Heatmiser TM1-TS WiFi RF Manuel utilisateur
1Model: TM1-TS / TM1-NTS
Model: TM1-TS / TM1-NTS
2Time Clock Series 2Model: TM1-TS / TM1-NTS
Table of Contents
1
2
3-4
5-6
7
8
9
10
10
11-12
13
14
15
16
17-18
19 - 21
22
Product Image
Table of Contents
Installation Procedure
LCD Display
Operating Modes
Setting the Operating Mode
Setting the Clock
Clean Screen
Locking the Time Clock
Programming 5/2 Day and 7 Day Time Clock Mode
Setting Countdown Mode
Time Clock Override
Holiday Programming
Factory Reset
Optional Features Explained
Wiring Diagrams
Notes
Model: TM1-TS / TM1-NTS
Time Clock Series
1
43 Time Clock Series Model: TM1-TS / TM1-NTS
1 2
3 4
Installation Procedure
This time clock is designed to be ush mounted and requires a back box of 35mm
(minimum depth) to be sunk into the wall prior to installation.
Step 1
Carefully separate the front half of the time clock from the back plate by placing a
small at head terminal driver into the slots on the bottom face of the time clock.
Step 2
Place the time clock front somewhere safe.
Terminate the time clock as shown in the diagrams on pages 19-21 of this booklet.
Step 3
Screw the time clock back plate securely into the back box.
Step 4
Clip the front of the time clock back onto the time clock back plate.
Do
Mount the time clock at eye level.
Read the instructions fully so you get the best from our product.
Don’t
Do not install near to a direct heat source as this will aect functionality.
Do not push hard on the LCD screen as this may cause irreparable damage.
14
32 5
11
1. Day Indicator - Displays the day.
2. Holiday Indicator - Displayed when the time clock is in Holiday mode.
3. Output Hold - Displayed when the time clock is in Hold mode.
4. Clock - Displays time in normal operation, time left in hold or days left in
holiday mode.
5. Up/Down Keys - Increase or decrease values shown on top digit group.
6. Keypad Lock Icon - Displayed when the keypad is locked.
7. ON/OFF Keys - Use to switch the hot water output. Press and hold OFF to turn the
display o.
8. Clean Screen - Freezes screen temporarily to enable cleaning.
9. Cancel - Used to exit setup/program operations.
10. Setup/Programming Keys - Used to navigate setup options.
11. Timer Status - Displays the current status of the timed output.
12. Comfort Level Selection Keys - Used in comfort level setup (see page 17).
LCD Display
8
10
12
6
9
7
65 Time Clock Series Model: TM1-TS / TM1-NTS
87 Time Clock Series Model: TM1-TS / TM1-NTS
Operating Modes
The time clock has three main operating modes.
The time clock can be used to control various electrical devices in and around your
home e.g. lighting, electric towel rails, hot tubs, sauna’s etc.
Refer to the manufacturer instructions for wiring to these devices.
Common time clock wiring requirements are shown in the diagrams
on pages 19 - 21.
00
01
02
MODE
5/2 Day Time Clock
In this mode, you can program 4 switching times for the weekdays
and 4 dierent switching times for the weekend.
7 Day Time Clock
In this mode, you can program 4 switching times for each day of
the week.
Countdown Timer
In this mode, the time clock will activate the output during the
countdown period.
DESCRIPTION
To select the mode, follow these steps.
•Press the PROG key .................................................................................................................
•Press the SETUP key ................................................................................................................
•Use the Up/Down keys at the top of the screen to select feature
number 12 .......................................................................................................................
•Use the Up/Down keys in the center to adjust the setting ...........................
00 = 5/2 Day, 01 = 7 Day, 02 = Countdown timer.
•Press DONE to conrm settings and exit .........................................................................
Setting the Operating Mode
Mode
Feature
109 Time Clock Series Model: TM1-TS / TM1-NTS
To set the clock, follow these steps.
•Press PROG ................................................................................................................
•Press CLOCK ..............................................................................................................
•Use the Down key to set the hours ..................................................................
•Use the Up key to set the minutes ...................................................................
•Use the Day key to set the day of the week ..................................................
•Press DONE to conrm and exit ........................................................................
Setting the Clock
Hours
Change Hours
Minutes
Day
Change Minutes
Locking the Keypad
The time clock has a keypad lock facility.
•To activate the lock press the bottom right corner of the display and hold for 10 secs.
•When activated, you will see the Keypad Lock symbol.
•To cancel, press the bottom right corner of the display again for 10 secs.
Clean Screen
Pressing will disable all keys, providing you 15 seconds to wipe the screen
clean before the keys are re-activated.
Keypad Lock Indicator
1211 Time Clock Series Model: TM1-TS / TM1-NTS
Programming 5/2 Day and 7 Day Modes •Use the Up/Down keys to set the OFF time for TIME 1 ..................
•Repeat these steps for the TIME 2, TIME 3 & TIME 4 ........................
•Press DAY to select the next day to program and repeat ..............
•When complete, press DONE to conrm settings and exit ............
In 5/2 Day mode the time clock will display
“Sat Sun” prompting you to program the
switching times for the weekend.
In 7 Day mode, the time clock
will display Tue.
Default switching times are pre-programmed but you can change them easily.
Weekday On Time O Time
Wake 07:00 09:00
Leave 16:00 20:00
Return --,-- --,--
Sleep --,-- --,--
Weekend On Time O Time
Wake 07:00 09:00
Leave 16:00 20:00
Return --,-- --,--
Sleep --,-- --,--
To set the switching times, follow these steps.
•Press PROG ............................................................................................................................
•Select TIME 1 .........................................................................................................................
•TIME 1 and ON will ash.
•Use the Up/Down keys to set the ON time for TIME 1 .....................................
•Press OFF ................................................................................................................................
1413 Time Clock Series Model: TM1-TS / TM1-NTS
Timer Override
The time clock is able to override its current timer status.
•Press HOLD ........................................................................................................................
•If the timer status is currently on press OFF ..........................................................
•If the timer status is currently o press ON ..........................................................
You will see the timer status change and ash to conrm it has been overridden.
The time clock will return to the program at the next programmed time.
To cancel the Override, repeat the steps above.
Countdown Mode
•Use the Up/Down keys to set the countdown duration ..........................
•Press DONE to conrm and exit ..............................................................................
•Hold Left will appear showing the time left.
When Hold Left is displayed on screen, the output will be active.
Hold Left Icon
Hold Time
Timer Status
(Flashes in Override)
ON/OFF keys
To cancel the Countdown, follow the same steps but reduce the time to 00:00.
1615 Time Clock Series Model: TM1-TS / TM1-NTS
All icons displayed simultaneously. Factory reset is complete.
The thermostat has a reset function to restore all settings to their factory defaults.
To perform a factory reset, follow these steps.
•Press & hold the OFF key to turn the thermostat display OFF ...............................
•Press and hold the bottom left corner of the LCD for 10 seconds.
•All of the screen icons will appear for 2 seconds and then disappear.
•Press the ON key once to turn the thermostat display back ON ...........................
Factory Reset
During a holiday, the time clock will maintain TIMER OFF.
At the end of your holiday, the time clock will revert back to the programmed setting.
•Press HOLIDAY ..............................................................................................
•Enter the desired duration in days ........................................................
•Press DONE to conrm and exit .............................................................
To cancel a Holiday setting, reduce the holiday time to 00 days.
Holiday
Note: A holiday period does not start until 00:00 the next day. For example, if you set a holiday
period on Friday for 2 days, Saturday will be counted as the rst day and the time clock will
revert back to the programmed schedule at 00:00 on Monday.
Holiday Icon
Holiday Days
1817 Time Clock Series Model: TM1-TS / TM1-NTS
To adjust the optional settings, follow these steps.
•Press PROG ...........................................................................................................................
•Press SETUP ..........................................................................................................................
•Use the Up/Down keys at the top of the screen to select the feature
number (shown on page 17) and then use the Up/Down keys in the
center to adjust the setting .........................................................................................
•Press DONE to conrm settings and exit ...................................................................
THE FOLLOWING SETTINGS ARE OPTIONAL AND IN MOST CASES
NEED NOT BE ADJUSTED
Feature 06 – Communications Address (TM1-NTS only): This setting is used when you
have connected your time clock to a network system. Each time clock on the network
must have a unique communication address. This can be set from 01-32.
Feature 12 - Programming Mode: This function allows you to select between 5/2 Mode,
7 Day mode or Countdown timer.
Optional Features Explained
06
12
FEATURE
Comms. Address
Programming Mode
DESCRIPTION
Enter number 01-32
00 = Weekday/Weekend (Default)
01 = 7 Day Programming
02 = Countdown mode
SETTING
Optional Settings - Feature Table
Adjusting the Optional Settings
Feature Number
Setting Value
Autres manuels pour TM1-TS WiFi RF
2
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Heatmiser Régulateurs de température
Manuels Régulateurs de température populaires d'autres marques
Swegon
Swegon LUNAd MB Manuel utilisateur
Lucky Reptile
Lucky Reptile Thermo Control II Manuel utilisateur
SENSORMETRIX
SENSORMETRIX Argon 100 Manuel utilisateur
Fuji Electric
Fuji Electric PXE4 Manuel utilisateur
Yuyao gongyi
Yuyao gongyi XMT-808 series Manuel utilisateur
Selec
Selec TC544C Manuel utilisateur
