HAUPA GmbH & Co. KG, Königstraße 165-169, D-42853 Remscheid,
Tel.: +49 (0) 2191 8418-0. Fax: +49 (0) 2191 8418840, E-Mail: sales@haupa.com. Subject to technical changes and printing errors.
... convincing solutions
english
6. Care and maintenance
Cleaning:
• Careful cleaning of the tool, in particular, the moving parts contributes towards a longer
useful life. Remember that dust, sand, environmental influences, in particular a high salt
index, and dirt in general are extremely damaging to hydraulic tools.
• Particular care should be taken when cleaning the pump drive piston and the piston.
The tiniest of contaminations may scratch the walls of the cylinder and damage the
leak-proof seals. For the correct cleaning of the piston, we recommend extending the
piston and then cleaning it with a high-quality, non-corrosive solution.
Power switch:
Check to see whether the switch on the machine automatically pops out again when you
release it.
Storage:
To prevent damage to the tool as a result of bumps, dust etc. you should if possible store the
tools in the original packaging.
Warranty:
2 year warranty when used for the purpose it is intended when the annual maintenance
intervals are maintained by an authorised HAUPA service centre. We reserve the right to
rework the product.
Faults:
Loss of oil:
Send to the HAUPA service centre. Do not open!
Disposal:
…in accordance with the scope of validity of the European WEEE (2012/19/EU) and RoHS
directives (2011/65/EU). Batteries must be disposed off separating according to the battery
directive.
WITH EVERY REPLACEMENT PART ORDER, INCLUDE THE FOLLOWING INFORMATION:
1) Article number.
2) Article description.
3) Reference to the operating instructions and/or date.
4) Tool type.
5) Serial number of the tool.
The warranty is voided if you use parts that are not original replacement parts from HAUPA.
