Heath Zenith Notif Manuel utilisateur

alert

wireless plug-in doorbell

with smartphone notiﬁcations

Owner’s Manual

Thank You for Purchasing Notiﬁ™ Doorbell System

Welcome to Notiﬁ by HeathZenith. This manual will help setup the Notiﬁ system. Please read and understand this entire manual

before attempting to assemble, install, or operate the Notiﬁ system. For additional support and videos, go to

www.heath-zenith.com/notiﬁ.

IMPORTANT INFORMATION

• Minimum system requirement for the Notiﬁ app is iOS 9.0 or higher and Android 5.0 or higher.

Notiﬁ Alert Features

• Smart Phone Notiﬁcations

• Programmable Muting

Introduction

Table of Contents

INTRODUCTION .............................3

SETUP................................... 4-6

HOW TO USE ............................ 7-10

CARE AND CLEANING ......................10

FAQS .................................. 11-12

To maintain the compliance with the RF exposure guideline, place the base unit at least 7.875" (20 cm) from nearby persons.

CAUTION

Introduction

Speciﬁcations

Power Requirements:

Chime: 120 VAC, 60 Hz

Push Button: Type CR2032 3V battery (included)

Push Button Transmission Range: 100 feet

Volume: Adjustable

Number of Tunes: 11

Operating Temperature (Push Button): -13 to +120°F (-25°C to +50C)

Operating Temperature (Alert Chime):

Minimum System Requirements for the Notiﬁ App: iOS 9.0 or higher and Android 5.0 or higher, Broadband Internet

Connection with Home Wi-Fi®: Download speed is 3 MB/s and upload speed is 1 MB/s

You Will Need (not included)

• Password for your home network

• Broadband Internet connection with home Wi-Fi router

• Phillips screwdriver

• Flat-head screwdriver

Carton Inventory

Notiﬁ Alert Chime

Push Button

LED Indicator

Screws (#6 x 3/4") and Double-Sided Tape (for Push Button)

Setup

Remove the Notiﬁ Alert Push Button Battery Tab

To prevent possible SERIOUS INJURY or DEATH:

• NEVER allow small children near batteries.

• If battery is swallowed, immediately notify doctor.

1. Remove the backplate of the Notiﬁ Alert push button by pushing in tab on the bottom with a small ﬂathead screwdriver (not

included).

2. Remove the orange battery tab.

Install the Notiﬁ Alert Chime

1. Plug in the chime at the desired location. NOTE: It is recommended that the chime be plugged into the bottom wall

receptacle with the chime hanging below the receptacle as shown.

Setup

Test the Notiﬁ Alert Push Button and Chime

IMPORTANT: Do not permanently mount the push button until the push button and chime are working properly.

1. Temporarily position the push button where it will be mounted.

2. Press the push button to verify the chime and push button work correctly.

3. If the chime does not sound, move the chime closer to the push button and test again.

Install the Notiﬁ Alert Push Button

1. Secure the push button backplate to the door jamb or wall with screws or double-sided tape.

2. Slide the top of the Notiﬁ Alert push button cover down onto the backplate and press the bottom of the push button cover

against the backplate until it snaps onto the backplate.

DOUBLE-SIDED TAPE INSTALLSCREW INSTALL

Remove material in screw holes (if needed)

before mounting with screws.

Push Button

Cover

Push Button

Backplate

Setup

Download the Notiﬁ App

iOS Devices

Go to the App StoreSM and search for the “Notiﬁ Connected Products” app and download.

Android Devices

Go to the Google Play™ store and search for the “Notiﬁ Connected Products” app and download.

Setup the Notiﬁ App

IMPORTANT: Your home password will be required during this process.

1. On your mobile device, go to Settings > Wi-Fi. Select the “Notiﬁ Alert XXXX” (“XXXX” represents the unique MAC address

of each Notiﬁ Alert Chime) from the available Wi-Fi networks.

2. Once connected, open the Notiﬁ app. The app will detect your new Notiﬁ system.

3. Select “YES” to start the setup and the app will guide you through the remaining steps.

NOTE: Your username will be your email address. Your password must be a minimum of 8 characters or a maximum of 12

characters. Alpha numeric and/or special characters may be used.

IMPORTANT: The password must include at least 1 number, 1 upper case letter, 1 lower case letter, and 1 special character.

How to Use

Systems Tab

The Systems tab is the “home screen” for all of your Notiﬁ systems. From here you can access the following choices:

• Notiﬁ systems – The Systems tab lists all Notiﬁ systems available. Tap on the desired Notiﬁ system to view all connected

accessories.

• mute unmute – Selecting the “Mute” button will immediately mute your chime. Muting the chime from this location will

override any scheduled mute settings. Select “Unmute” to return to the scheduled mute settings.

• – Selecting the “Gear” icon next to a Notiﬁ system will allow you to adjust different settings for that Notiﬁ system.

• Add Notiﬁ System – At the bottom of the list of Notiﬁ systems is this selection. Tap on “Add Notiﬁ System” to learn how

to add additional systems to your Notiﬁ app.

• Logout – You may choose to logout of the Notiﬁ app if you want to log into another account. Also, once logged out, you will

be asked to log back in if you receive a notiﬁcation from a Notiﬁ system on this device.

• Need help? – Selecting this link will take you to the Notiﬁ FAQ website where you will have access to additional help features

as well as contacting HeathZenith technical service department (1-800-858-8501).

• i– Tap on this icon to access additional information about the Notiﬁ app.

Events

An event is created when the push button is pressed or an accessory is activated. To view an event, tap the Events tab.

Then tap the name of the Notiﬁ system you would like to view events for. The events will be listed chronologically.

To delete an event, swipe left across the event you wish to delete. Then tap the trashcan icon .

Notiﬁ Software Updates

Whenever a ﬁrmware update is available for a Notiﬁ product, the “gear” icon next to the applicable product on the

“Systems” screen will change to a download icon . This icon will remain on the screen until the ﬁrmware update has

been completed. NOTE: A reminder pop-up screen will also appear each time you log into the Notiﬁ app reminding you that a

ﬁrmware update is available. This pop-up screen will continue to appear until the ﬁrmware has been updated.

Alert LED Indicator

The Notiﬁ Alert has a LED indicator on the face of the chime. This LED indicator offers additional information as to the status of

the Notiﬁ Alert chime. See the FAQ section on page 12 for additional details.

Notiﬁcation Settings

> Feature Settings > Notiﬁcations

The notiﬁcations settings screen allows you to enable, schedule, and disable push notiﬁcations and email notiﬁcations.

IMPORTANT: With any setting changes make sure you press the Save button

Push to Talk

Back Events

View Live Feed

Save in the upper right corner if you want to keep

your changes.

How to Use

Mute Settings

> Feature Settings > Mute Settings

The Notiﬁ system allows you to mute your chime from within the Notiﬁ app. The mute settings allow you to schedule times

during the day when the chime should be muted. NOTE: Muting the chime does not disable notiﬁcations.

Default (2 Hour): Mutes the chime for a period of two hours from the time this selection is made. This selection may be turned

OFF at any time.

Weekday: Allows for a speciﬁc time during the day to be selected to mute the chime. The scheduled time is applied to all

selected days. This selection may be turned OFF at any time.

Weekend: Allows for quick scheduling of weekend only times when the chime is to be muted. This selection may be turned OFF

at any time.

IMPORTANT: The chime can be muted quickly from the Systems selection tab by selecting “Mute” under the selected Notiﬁ

system. Any scheduled mute settings will be overridden while the chime is muted from the Systems tab. Select “Unmute” to

return to the scheduled mute settings.

IMPORTANT: With any setting changes make sure you press the Save button

Push to Talk

Back Events

View Live Feed

Save in the upper right corner if you want to keep

your changes.

Volume Setting

> Feature Settings > Speaker Volume

The Notiﬁ Alert’s speaker volume can be adjusted by using the slide control at the bottom of the app screen.

System Name/Photo Icon

> Advanced Settings > System Name/Photo

The Notiﬁ systems on your account can be renamed at any time.

A photo can be added to represent each Notiﬁ system on your mobile device. The photo will be placed next to the selected Notiﬁ

system. NOTE: The photo is stored on the Notiﬁ server and will appear on any device logged into or sharing this account.

IMPORTANT: With any setting changes make sure you press the Save button

Push to Talk

Back Events

View Live Feed

Save in the upper right corner if you want to keep

your changes.

Add a Notiﬁ Accessory

> Advanced Settings > Add Notiﬁ Accessory

Up to 10 wireless accessories (sold separately) may be linked to your Notiﬁ Alert. Follow the instructions on the screen to

connect each new accessory.

Accessory Name/Photo Icon

Systems Tab > Notiﬁ System > Accessory* > > Accessory Name/Photo

* Tap the arrow next to the Notiﬁ system to show the Notiﬁ accessories connected to that system.

The Notiﬁ accessories on your account can be renamed at any time.

A photo can be added to represent each Notiﬁ accessory on your mobile device. The photo will be placed next to the selected

Notiﬁ accessory. NOTE: The photo is stored on the Notiﬁ server and will appear on any device logged into or sharing this

account.

IMPORTANT: With any setting changes make sure you press the Save button

Push to Talk

Back Events

View Live Feed

Save in the upper right corner if you want to keep

your changes.

Accessory Sounds

Systems Tab > Notiﬁ System > Accessory* > > Sounds

* Tap the arrow next to the Notiﬁ system to show the Notiﬁ accessories connected to that system.

The Notiﬁ Alert chime has eleven tunes available for each accessory. A unique sound can be assigned to each accessory.

Auld Lang Syne Beethoven’s Fifth Birthday Celebration

Ding-Dong Ding Relax Triplet

Short Westminster Shorty We Wish You A Merry Christmas

Westminster Whittington

Change the Notiﬁcations Email

> Account Settings > Update Email

Use this to change the email address where notiﬁcations will be received. NOTE: Changing this email address will not change

the Username email address used to log into your Notiﬁ account.

Change Account Password

> Account Settings > Update Password

Use this to change the password for your Notiﬁ account.

Multiple Guest Users

> Advanced Settings > Manage Multiple Users

The Notiﬁ system allows you to control multiple “guest” users within your account. These users will receive notiﬁcations when

the Notiﬁ Alert is activated. The “guest” users will not be able to access any of the Notiﬁ settings you have setup.

To add a “guest” user to your multiple user list, tap the “Add Viewers” button and type their email address in the “To:” ﬁeld, then

tap the “Send” button. The “guest” user will receive an email inviting them to view your system. They will need to download the

Notiﬁ app and create their own account before they are able to access your Notiﬁ system.

You can turn off their access to your Notiﬁ system at any time by tapping their username in the list. You can turn it back on by

tapping their username again.

How to Use

Guest users

CominG soon

How to Use

Care and Cleaning

Chime and Push Button

Use a dry cloth to clean the chime and push button. Do not use any ﬂuids on the chime or push button.

Deleting a Notiﬁ Accessory

Systems Tab > Notiﬁ System > Accessory* > > Delete Accessory

* Tap the arrow next to the Notiﬁ system to show the Notiﬁ accessories connected to that system.

This selection will delete the currently selected Notiﬁ accessory. To reconnect the accessory to a Notiﬁ system, go to “Add a

Notiﬁ Accessory”.

Deleting a Notiﬁ System

Systems Tab > Notiﬁ System

NOTE: When a Notiﬁ device has been physically damaged and is no longer working, this process will remove the system from

the Notiﬁ app.

• Slide the Notiﬁ system name on the Systems Tab to the left.

• Tap the trashcan icon to delete the system.

NOTE: Deleting a Notiﬁ system on the homepage does not reset the Notiﬁ Alert to the factory settings. If you want to move the

chime to a different account, see Factory Reset below.

Factory Reset

> Advanced Settings > Factory Reset

Reset the Notiﬁ Alert chime to the original factory settings if you want to move this Notiﬁ Alert to a different account.

When resetting the Notifi Alert chime:

• The Notifi Alert chime will be reset to factory settings and will no longer be connected to your Wi-Fi or the Notifi app.

• All events will be deleted from your account.

• All settings will be deleted.

• The Notifi Alert chime will be removed from your Heath/Zenith account.

NOTICE

Table des matières

Autres manuels Heath Zenith Accessoires

Heath Zenith

Heath Zenith Notifi elite Manuel utilisateur

Heath Zenith

Heath Zenith 5610 Manuel utilisateur

Heath Zenith

Heath Zenith Hardwired Electronic Chime 598-1113-05 Manuel utilisateur

Heath Zenith

Heath Zenith 5838 Manuel utilisateur

Heath Zenith

Heath Zenith Wireless Chime 598-1172-04 Manuel utilisateur

Heath Zenith

Heath Zenith Decorative Wireless Chime 598-1000-07 Manuel utilisateur

Heath Zenith

Heath Zenith SL-6143 Manuel utilisateur

Heath Zenith

Heath Zenith 7306 Manuel utilisateur

Heath Zenith

Heath Zenith Wireless Chime 6153/62/71/72 Manuel utilisateur

Heath Zenith

Heath Zenith 7750 Manuel utilisateur

Heath Zenith

Heath Zenith 6180 Series Manuel utilisateur

Heath Zenith

Heath Zenith 5316 Manuel utilisateur

Heath Zenith

Heath Zenith Wireless Push Button Accessory 598-1105-06 Manuel utilisateur

Heath Zenith

Heath Zenith 7868 Manuel utilisateur

Heath Zenith

Heath Zenith 7797 Manuel utilisateur

Heath Zenith

Heath Zenith 121AC Manuel utilisateur

Heath Zenith

Heath Zenith Wireless Push Button Accessory 598-1151-02 Manuel utilisateur

Heath Zenith

Heath Zenith Weatherproof Long Range Wireless Chime with Chime Extender... Manuel utilisateur

Heath Zenith

Heath Zenith 595-5707-06 Manuel utilisateur

Heath Zenith

Heath Zenith DUAL BRITE SL-5597 Manuel utilisateur

Heath Zenith

Heath Zenith DESA 6270 Manuel utilisateur

Heath Zenith

Heath Zenith Wireless Push Button Accessory 598-1105-05 Manuel utilisateur

Heath Zenith

Heath Zenith Lighted Wireless Push Button Accessory Manuel utilisateur

Heath Zenith

Heath Zenith DualBrite Replacement Sensor Head 2LBN3 Manuel de service

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur