Harbor Freight Tools 98787 Manuel utilisateur

INSTRUCTIONS AND PRECAUTIONS

Visit our website at: http://www.harborfreight.com

SAVE THESE INSTRUCTIONS. READ ALL

PRECAUTIONS AND INSTRUCTIONS.

herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this document may not be drawn proportionally. Due to continuing improvements, actual product

may differ slightly from the product described herein. Tools required for assembly and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

FLOORING

JACK

98787

UNPACKING

When unpacking, check to make sure that

the item is intact and undamaged. If any parts are

missing or broken, please call Harbor Freight Tools

at the number shown on the cover of this document

as soon as possible.

IMPORTANT SAFETY

INFORMATION

To prevent serious injury:

Use for intended purpose only. DO NOT1.

USE FOR LIFTING.

Wear ANSI-approved safety goggles and2.

heavy-duty work gloves during use.

Keep away from children.3.

Keep clear of mechanism.4.

Inspect before use; do not use if damaged,5.

or if parts are loose.

Do not force handle. Do not strike handle or6.

use extension on handle.

Keep work area clean and well lit.7.

Do not use when tired or when under the8.

inuence of drugs or medication.

Maintain product labels and nameplates.9.

These carry important safety information.

If unreadable or missing, contact Harbor

Freight Tools for a replacement.

Revised Manual 10a

SKU 98787 For technical questions, please call 1-800-444-3353. Page 2

OPERATION INSTRUCTIONS

Figure 1

Pressure Plate Handle

Claw Mechanism

1. This Flooring Jack is designed to hold

ooring strips in place.

It can be used to help straighten warped,2.

bowed and/or crooked ooring.

When starting at a straight line (usually3.

snapped onto the sub-oor with a chalk line),

nail or glue down the rst ooring strip.

NOTE:4. The starting line should be close

enough to the wall so that a strip of nish

molding will cover whatever gap exists

between the wall and the rst strip.

Use the Flooring Jack to apply tension to5.

additional wooden ooring strips as they are

joined to the rst strip.

Use only enough pressure to hold each6.

additional strip in place for nailing or gluing.

NOTE:7. If you are using the Flooring Jack to

straighten warped, bowed or crooked ooring

strips, additional force can be applied.

To release the Jack, raise the handle fully8.

forward to disengage the pawls. The bar is

then manually retracted.

When nished with the Flooring Jack, store it 9.

inside in a dry area, away from children.

NOTE: No replacement parts are available for this

product.

REV 10a

Table des matières

Autres manuels Harbor Freight Tools Jack

Harbor Freight Tools

Harbor Freight Tools HAUL-MASTER 57746 Manuel utilisateur

Harbor Freight Tools

Harbor Freight Tools Pittsburgh 56736 Manuel utilisateur

Harbor Freight Tools

Harbor Freight Tools Haulmaster 58203 Instructions de montage

Harbor Freight Tools

Harbor Freight Tools PITTSBURGH 64879 Instructions de montage

Harbor Freight Tools

Harbor Freight Tools Pittsburgh Automotive 64545 Instructions de montage

Harbor Freight Tools

Harbor Freight Tools BADLAND Instructions de montage

Harbor Freight Tools

Harbor Freight Tools BADLAND 58395 Instructions de montage

Harbor Freight Tools

Harbor Freight Tools Central Hydraulics 03185 Manuel utilisateur

Manuels Jack populaires d'autres marques

Omega Lift Equipment

Omega Lift Equipment 18122C Instructions d'utilisation

Pittsburgh

Pittsburgh 58816 Instructions de montage

Unimec

Unimec TP Manuel utilisateur

Sonic

Sonic 4800703 Manuel utilisateur

BGS technic

BGS technic 70039 Manuel utilisateur

TradeQuip

TradeQuip 1128T Manuel utilisateur

VEVOR

VEVOR TJD-12000SP-F Manuel utilisateur

ULTIMATE SPEED

ULTIMATE SPEED URW 2 A1 HYDRAULIC TROLLEY JACK Manuel utilisateur

Stels

Stels 51131 Manuel utilisateur

Bushranger

Bushranger RJX01 Manuel utilisateur

Clarke

Clarke CTJ2500QLG Manuel d'installation et d'exploitation

Valex

Valex 1650520 Manuel utilisateur

Pfaff

Pfaff Merkur M0 Manuel utilisateur

Beta

Beta 3050/K Supplément

Sealey

Sealey 1050CXHV Manuel utilisateur

Jung

Jung JH Series Manuel utilisateur

URIAH

URIAH UC200020 Manuel utilisateur

Kennedy

Kennedy KSJ010 Manuel utilisateur