Harman Kardon Aura Manuel utilisateur

Aura

Wireless Speaker System

Owner’s Manual

Table of Contents

Aura

INTRODUCTION 3

INCLUDED ITEMS 3

CONTROLS AND CONNECTIONS 3

HARMAN KARDON AURA FRONT PANEL CONTROLS 3

HARMAN KARDON AURA REAR PANEL CONTROLS 4

CONNECTIONS 4

POWER CONNECTIONS 4

SOURCE CONNECTIONS 4

IOS WIRELESS WIFI SHARING 5

IOS WIFI SHARING WITH CABLE 5

ADHOC MODE 6

OPERATION 6

SWITCHING TO DIFFERENT POWER MODES 6

ADJUSTING VOLUME 7

PLAYING MUSIC THROUGH WIFI 7

PLAYING MUSIC THROUGH BLUETOOTH 7

PLAYING MUSIC THROUGH AIRPLAY® 7

HARMAN KARDON REMOTE 7

HARMAN KARDON AURA LED INDICATION TABLE 8

HARMAN KARDON AURA LED RING PATTERN INDICATION 9

TROUBLESHOOTING 10

SPECIFICATIONS 11

Introduction

Aura

Introduction

Thank you for purchasing the Harman Kardon Aura. Harman Kardon Aura is a premium,

iconic design, wireless speaker that allows you to stream music from any smart phone,

tablet or other wireless devices through Bluetooth®, AUX,Wi-Fi, AirPlay®, and DLNA®.

We at Harman Kardon always aim to create new products with high level functionality,

beautiful design, and amazing sound quality.

Harman Kardon Aura is a 7-speaker, advanced acoustic platform that delivers a truly

fantastic sound experience with a balanced soundstage and powerful bass response.

The Harman Kardon Remote app simplifies the setup and lets you stream all your

audio content. With its simple setup and quality sound, the Harman Kardon Aura is an

essential audio component for every house.

browse www.harmankardon.com for regional contact details.

Included Items

Harman Kardon Aura speaker system consists of the following accessories:

• Harman Kardon Aura speaker

• One AC power adapter

• Regional power cord (varies depending on countries)

IMPORTANT: If any included accessory is missing, or if any part of your HK

Aura system fails to operate properly, contact your dealer immediately.

Controls and Connections

This section will help you identify the controls and connections that are provided on the

Aura side and rear panels.

Harman Kardon Aura Front Panel Controls

The following control buttons are available on the front panel of the HK Aura:

1. Source

2. ON/OFF

3. Wi-Fi

4. Volume control

123

Aura Connections

Source: Use the Source button to switch between the sources as required.

• Press the source button for 0.5 seconds to change the source from

Bluetooth/Optical/Aux-in.

• Press the source button for more than 2.5 seconds to disconnect all the

Bluetooth connections and switch to Bluetooth source.

ON/OFF: This button turns the Harman Kardon Aura ON and OFF. Press and hold this

button for more than 2.5 seconds to put the unit into Standby mode. Press the button

again to bring it back to Operational mode.

NOTE: Harman Kardon Aura gives out a sound prompt when the system

wakes up from the Standby mode, and when the power is turned OFF.

Wi-Fi: This button helps you connect your Wi-Fi enabled device to the Harman Kardon

Aura.

Volume control: These touch sensitive buttons control the volume of the unit. Roll

your finger on these buttons to increase or decrease the volume.

• Roll your finger in the direction of (+) to increase the volume.

• Roll your finger in the direction of (-) to decrease the volume.

Harman Kardon Aura Rear Panel Controls

The rear panel of the Harman Kardon Aura allows you to work on the following:

• Service

• Aux in

• Optical

• Power

Service: The USB port is used for firmware upgrade or Wi-Fi set up only and will not

charge attached devices.

AUX-IN:The speaker includes a 3.5 mm stereo mini analog auxiliary input.

Optical: The speaker supports Digital Optical Input. Connect your optical input cable

here.

Power: Connect the AC power cord here.

Connections

This section helps you understand how to connect your device correctly to a power

source, and different input sources.

Power Connections

Connect the supplied AC power cord to the rear panel of Harman Kardon Aura.

Source Connections

The speaker offers the following source connection options:

• Wi-Fi (Using AirPlay or DLNA)

• Bluetooth

• Aux input

• Digital Optical Input

Wi-Fi: You can connect your speaker to your Wi-Fi by three different modes depending

on the device you are using.

• iOS Wireless Wi-Fi sharing – If you have an iPhone or iPad with Bluetooth

• iOS Wi-Fi sharing – If you have an iPhone or iPad and a USB to 30pin or USB

to Lightning cable

• Ad-hoc mode – If you want to set up the speaker from a computer or other

device

Bluetooth: To wirelessly stream audio to the Harman Kardon Aura from a Bluetooth-

enabled device:

1. Confirm that the Harman Kardon Aura is in the Bluetooth pairing mode

(the Bluetooth button LED will be flashing blue). If the LED is not flashing

blue, press and hold the source button until its LED begins to flash blue.

0.5 sec

Wi-Fi BLUETOOTH OPTICAL AUX IN

Connections

Aura

2. Use the device’s Bluetooth pairing menu to pair it with the Harman

Kardon Aura. The unit will appear as HK Aura BT in the list of Bluetooth

available devices. When the Harman Kardon Aura’s source button LED

illuminates blue constantly, it is paired with the device and you can

stream audio via Bluetooth from the device to the Harman Kardon Aura.

NOTE: Harman Kardon Aura gives out a sound prompt when the Bluetooth is

switched on and when you attempt to pair another Bluetooth device.

Aux Input: Connect your source device to the Harman Kardon Aura’s Aux In. Press the

source button until the LED turns off.This indicates that the source input is set to Aux in.

Digital Optical Input: Connect your digital optical input here. Harman Kardon Aura

supports PCM raw stream. Press the source button until the LED turns white. This

indicates that the source input is set to optical input.

Headphone Output: The Harman Kardon Aura also has a 3.5 mm headphone

output jack to enable easy connection of headphones for pesonal listening. Connect

your headphones and use the capacitance touch control to adjust the volume to the

desired level.

iOS Wireless Wi-Fi Sharing

If you have an Apple device, use the following method to connect your Harman Kardon

Aura to theWi-Fi network:

1. Connect your iPhone, iPad or iPod touch to the

speaker’s Bluetooth connection.

2. Ensure your iPhone, iPad or iPod Touch is connected to your Wi-Fi network.

3. Press the Wi-Fi button on the Harman Kardon Aurafor less than a second.

A pop-up window will be displayed on your iPad, iPhone or iPodTouch with a

message Share Wi-Fi Settings?

4. Press Allow.

The iPhone, iPad or iPod Touch will then share Wi-Fi settings with the Harman Kardon

Aura and it will be connected to your Wi-Fi network.This takes at least 40 seconds.

Once the Harman Kardon Aura is connected to the network, the Wi-Fi LED will light

constantly and a sound prompt can be heard.

iOS Wi-Fi Sharing with Cable

If you have an Apple device without Bluetooth connection, use the following method to

connect your Harman Kardon Aura to the Wi-Fi network:

1. Connect your iPhone, iPad or iPod touch to the speaker using the USB to 30-

pin or USB to Lightning cable provided with your iPhone, iPad or iPod touch.

2. Ensure your iPhone, iPad or iPod touch is connected to your Wi-Fi network.

3. Press the Wi-Fi button on the Harman Kardon Aura for less than a second.

A pop-up window will be displayed on your iPad, iPhone or iPodTouch with a

message Share Wi-Fi Settings?

4. Press Allow.

The iPhone, iPad or iPod Touch will then share Wi-Fi settings with the Harman Kardon

Aura and it will be connected to your Wi-Fi network.This takes at least 40 seconds.

Once the HK Aura is connected to the network, the Wi-Fi LED will light constant white

and a sound prompt will be heard.

0.5 sec

HK Aura Allow

Aura Operation

To connect using the Harman Kardon remote app:

1. Go to the Apple App store or Google Play store and down-

load the Harman Kardon Remote app.

2. Click + icon on the home screen to add a new device to your

network and choose Harman Kardon Aura from the list.

3. Follow the setup instructions in the app.

Ad-hoc Mode

If you have a Mac or PC computer, or other phone or tablet, use the following method

to connect to the system:

1. Put the Harman Kardon Aura into Ad-hoc mode by touching the

Wi-Fi button for more than 5 seconds (ensure there are no USB de-

vices plugged into the USB port). The Wi-Fi LED will flash twice.

2. Go to the Wi-Fi Settings page on your Mac, PC or Phone and

connect to the network with the name HK_Aura*****.

This may take around 40 seconds depending on your device.

3. Open your web browser and enter the IP address as

192.168.1.1 in the address bar of your browser.

4. Select the name of the Wi-Fi network you want

to connect from the drop-down menu.

5. Enter the password for your network and click Save.

6. Ensure that you have entered the password correctly. If you are

not sure, enter the password again without any mistake.

The Harman Kardon Aura will then attempt to connect to your Wi-Fi network. This may

take up to one minute depending on your Wi-Fi router. If the connection is successful,

the Wi-Fi LED will turn green and the connection successful tone can be heard. If the

connection is unsuccessful or your password incorrect, the Wi-Fi LED will flash quickly.

To try again, start from step 1.

NOTE: To restore the factory default settings, long press Source and Power

button in Operational mode.

Operation

Switching to Different Power Modes

The power button on the side panel of the HK Aura allows you to set the wireless

speaker to any of the following power modes:

• Operational mode

• Sleep mode

• Standby mode

• Off mode

To change the power modes:

• Press the power button to enter into Operational mode from Standby mode.

• Press the power button again if you want to make the system enter into

Standby mode from Operational mode.

Harman Kardon Remote

Aura

If the speaker remains inactive for more than 10 minutes, it automatically enters the

Sleep mode.

• Press the power button to enter into standby mode while the speaker is in

sleep mode. The speaker can also enter into standby mode from sleep mode

if it remains inactive for more than 30 minutes without Wi-Fi connection.

• Press the Volume and the Source buttons to enter into operational mode

from sleep mode. The speaker also enters into operational mode from sleep

mode if Bluetooth is active.

Adjusting Volume

The volume buttons on the side panel allows you to increase or decrease the volume.

These touch-sensitive buttons allow you to control volume with a gentle finger touch

on the buttons. Adjust volume using the Volume Up (+) andVolume Down (–) buttons

located on the system.

• Short press - Increase/decrease volume by 1 step

• Press and hold - Increase/ decrease volume continuously (1 step per 0.2

second)

Playing Music through Wi-Fi

To play music in your Harman Kardon Aura through Wi-Fi:

1. Press the Power button.

2. Connect to your Wi-Fi network following the above procedures.

3. If Harman Kardon Aura is on the Wi-Fi network,

the Wi-Fi LED becomes constant white.

4. Control playback from your Wi-Fi enabled device.

Playing Music through Bluetooth

Harman Kardon Aura supports the audio played from Bluetooth enabled devices.

1. Connect the Harman Kardon Aura to the Bluetooth-enabled device.

2. Control playback from your Bluetooth-capable device.

3. The Harman Kardon Aura will appear as a

Bluetooth speaker called HK Aura BT.

4. Check your phone or tablet manual for more information.

Playing Music through AirPlay®

AirPlay® allows you to wirelessly stream audio content from your Mac or PC, iPhone,

iPad or iPod touch to Harman Kardon Aura.

• iPhone, iPod touch, or iPad (running iOS version 4.2 or higher)

• MAC or PC running a compatible version of iTunes

The Harman Kardon Aura will appear as a Wi-Fi speaker in the AirPlay menu named

HK AURA WF.

Check your iPod or iPhones manual for more information on how to stream music.

Harman Kardon Remote

Harman Kardon Aura can be operated through the Harman Kardon Remote app

available in the App Store for Apple products or Google Play for Android products. You

can use the Harman Kardon Remote app to stream music to, and control the Harman

Kardon Aura through your smart phone or tablet.

0.5 sec

Aura Harman Kardon Aura LED Indication Table

Harman Kardon Aura LED Indication Table

LED State Indication

Wi-Fi LED White, Constant Wi-Fi connected

Off / Slow Flash Wi-Fi connection failed

White, Quick Flash Wi-Fi connecting to router

White, Quick Double Flash Waiting connection in JB Connect mode, or waiting iOS device reply

after triggering Wi-Fi info share

Source LED Blue, Constant Bluetooth source is active with Bluetooth connected

Blue, Slow Flash Bluetooth source is active, but no Bluetooth device is connected

White, Constant Optical source is active

Green, Constant Wi-Fi source is active

Off Aux-in source is active

All LEDs White, Regular Flash Upgrade Failed

Harman Kardon Aura LED Ring Pattern Indication

Aura

Harman Kardon Aura LED Ring Pattern Indication

Status Pattern

Booting up from Standby Mode Two Spot Clockwise

Booting Complete Fully On

Operational Mode Fully On

Sleep Mode Fully On, but in lower brightness.

Off/ Standby Mode OFF

Volume Change When volume change is complete, the same

LED ring pattern stays for 5s, and then turns to

Fully On smoothly.

Bass Volume Change (by App) When volume change is complete, the same

LED ring pattern stays for 5s, and then turns to

Fully On smoothly.

Connecting to Wi-Fi Router If successful, the LED ring pattern changes to

Fully On smoothly.

If failed, the LED ring pattern flashes 4 times,

then changes to fully On smoothly.

Adhoc Connect Mode If any other device is connected, the LED ring

pattern changes to fully on smoothly.

Wi-Fi Info Sharing The LED pattern is One Spot Clockwise, when waiting for feedback from iOS device.

Firmware Upgrading Fully Quick Breathing until upgrading finished

Firmware Upgrading Failed Fully Regular Flash.

Aura Troubleshooting

Problems Solutions

There is no sound coming from the Harman Kardon Aura • No power to unit. Make sure that the wall outlet or

power strip has power.

• Make sure that all switches for outlet/power strip are

ON and that all switches for the unit are ON.

Distortion (static, crackling or hissing sounds) • Audio source or source material may be the problem.

Test the Harman Kardon Aura with another source.

• Volume level may be too high from auxiliary-device

output. Check the volume of the source and turn it

down if necessary.

Harman Kardon Aura emits a loud hum or buzzing noise • Input cable is not plugged in properly. Check the input

cable connection.

• Cable may have problems. Replace the cable.

• It might happen due to ground loop (an unsuitable

con-nection). Turn the Harman Kardon Aura OFF and

connect it to another wall outlet.

Troubleshooting

If your Harman Kardon Aura is not performing the way you think it should, check if the problem is covered in this section before calling your dealer or contacting a Harman Kardon

representative.

Autres manuels pour Aura

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Harman Kardon Intervenants

Harman Kardon

Harman Kardon OMNI 1 0 Manuel utilisateur

Harman Kardon

Harman Kardon CITATION RECEIVER Manuel utilisateur

Harman Kardon

Harman Kardon AURA STUDIO 4 Manuel utilisateur

Harman Kardon

Harman Kardon HKS 2 Manuel utilisateur

Harman Kardon

Harman Kardon SOUNDSTICKSII Manuel utilisateur

Harman Kardon

Harman Kardon CITATION ONE MKII Manuel utilisateur

Harman Kardon

Harman Kardon LOVESAC STEALTHTECH EE4034 Manuel utilisateur

Harman Kardon

Harman Kardon GO+PLAY Manuel utilisateur

Harman Kardon

Harman Kardon JBL Bar 2.1 Deep Bass Manuel utilisateur

Harman Kardon

Harman Kardon OMNI 10+ Manuel utilisateur

Harman Kardon

Harman Kardon AVR 7500 Manuel utilisateur

Harman Kardon

Harman Kardon ONYX STUDIO 4 Manuel utilisateur

Harman Kardon

Harman Kardon HKS 4 Manuel utilisateur

Harman Kardon

Harman Kardon CITATION MULTIBEAM 700 Manuel utilisateur

Harman Kardon

Harman Kardon Aura Studio 3 Manuel utilisateur

Harman Kardon

Harman Kardon AVR 7500 Manuel utilisateur

Harman Kardon

Harman Kardon ONYX STUDIO 7 Manuel utilisateur

Harman Kardon

Harman Kardon SB 30 Manuel utilisateur

Harman Kardon

Harman Kardon Onyx Mini Manuel utilisateur

Harman Kardon

Harman Kardon CITATION 100 Manuel utilisateur

Harman Kardon

Harman Kardon Onyx Mini Manuel utilisateur

Harman Kardon

Harman Kardon Go Plus Play Mini Manuel utilisateur

Harman Kardon

Harman Kardon HKS 3 Manuel utilisateur

Harman Kardon

Harman Kardon ONE Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur