Heatmiser DS1-E Manuel utilisateur

Wiring Diagram

RCD

MAINS SUPPLY

L N

MATTING OR WIRE

FLOOR PROBE

DS1-E

230VAC

Floor

Sensor

RT+ RT- N N L LOAD

The Heatmiser DS1-E dial type thermostat is designed

specically for electric underoor heating.

This thermostat incorporates the following functions;

• Adjustable Switching Dierential

• LED Heat and Power Indication

• 230v AC, 13A Switching

Want More Information?

Call our support team on:

+44 (0)1254 669090

Or view video specications

directly on our website:

www.heatmiser.com

Introduction 1

Model: DS1-E

IN ORDER TO AVOID ANY RISK OF ELECTRIC SHOCK, TURN OFF THE POWER TO THE

HEATING SYSTEM.

This dial thermostat is designed to be surface mounted.

1. Separate the front part of the thermostat by unscrewing securing screws on the

bottom face of the thermostat.

2. Mark 2 hole positions on the wall using the backplate as a positioning template. Drill at

the marked positions and insert a wall plug in to each hole.

3. Terminate the thermostat as per wiring diagram and screw the DS1-E back plate to the

back box.

4. Reconnect the thermostat front plate and insert the securing screws.

Installation

PDF FAQ

Rev 2.0

Wiring Diagram

RCD

MAINS SUPPLY

L N

MATTING OR WIRE

FLOOR PROBE

DS1-E

230VAC

Floor

Sensor

RT+ RT- N N L LOAD

The Heatmiser DS1-E dial type thermostat is designed

specically for electric underoor heating.

This thermostat incorporates the following functions;

• Adjustable Switching Dierential

• LED Heat and Power Indication

• 230v AC, 13A Switching

Want More Information?

Call our support team on:

+44 (0)1254 669090

Or view video specications

directly on our website:

www.heatmiser.com

Introduction 1

Model: DS1-E

IN ORDER TO AVOID ANY RISK OF ELECTRIC SHOCK, TURN OFF THE POWER TO THE

HEATING SYSTEM.

This dial thermostat is designed to be surface mounted.

1. Separate the front part of the thermostat by unscrewing securing screws on the

bottom face of the thermostat.

2. Mark 2 hole positions on the wall using the backplate as a positioning template. Drill at

the marked positions and insert a wall plug in to each hole.

3. Terminate the thermostat as per wiring diagram and screw the DS1-E back plate to the

back box.

4. Reconnect the thermostat front plate and insert the securing screws.

Installation

PDF FAQ

To change the set point, rotate the dial until it points at the desired temperature.

Setting The Temperature

The Heatmiser DS1-E oers 1, 2 and 3°C switching dierential.

With a 1°C switching dierential the heating will switch on 1°C below the set

temperature and will turn o when the set temperature is reached.

A 2°C will turn the heating on 2°C below the set temperature.

3°C will switch the heating on 3°C below the set temperature.

To set the dierential, set the DIP switches according to the table below.

This setting is only required when the sensor option is set to Air and Floor mode.

The setting is used to protect the oor surface from overheating.

The oor temperature limit can be set to 20, 28 or 40°C.

To set the required oor limit temperature, set the DIP switches according to the table.

Should the oor temperature be achieved (even if the room temperature has not achieved

the set temp) the heating will turn o. The Heat Active LED will ash in this case.

The thermostat has three modes of operation. Select the desired mode,

and set the DIP switches according to the table.

The DIP switches can be accessed from the back of thermostat.

Air Sensor: Uses the built in air sensor only.

Air Sensor & Floor Limiting Sensor: Uses the built in air sensor but also uses the

remote oor sensor to ensure the oor temperature doesn’t overheat.

Floor Sensor: Uses the remote oor sensor only.

Switching DierentialFloor Temperature Limit

Sensor Option

1 °C Switching

2 °C Switching

3 °C Switching

20°C

28°C

40°C

Air Sensor

Air & Floor

Floor Sensor

Switch 1 & 2 OFF

Switch 1 ON and Switch 2 OFF

Switch 1 OFF and Switch 2 ON

Switch 5 & 6 OFF

Switch 5 ON and Switch 6 OFF

Switch 5 OFF and Switch 6 ON

Switch 3 & 4 OFF

Switch 3 ON and Switch 4 OFF

Switch 3 OFF and Switch 4 ON

Autres manuels Heatmiser Thermostat

Heatmiser

Heatmiser DT-ETS WiFi RF Manuel utilisateur

Heatmiser

Heatmiser PRTHW-W Manuel utilisateur

Heatmiser

Heatmiser touch-n Manuel utilisateur

Heatmiser

Heatmiser PRT-EN1 Slimline Series Manuel utilisateur

Heatmiser

Heatmiser TM4-TS Manuel utilisateur

Heatmiser

Heatmiser PRT Manuel utilisateur

Heatmiser

Heatmiser DT-W Manuel utilisateur

Heatmiser

Heatmiser Wireless Series Manuel utilisateur

Heatmiser

Heatmiser HC Manuel utilisateur

Heatmiser

Heatmiser NetMonitor V3 Manuel d'utilisation

Heatmiser

Heatmiser Touch-HWN Manuel utilisateur

Heatmiser

Heatmiser Touch Series Manuel utilisateur

Heatmiser

Heatmiser PRT-W Manuel utilisateur

Heatmiser

Heatmiser PRT-EW Manuel utilisateur

Heatmiser

Heatmiser PRT-WTS Manuel utilisateur

Heatmiser

Heatmiser neoAir Manuel utilisateur

Heatmiser

Heatmiser neoUltra Manuel utilisateur

Heatmiser

Heatmiser Senior Manuel utilisateur

Heatmiser

Heatmiser UH8 Manuel utilisateur

Heatmiser

Heatmiser SP OpenTherm neoHub Mini OT Manuel utilisateur

Heatmiser

Heatmiser DT Manuel utilisateur

Heatmiser

Heatmiser PRT-TS Manuel utilisateur

Heatmiser

Heatmiser DS1-EL Manuel utilisateur

Heatmiser

Heatmiser UH6 Manuel utilisateur

Manuels Thermostat populaires d'autres marques

EWELLY

EWELLY EW-181 Manuel utilisateur

Prolon

Prolon T1100 Instructions d'installation

Computherm

Computherm Q20 Manuel utilisateur

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur

Saswell

Saswell SAS920XWHB-7-S-RF Mode d’emploi

Aircalo

Aircalo TFP1-ET85P2 Manuel utilisateur

Honeywell

Honeywell CM721 Manuel utilisateur

Carrier

Carrier DEBONAIR 33CS Manuel utilisateur

Lennox

Lennox iHarmony Zone Thermostat Instructions de montage

Gemtech

Gemtech GT7000 Mode d’emploi

Rollei

Rollei Smartes 45000 Manuel utilisateur

Sinope

Sinope TH1300RF Manuel utilisateur

Honeywell

Honeywell RLV4305 Manuel utilisateur

Honeywell

Honeywell Prestige 2.0 THX9421 Manuel utilisateur

NuTone

NuTone NTBZ48 Instructions d'utilisation d'origine

Stelpro

Stelpro MAESTRO ASMT402AD Manuel utilisateur

Honeywell

Honeywell T6811 Manuel utilisateur