eld.
For Weekday/Weekend programming,
Mon Tue Wed Thu Fri
are displayed on screen.
Temperature Display
This thermostat can be setup to use an air sensor, oor sensor or both.
The display will clearly show which sensor is being controlled by showing either:
Note: Built in air sensor only MUST NOT be used to control electric underoor heating.
Floor sensor only or built in air & oor sensor together must be used.
When the thermostat is set to use both sensors, the room temperature will be displayed.
To view the oor temperature, press and hold the key until the Floor Temp is
displayed on screen.
Room Temperature Floor Temperature
1413
Slimline Series Model: PRT-E
Locking the Thermostat
The thermostat has a keypad lock facility. To activate the lock follow these steps.
• Press and hold the A and Down keys together for 10 seconds ..........
• You will see the lock symbol appear on screen .............................................
• To unlock, repeat the steps above until the lock symbol disappears.
Note: The keypad lock indicator is only displayed when the lock is active.
Keypad Lock Indicator
• Use the Up/Down keys to enter the required WAKE time .......................
• Press H to conrm settings ..........................................................................................
• Use the Up/Down keys to enter the required WAKE temperature .......
• Press H to conrm settings ..........................................................................................
• You will now see“LEAVE” displayed on screen.
• Repeat the programming steps for each period until complete.
• For unused periods enter --.-- and the thermostat will ignore the setting.
• Press A to conrm settings and return to main display ....................................
Note:
• In 7 Day programming mode you can repeat for each day independently.
• In Weekday/Weekend programming mode you will see Sat Sun displayed on
screen and can repeat for the weekend.
• To change the programming mode please refer to pages 21-23.
Comfort Levels Continued
1615
Slimline Series Model: PRT-E
Temperature Hold
The temperature hold function allows you to manually override the current operating
program and set a dierent temperature for a desired period.
• Press H to commence temperature hold ....................................................................
• Use the Up/Down keys to enter the required Hold time..............................
• Press H to conrm settings ..............................................................................................
• Use the Up/Down keys to enter the required Hold temperature..............
• Press A to conrm settings and return to main display ........................................
You will see the Hold For indication is displayed on screen.
The time will countdown the set duration and then revert to the normal program.
To cancel temperature hold, follow the same steps but reduce the Hold time to 00:00.
Hold ON Indicator
Hold Time Remaining
Temperature Control
The Up/Down keys allow you to adjust the set temperature .......................
When you press either key, you will see the word SET and the desired
temperature will be displayed on screen.
Use the Up/Down keys to adjust the SET value ..................................................
Press A to conrm settings and return to main display .............................................
Set Temperature
Set Icon
Note: This override will be maintained until the next programmed comfort level.
1817
Slimline Series Model: PRT-E
Pressing the Power button once will place the thermostat in frost protect mode.
In this mode, the thermostat will display the frost icon and will only turn the heating
on should the room temperature drop below the set frost temperature (see page 20).
Should the heating be turned on whilst in frost mode, the ame icon will be displayed.
To cancel the frost protect mode, press the Power button once again.
Frost Protection Mode Enabled
Frost Mode
Holiday
Holiday Days
Holiday ON Indicator
Note: A holiday period does not start until 00:00 the next day. For example, if you set
a holiday period on Friday for 2 days, Saturday will be counted as the rst day and the
thermostat will revert back to the programmed schedule at 00:00 on Monday.
The holiday function reduces the set temperature in your home to the frost
protection temperature setting (see page 23).
The thermostat will maintain this temperature for the duration of the holiday and will
then automatically return to the program mode on your return.
• Press H three times (until you see the suitcase on screen) .................................
• Use the Up/Down keys to enter the number of days holiday ...................
• Press A to conrm settings and return to main display .......................................
The display will show a suitcase indicating the thermostat is in holiday mode.
To cancel, follow the same steps but reduce the Holiday duration to 00 days.
Table des matières
Autres manuels Heatmiser Thermostat
Heatmiser
Heatmiser DT-ETS WiFi RF Manuel utilisateur
Heatmiser
Heatmiser DT-TS WiFi RF Manuel utilisateur
Heatmiser
Heatmiser DT-WTS1 Manuel utilisateur
Heatmiser
Heatmiser Touch Series Manuel utilisateur
Heatmiser
Heatmiser DS1-L Manuel utilisateur
Heatmiser
Heatmiser Slimline-E Manuel utilisateur
Heatmiser
Heatmiser PRT-R2 Manuel utilisateur
Heatmiser
Heatmiser JG PRT-E Manuel utilisateur
Heatmiser
Heatmiser edge Manuel utilisateur
Heatmiser
Heatmiser Touch Series Manuel utilisateur
Heatmiser
Heatmiser neoX Manuel utilisateur
Heatmiser
Heatmiser Wireless Series Manuel utilisateur
Heatmiser
Heatmiser UH8 Manuel utilisateur
Heatmiser
Heatmiser smartstat Manuel utilisateur
Heatmiser
Heatmiser NetMonitor V3 Manuel d'utilisation
Heatmiser
Heatmiser SLIMLINE Manuel utilisateur
Heatmiser
Heatmiser PRT-EW Manuel utilisateur
Heatmiser
Heatmiser Touchpad (TFT) Manuel utilisateur
Heatmiser
Heatmiser Slimline Series Manuel utilisateur
Heatmiser
Heatmiser TouchScreen Series Manuel utilisateur
Manuels Thermostat populaires d'autres marques
EWELLY
EWELLY EW-181 Manuel utilisateur
Prolon
Prolon T1100 Instructions d'installation
Computherm
Computherm Q20 Manuel utilisateur
Aube Technologies
Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur
Mars
Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur
Saswell
Saswell SAS920XWHB-7-S-RF Mode d’emploi
