Harbor Freight Tools 59789 Instructions de montage

Visit our website at: http://www.harborfreight.com

Email our technical support at: [email protected]

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the

back of the manual (or month and year of purchase if product has no number). Keep this manual and the

receipt in a safe and dry place for future reference. 22h

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

Page 2 For technical questions, please call 1-888-866-5797. Item 59789

Specifications

Length 4-11/16"

Height 2-3/4"

Width 4-3/8"

Capacity 2-3/4"

Bushing Set 2 each of 3/8",

1/4", 5/16"

IMPORTANT SAFETY INFORMATION

Use Precautions

1. Read this instruction manual completely before

using the Self Centering Doweling Jig.

2. This product is not a toy. Do not allow

children to play with or near this item.

3. Use as intended only.

4. Inspect before every use; do not use

if parts are loose or damaged.

5. Always wear ANSI approved safety goggles when

working with tools and equipment. Wear a full

face shield if you are producing wood chips.

6. Keep children out of the work area. When

not in use, store this product in a location

that is out of reach of children.

7. Observe work area conditions. Do not use

tools in damp, wet, or poorly lit locations. Don’t

expose to rain. Keep work area well lit.

8. Do not force the tool. It will do the job better

and more safely at the rate for which it was

intended. Do not use inappropriate attachments

in an attempt to exceed the tool’s capacities.

9. Dress properly. Do not wear loose clothing or

jewelry as they can be caught in moving parts.

Non-skid footwear is recommended. Wear

restrictive hair covering to contain long hair.

10. Stay alert. Watch what you are doing. Use common

sense. Do not operate any tool when you are tired.

11. Maintain product labels and nameplates.

These carry important safety information.

If unreadable or missing, contact

Harbor Freight Tools for a replacement.

Operating Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document

including all text under subheadings therein before set up or use of this product.

Note: There are 4 holes along the top of the Jig.

Only 2 of the holes accept threaded bushings. The

other 2 holes accept 7/16″ and 1/2″ drill bits.

1. Line up the two boards that are to be

connected by the dowels. Set a square (sold

separately) on the side of each board, draw

a vertical mark to show where the dowels

are to be located (see illustration below).

Vertical Marks To Show

Dowel Location

Square Edge

Top Board

Bottom Board

2. Separate the two boards, and clamp the Doweling

Jig over the edge of one board. Align the mark

on the board with the desired dowel diameter

on the Jig (see hole sizes in Guide Block).

3. Insert appropriate bushings, then drill the

dowel hole to the desired depth. The drilled

hole will be centered in the board edge.

4. Apply glue in the holes and on the dowels.

Insert the dowels into the holes and tightly

clamp the boards until glue has dried.

5. The Self Centering Doweling Jig can be used to

make accurate butt joints, miter joints, and edge

joints, as well as acting as a mortising guide.

Page 3For technical questions, please call 1-888-866-5797.Item 59789

Alignment marks at desired locations

Drill through jig

at each mark

Parts List and Diagram

Part Description Qty

1 Handle 1

2 Screw Rod 1

3 Front Pressing Block 1

4 Screw Nut 1

5 Spring 1

6 Drill Sleeve 6

7 Set Screw 1

8 Guide Block 1

9 Lead Shaft 2

10 Steel Ball 1

11 Spring Screw 1

12 Rear Pressing Block 1

310

Record Serial Number Here:

Note: If product has no serial number, record month and year of purchase instead.

Note: Some parts are listed and shown for illustration purposes only, and are not available

individually as replacement parts. Specify UPC 193175485441 when ordering parts.

26677 Agoura Road • Calabasas, CA 91302 • 1-888-866-5797

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM

IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR

MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS

QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE

ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY

STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND

LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY

ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS

THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,

and warrants to the original purchaser that this product is free from defects in materials and workmanship for the

period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly,

to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper

installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries

to persons or property, or for incidental, contingent, special or consequential damages arising from the use of

our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation charges

prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.

If our inspection verifies the defect, we will either repair or replace the product at our election or we may

elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will

return repaired products at our expense, but if we determine there is no defect, or that the defect resulted

from causes not within the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

Autres manuels Harbor Freight Tools Outils

Harbor Freight Tools

Harbor Freight Tools Bauer 21506C-B Instructions de montage

Harbor Freight Tools

Harbor Freight Tools 95654 Manuel de la liste des pièces

Harbor Freight Tools

Harbor Freight Tools PITTSBURGH AUTOMOTIVE 56411 Instructions de montage

Harbor Freight Tools

Harbor Freight Tools 90360 Manuel utilisateur

Harbor Freight Tools

Harbor Freight Tools 46499 Manuel utilisateur

Harbor Freight Tools

Harbor Freight Tools DOYLE Instructions de montage

Harbor Freight Tools

Harbor Freight Tools 42606 Guide de référence rapide

Harbor Freight Tools

Harbor Freight Tools ICON 56683 Instructions de montage

Harbor Freight Tools

Harbor Freight Tools NITROUS 98475 Manuel utilisateur

Harbor Freight Tools

Harbor Freight Tools 95878 Manuel de la liste des pièces

Harbor Freight Tools

Harbor Freight Tools Tidy-Up Organizer 02453 Manuel utilisateur

Harbor Freight Tools

Harbor Freight Tools HAULMASTER 59665 Instructions de montage

Harbor Freight Tools

Harbor Freight Tools Pittsburgh 44983 Guide de référence rapide

Harbor Freight Tools

Harbor Freight Tools 47926 Manuel de la liste des pièces

Harbor Freight Tools

Harbor Freight Tools 91510 Manuel utilisateur

Harbor Freight Tools

Harbor Freight Tools CEN-TECH 2458 Manuel utilisateur

Harbor Freight Tools

Harbor Freight Tools 95916 Manuel de la liste des pièces

Harbor Freight Tools

Harbor Freight Tools Pittsburgh 64983 Manuel de l'opérateur

Harbor Freight Tools

Harbor Freight Tools Central Pneumatic 97728 Manuel d'installation

Harbor Freight Tools

Harbor Freight Tools 97028 Manuel utilisateur

Harbor Freight Tools

Harbor Freight Tools Central Machinery 46725 Manuel utilisateur

Harbor Freight Tools

Harbor Freight Tools MADDOX 1721C-B Instructions de montage

Harbor Freight Tools

Harbor Freight Tools OneStopGardens 91089 Manuel utilisateur

Harbor Freight Tools

Harbor Freight Tools MADDOX MH-DCT19 Instructions de montage

Manuels Outils populaires d'autres marques

Martor

Martor SECUNORM 175 Manuel utilisateur

ERKCO

ERKCO 1000 Manuel utilisateur

jbc

jbc N4473 Manuel utilisateur

FEINMETALL

FEINMETALL FZWZ-SET-001 Manuel utilisateur

Worx Professional

Worx Professional Sonicrafter WU676 Manuel utilisateur

Gage Bilt

Gage Bilt GB713SH Manuel utilisateur

Hilti

Hilti DX 9-ENP Manuel utilisateur

norbar

norbar NORTRONIC 34399 Manuel utilisateur

BGS technic

BGS technic 8578 Manuel utilisateur

Makita

Makita DHR241 Manuel utilisateur

Motor Guard

Motor Guard JMB-1250 Manuel utilisateur

Power Adhesives

Power Adhesives 805-12 Manuel utilisateur

Clemco

Clemco 24189 Manuel utilisateur

VVG

VVG VNG 903 Series Manuel utilisateur

Hilti

Hilti FX 3-A Manuel utilisateur

Grizzly

Grizzly H6472 Manuel utilisateur

axing

axing BWZ 5-02 Manuel utilisateur

Dh-Robotics

Dh-Robotics RGI-100 Comment utiliser