Haws 3511FR Mode d’emploi

10/18 Model 3511FR Page 1 of 4

1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424

E-mail: [email protected] website: www.hawsco.com

Model 3511FR

Drinking Fountain

INSTALLATION, OPERATION

MAINTENANCE INSTRUCTIONS

No. 2077369 (11)

LIMITED WARRANTY

HAWS warrants that this specific product is guaranteed against defective material

or poor workmanship for a period of one year from date of shipment. HAWS

liability under this warranty shall be discharged by furnishing without charge F.O.B.

HAWS Factory any goods, or part thereof, which shall appear to the Company upon

inspection to be of defective material or not of first class workmanship, provided that

claim is made in writing to Haws within a reasonable period after receipt of the

product. Where claims for defects are made, the defective part or parts shall be

delivered to the Company, prepaid, for inspection. HAWS will not be liable for the

cost of repairs, alterations or replacements, or for any expense connected therewith

made by the owner or his agents, except upon written authority from HAWS,

Sparks, Nevada. HAWS will not be liable for any damages caused by defective

materials or poor workmanship, except for replacements, as provided above. Buyer

agrees that HAWS shall not be liable for general, special, or consequential

damages claimed to arise under the contract of sale. The drinking fountain

manufactured by HAWS is warranted to function if installation and maintenance

instructions provided are adhered to. The units also must be used for the purpose

for which they were intended.

NO OTHER WARRANTIES EXPRESSED OR IMPLIED ARE AUTHORIZED,

PROVIDED OR GIVEN BY HAWS.

NOTE TO INSTALLER: Please leave this information with the Maintenance Department.

SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS

MODEL PLEASE CALL:

TECHNICAL SUPPORT: 1-800-766-5612

FOR CUSTOMER SERVICE: 1-888-640-4297

10/18 Model 3511FR Page 2 of 4

RECOMMENDED TOOLS: Hack saw, pipe joint sealant, screwdriver, level, 12"

adjustable wrench, 10" pipe wrench, 9/16”, 1/2”, 7/16” socket wrench or open end

wrench, 5/32” hex key wrench.

LOCATION OF UNIT: The Model 3511FR Drinking Fountain is a wheelchair

accessible drinking water facility. The height dimensions shown meet current ADA

requirements. When installing this unit, local, state or federal codes should be

adhered to. If height other than shown is required, then dimensions must be adjusted

accordingly.

SUPPLY LINE: The minimum recommended line size is 1/2“ IPS with 30-90 psi (2-6

ATM) flowing pressure. Where sediment or mineral content is a problem, an inlet filter

is recommended.

PLUMBING CONNECTIONS: Waste outlet is male 1-1/2” O.D. tailpiece.

MAINTENANCE: Refer to 6518.2FR Operation and Maintenance Sheet for more

information.

TROUBLESHOOTING

PROBLEM

REPAIR CHECKLIST

Insufficient bubbler flow.

1a.

Check that inlet screwdriver stop

valve is wide open. (Customer

supplied)

Verify minimum 30 psi flowing

supply pressure.

Adjust valve to increase flow. See

6518.2FR Manual.

Clean screens (inside nozzle body).

Unscrew nozzle insert and very

gently activate water supply to pop

out qty. 3 screens (be careful not to

lose screens). Remove any debris

clogging the screen openings and

place back into nozzle body.

Reassemble nozzle insert.

General Notes:

Before tightening nut and ferrule assembly, push tubing into fitting until it bottoms out to

ensure correct engagement with O-Ring.

For more information about Haws products, see our website: www.hawsco.com

HAWS® and other trademarks usedin these materials are the exclusive property of Haws Corporation.

6518.2FR

VALVE

VALVE BOX

(NOT SUPPLIED)

5881PBA

PUSH BUTTON

ASSEMBLY

5705

BUBBLER HEAD

0005624292

STRAINER

STYLE B

(TUBING CONNECTS TO

INSERT ASSY)

FOUNTAIN COULD HAVE EITHER STYLE

STYLE A

(TUBING CONNECTS

TO ELBOW)

DETAIL A

(OPTIONAL)

FOR REMOVAL

OF NOZZLE

WITH TUBE

0002082253

PARTS BREAKDOWN

APPROVED

DRAWN

PART NUMBER

SCALE: SHEET OF

REVISION

DRAWING TYPE: SIZE: A

BYECN NO.

PAGE

DATE

ECN:

REVISED PER

CHKD

HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.

MODEL(S)

1455 KLEPPE LANE

SPARKS, NEVADA 89431

(775) 359-4712 FAX (775) 359-7424

E-MAIL: HAWS@HAWSCO.COM

WEBSITE: WWW.HAWSCO.COM

THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS

MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.

WHEN ORDERING PARTS PLEASE SPECIFY MODEL NUMBER.

P. McMULLEN

05/09/00

0002077369

3511FR

10/23/18

3 OF 4

PARTS BREAKDOWN

5362

2018

5705LAMIN

(OBSOLETE -

SHOWN FOR

REFERENCE

ONLY.)

ENSURE TUBE IS DISCONNECTED FROM "PUSH-IN" TYPE

CONNECTOR ON PRESSURE REGULATOR PRIOR TO

REMOVAL. APPLY A DROP OF LOCTITE 222MS ON

NOZZLE THREADS PRIOR TO REASSEMBLING BACK

ONTO BUBBLER HEAD. REATTACH TUBE TO "PUSH-IN"

TYPE CONNECTOR ENSURING IT IS FULLY BOTTOMED

OUT.

NOTE:

6518.2FRVALVEASSY

GROUNDLEVEL

CONCRETEANCHORS

BURYDEPTHSOF48"[1219mm]AND72"

MINIMUMTOAPOROUSGRAVELFILLOR

MAINSEWERLINELOCATEDBELOW

Ø127mm

[1829mm]. WASTE TO BE 1-1/4" IPS

FROST LINE (NOT SUPPLIED).

4X 1/2"-13 UNC

152mm

(NOT SUPPLIED)

30" SQUARE

CONCRETE SLAB

76mm

MTG BOLTS 4X

248mm

MOUNTINGDETAIL

1016mm

(TO SPOUT OUTLET)

40"

(SUPPLIED)

1 1/2" O.D. TAILPIECE

9 3/4"

248mm

(SUPPLIED)

IN CONCRETE SLAB

1/2" ANCHOR BOLTS

MOUNTING SLOTS FOR

1/2"-13 UNC

(TO SPOUT OUTLET)

76mm

686mm

27"

746mm

29 3/8"

18"

457mm

914mm

36"

14 1/8"

359mm

DISCONNECT COUPLING TO

REPLACE BUBBLER HEAD

APPROVED:

DRAWN:

PART NUMBER

SCALE: SHEET OF

REVISION

DRAWING TYPE: SIZE: A

BY:ECN NO.

PAGE

DATE:

ECN:

REVISED PER

CHK'D.:

MODEL(S)

1455 KLEPPE LANE

SPARKS, NEVADA 89431

(775) 359-4712 FAX (775) 359-7424

E-MAIL: [email protected]

WEBSITE: WWW.HAWSCO.COM

THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS

MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.

05/08/00

0002077369.D

3511FR

1:14

10/23/18

4 OF 4

INSTALLATION

5362

2018

VALVE BOX

(NOT SUPPLIED)

Manuels Fontaine extérieure populaires d'autres marques

Sunnydaze Decor

Sunnydaze Decor XSS-578 Manuel utilisateur

Campania International

Campania International Bibendum FT-400 Manuel utilisateur

Elkay

Elkay FLEXI-GUARD EFHA8 1M Series Manuel d'installation

S.R.Smith

S.R.Smith Color Light Stream 2CLSLBK Manuel utilisateur

Hozelock Cyprio

Hozelock Cyprio Cascade 1500 Manuel utilisateur

Campania International

Campania International Juliet Fountain Manuel utilisateur

YARDART

YARDART FT-155 Manuel utilisateur

Alpine

Alpine WIN732 Manuel utilisateur

Campania

Campania Valencia Manuel utilisateur

Campania International

Campania International FT-320 Manuel utilisateur

GardenWize

GardenWize SWGSL230 Manuel utilisateur

Kelkay

Kelkay Easy Fountain Rustic Windmill Manuel utilisateur

Alpine

Alpine WIN258 Manuel utilisateur

Bond

Bond Signature Series Manuel utilisateur

Kenroy Home

Kenroy Home 51112COPBL Guide d'installation

EasyPro

EasyPro Tranquil Décor HBB39 Manuel utilisateur

Angelo Decor

Angelo Decor Castillo Manuel utilisateur

Campania International

Campania International Girona FT-102A Manuel utilisateur