Havis-Shields Silver Billet Telescoping Computer Mounts C-PED... Guide de configuration

INSTALL INSTRUCTIONS C-PED SERIES

(C-PED1612-W2 or C-PED1612-W4)

SILVER BILLET™ TELESCOPING COMPUTER MOUNTS

C-PED1612-W2 Silver Billet Telescoping Computer Pedestal with 2” Offset Bracket

C-PED1612-W4 Silver Billet Telescoping Computer Pedestal with 4” Offset Bracket

TOOLS REQUIRED:

Ratcheting wrench

Socket set

Powered drill

Drill bit set

Screwdriver set

Standard Allen key set

HARDWARE:

QTY DESCRIPTION PART #

1 White Teflon washer CM93081

7 ¼-20 x ¾” Phillips machine screw GSM33124

3 ¼-20 Thin Nylock nut GSM30016-1

7 ¼” Flat washer GSM31005

4 ¼” Lock washer GSM31026

4 5/16” x 1” Hex head lag bolt GSM34203

Always!

 Read all instructions before installing any Havis-Shields Equipment Corp products.

 Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!

 Use hardware provided with install kit

C-PED-SERIES-INST-9-06

1. SUBASSEMBLY:

• Determine location in vehicle where you can obtain a side and floor mount.

• Be sure that determined locations would accept mounting bolts and screws without

interference to other controls, wires, etc.

2. INSTALLATION

• The C-PED Series mounts to a horizontal flat surface as well as a vertical flat surface.

Determine location to obtain both.

• With offset bracket positioned against flat surface, (i.e., console, divider wall, etc.),

mark and drill 5/16” hole at location of bolt on offset bracket.

• Bolt offset bracket to “flat surface” using a fender washer and 5/16” nut.

• Bolt C-PED1612 to floor of vehicle using ¼” x 1” –1 ½” hex head lag bolts,

depending on particular vehicle application.

• Mount optional laptop mounts (C-3090 series), monitor mounts (C-3522), keyboard

mounts (C-3329) or tilt swivels (C-3075 series) (optional - order separately) using ¼-

20 x ¾” bolts, washers, and nylock nuts.

Optional Mounting Base

C-PED-PLT shown

(Mounts to floor)

Computer mount

platform

Adjust lever

Offset bracket

C-PED1612-W4 shown

suppo

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Havis-Shields Support et étagère

Havis-Shields

Havis-Shields Heavy Duty Trak Mount C-TM-EXC Guide de configuration

Havis-Shields

Havis-Shields Universal Side Mount C-TCB-19 Guide de configuration

Havis-Shields

Havis-Shields S-UMM-AMR-MTX Manuel utilisateur

Havis-Shields

Havis-Shields Heavy Duty Telescoping Computer Mounts... Manuel utilisateur

Havis-Shields

Havis-Shields C-3330-800 MW-800 Guide de configuration

Havis-Shields

Havis-Shields Trunk Side Mount C-TSM-CHGR-X Manuel utilisateur

Havis-Shields

Havis-Shields Heavy Duty Trak Mount C-TM-GMC Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur