HAUL MASTER 95408 Manuel utilisateur

Model 95408

ASSEMBLY AND OPERATING INSTRUCTIONS

TO PREVENT SERIOUS INJURY,

READ AND UNDERSTAND ALL WARNINGS

AND INSTRUCTIONS BEFORE USE.

Due to continuing improvements, actual product may differ slightly from the product described herein.

For technical questions, please call 1-800-444-3353.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at: http://www.harborfreight.com

manual or any artwork contained herein may be reproduced in any shape or form

without the express written consent of Harbor Freight Tools.

PINTLE HOOK

5 TON CAPACITY

PRODUCT SPECIFICATIONS

SAVE THIS MANUAL

You will need this manual for the safety warnings and precautions, assembly, operating,

inspection, maintenance and cleaning procedures, parts list and assembly diagram.

Keep your invoice with this manual. Write the invoice number on the inside of the front

cover. Keep this manual and invoice in a safe and dry place for future reference.

GENERAL SAFETY RULES

IMPORTANT SAFETY INSTRUCTIONS

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow all instructions detailed in this manual may

result in serious personal injury.

SAVE THESE INSTRUCTIONS

SKU 95408 For technical questions, please call 1-800-444-3353 PAGE 2

1. Keep your work area clean and well lit. Cluttered and dark work areas invite

accidents.

2. Stay alert. Watch what you are doing, and use common sense when operating

tools and equipment. Do not assemble or use this product while tired or under

the influence of drugs, alcohol, or medication. A moment of inattention while

operating tools and equipment may result in serious personal injury.

3. Wear eye protection. Wear ANSI-approved safety impact goggles when

asembling this product.

Product

Compatibility

For Use With:

Harbor Freight Tools Model 95407 Pintle Mount (Sold Separately)

Maximum

Weight Capacity

5 Tons (10,000 Lbs.)

Material Forged Alloy Steel / Alloy Steel Fasteners

Dimensions 6” Horizontal Length (Front to Back) / 5-7/8” Highest Point

Mounting

Surface

3-1/4” x 4-1/2”

Net Weight 8.3 Pounds

SKU 95408 For technical questions, please call 1-800-444-3353 PAGE 3

5. Check for any condition that may negatively affect the Pintle Hook’s

operation. If damaged, have the Hook replaced before using. Do not use

damaged products. Tag damaged products “Do not use” until repaired.

6. This Pintle Hook is designed for use

only

with Harbor Freight Tool’s Model

95407 Pintle Mount.

10. Product service must be performed only by qualified service technician.

Service or maintenance performed by unqualified personnel could result in

a risk of injury.

11. When servicing the Pintle Hook, use only identical replacement parts.

Follow instructions in the

“Inspection, Maintenance, And Cleaning”

section of this

manual. Use of unauthorized parts or failure to follow maintenance instructions

7. Industrial applications must follow OSHA requirements.

8. Maintain labels and nameplates on the Pintle Hook. These carry important

information. If unreadable or missing, contact Harbor Freight Tools for a replace-

ment.

9. Use the right product for the job. There are certain applications for which this

product was designed. Do not use small products to do the work of larger indus-

trial products. Do not use this product for a purpose for which it was not in-

tended.

may create a risk of personal injury.

12. Do not allow children to play with this product.

13. Prior to using this product, make sure to read and understand all instruc-

tions and safety precautions as outlined in the service manuals for the

towing vehicle and trailer (or object) being towed. Make sure the towing

vehicle is capable of towing the trailer and its payload. Make sure the hitch

receiver on the towing vehicle is capable of towing the trailer and its payload.

The towing capacity of the hitch receiver is typically stamped on the receiver.

4. Do not force the Pintle Hook. Use the correct product for your application.

The correct product will do the job better and safer at the rate for which it is

designed. NEVER attempt to exceed the maximum weight capacity of the

Pintle Hook (5 Tons).

14. WARNING! The Bolts, Lock Washers, and Nuts (not included) used to

mount the Pintle Hook to the Pintle Mount (not included) MUST be rated a

minimum Grade #8 hardness. Do not attempt to use lesser grade mounting

hardware.

SKU 95408 For technical questions, please call 1-800-444-3353 PAGE 4

stood by the operator that common sense and caution are factors which cannot

be built into this product, but must be supplied by the operator.

UNPACKING

When unpacking, check to make sure all the parts shown in the Parts List on page 6

are included. If any parts are missing or broken, please call Harbor Freight Tools at the

number shown on the front cover of this manual as soon as possible.

ASSEMBLY INSTRUCTIONS

To Attach The Pintle Hook To A Pintle Mount:

15. WARNING! The warnings and cautions discussed in this manual cannot

cover all possible conditions and situations that may occur. It must be under-

1. NOTE: The Pintle Hook is designed

only

for use with the Harbor Freight Tools

Model 95407 Pintle Mount (sold separately). (See Figure A.)

2. The Pintle Mount is designed to allow for adjusting the height of the mounted

Pintle Hook. To adjust the height, align the four mounting holes in the Pintle

Hook with either the four top mounting holes in the Pintle Mount or the four

bottom holes in the Pintle Mount. (See Figure A.)

3. Once the height of the Pintle Hook is determined, secure the Pintle Hook to the

Pintle Mount, using the four Grade #8 Bolts, four Lock Washers, and four Nuts

provided with the Pintle Mount. CAUTION: Make sure the four Nuts are

firmly

tightened onto the four Bolts. (See Figure A.)

MODEL 95407

PINTLE MOUNT

(NOT INCLUDED)

MOUNTING

HOLES

END VIEW

FOR HIGHER MOUNTING

OF PINTLE HOOK

FOR LOWER MOUNTING

OF PINTLE HOOK

VEHICLE HITCH RECEIVER

BOLTS, LOCK WASHERS, NUTS

SIDE VIEW

MODEL 95407

PINTLE MOUNT

(NOT INCLUDED)

WARNING!

THE FOUR BOLTS, LOCK WASHERS, AND NUTS

USED TO ATTACH THE PINTLE HOOK TO THE PINTLE MOUNT

MUST BE RATED A MINIMUM GRADE #8.

FIGURE A

SKU 95408 For technical questions, please call 1-800-444-3353 PAGE 5

To Attach The Pintle Mount And Pintle Hook To A Vehicle’s Hitch Receiver:

1. Insert the Pintle Mount into a 2” x 2” vehicle hitch receiver (not included).

(See Figure A.)

2. Align the hitch pin hole in the Pintle Mount with the hitch pin hole in the vehicle

hitch receiver. (See Figure A.)

3. Secure the Pintle Mount and Pintle Hook to the vehicle hitch receiver by inserting

a hitch pin (not included) through the hitch pin holes of the Pintle Mount and

vehicle hitch receiver. Then, insert a safety pin (not included) through the open-

ing in the hitch pin. (See Figure A.)

OPERATNG INSTRUCTIONS

1. Open the Latch (1) by removing the Safety Pin (2) and Lifting Lock (3).

(See Figure B.)

2. Position the trailer’s drawbar eye (not included) over the Horn (4) of the Pintle

Hook and lower into place. (See Figure B.)

3. Push the Latch (1) closed, lower the Lifting Lock (3) and insert the Safety Pin

(2). (See Figure B.)

HORN (4)

LATCH (1) LIFTING LOCK (3)

SAFETY PIN (2)

FIGURE B

INSPECTION, MAINTENANCE, AND CLEANING

1. CAUTION! Make sure to wear ANSI-approved safety impact goggles be-

fore performing any inspection, maintenance, or cleaning of the Pintle Hook.

2. Before each use: Inspect the general condition of the Pintle Hook. Check for

damaged or loose parts, and any other condition that may affect this product’s

safe operation. If a problem occurs, have the problem corrected before further

use. Do not use damaged equipment.

3. To clean: Use a clean, soft, damp cloth, and mild detergent. Do not use sol-

vents.

4. CAUTION! All maintenance, service, and repairs not discussed in this

manual should only be performed by a qualified service technician.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY

DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR

DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT

HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFAC-

TURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACE-

MENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY

THE BUYER. THE BUYER ASSUMES ALL RISKS AND LIABILITY ARISING OUT OF HIS OR HER

REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF

HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

PARTS LIST AND ASSEMBLY DIAGRAM

NOTE:

Some parts are listed and shown for illustration purposes only,

and are not available individually as replacement parts.

Part # Description Qty.

1 Latch 1

2 Safety Pin 1

3 Lifting Lock 1

4 Horn 1

SKU 95408 For technical questions, please call 1-800-444-3353 PAGE 6

Harbor Freight Tools Co.makes every effort to assure that its products meet high quality and durability standards,

and warrants to the original purchaser that this product is free from defects in materials and workmanship for

the period of ninety days from the date of purchase. This warranty does not apply to damage due directly or

indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, or to lack of

maintenance.We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent,

special or consequential damages arising from the use of our product. Some states do not allow the exclusion or

limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS

WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid.

Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection

veriﬁes the defect, we will either repair or replace the product at our election or we may elect to refund the purchase

price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our

expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of

our warranty, then you must bear the cost of returning the product.

This warranty gives you speciﬁc legal rights and you may also have other rights which vary from state to state.

3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353

LIMITED 90 DAY

WARRANTY

SKU 95408 For technical questions, please call 1-800-444-3353 PAGE 7

Table des matières

Autres manuels HAUL MASTER Accessoires automobiles

HAUL MASTER

HAUL MASTER 92655 Instructions de montage

HAUL MASTER

HAUL MASTER 67623 Instructions de montage

HAUL MASTER

HAUL MASTER 96349 Manuel d'installation

HAUL MASTER

HAUL MASTER 90018 Instructions de montage

HAUL MASTER

HAUL MASTER 66983 Instructions de montage

HAUL MASTER

HAUL MASTER 94795 Guide de référence rapide

HAUL MASTER

HAUL MASTER 98239 Manuel d'installation

HAUL MASTER

HAUL MASTER HAUL MASTER 98511 Manuel utilisateur

HAUL MASTER

HAUL MASTER 96811 Manuel d'installation

HAUL MASTER

HAUL MASTER 63772 Instructions de montage

HAUL MASTER

HAUL MASTER 500 LB. CAPACITY KNOCKDOWN CARGO CARRIER Manuel d'installation

HAUL MASTER

HAUL MASTER 96711 Manuel

HAUL MASTER

HAUL MASTER 58114 Instructions de montage

HAUL MASTER

HAUL MASTER 96658 Manuel

HAUL MASTER

HAUL MASTER 94137 Manuel utilisateur

HAUL MASTER

HAUL MASTER 94643 Manuel de la liste des pièces

HAUL MASTER

HAUL MASTER 96279 Manuel de la liste des pièces

HAUL MASTER

HAUL MASTER 69650 Instructions de montage

HAUL MASTER

HAUL MASTER 95974 Manuel de la liste des pièces

HAUL MASTER

HAUL MASTER 92655 Manuel d'installation

HAUL MASTER

HAUL MASTER 63924 Instructions de montage

HAUL MASTER

HAUL MASTER 96198 Manuel utilisateur

HAUL MASTER

HAUL MASTER 34313 Manuel utilisateur

HAUL MASTER

HAUL MASTER 90018 Manuel de la liste des pièces

Manuels Accessoires automobiles populaires d'autres marques

James Baroud

James Baroud Odyssey Manuel utilisateur

Motorola

Motorola i50sx Manuel utilisateur

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuel utilisateur

Feniex

Feniex T3 Manuel utilisateur

Renault

Renault 77 11 423 180 Manuel utilisateur

Kia

Kia E8300-4D000 Manuel utilisateur

Brink

Brink 756843 Manuel utilisateur

Whispbar

Whispbar K085W Manuel utilisateur

v.link

v.link CI-VL2-PC-HSD Manuel utilisateur

Viking

Viking Stack-Rack Guide de configuration rapide

Aries

Aries 203015 Manuel utilisateur

Choetech

Choetech AT0005 Manuel utilisateur

ZZ2

ZZ2 ZZAIR-PRO Manuel utilisateur

Holman

Holman 4A80L Manuel utilisateur

Thule

Thule 2075 Manuel utilisateur

Motorola

Motorola T325 Manuel utilisateur

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guide d'installation

DV8

DV8 FBJL-02 Manuel utilisateur