- 7 -
2. Setting up
Observe following guideline and indicated printing procedure to
minimize hazard what it would be caused by hardened ink.
(A) Unpacking the Printer
<1> Uncover the main paper box.
Remove all protective materials (the foam blocks) and the optional components
(ink bottles, cleaner bottle, manual, driver CD etc.)
Uncover the vinyl wrapper from the printer and remove other foam blocks.
Check the printer for damages.
<2> Moving printer requires two persons at least.
Carefully, lift the printer and place it on a solid-stable-level
table (place). Remove all tapes from Y-CR and Y-CR lock
for delivery (see the image right)
Keep the Y-CR lock and screws for future use.
<3> To check Y-CR and Table performance, connect power cable into the socket.
Secure the Y-CR moving space and place Y-CR in the middle of machine by hand.
Switch on the power, and check that Y-CR is moving rearward.
Check Stand-by, Y-Jog and Z-Jog buttons for working.
(B) Ink Feeding
<01> Make sure the optional components for setting up ink:
7 kinds of ink (Yellow, Magenta, Cyan,
Matte black, Photo black, Red, Blue) and
Liquid cleaner for eco solvent ink.
<02> Make sure the indication sticker
on the rear of ink bottle holder.
Ink bottle housing may differ from the image at above. If so, simply open all lid and fill bottles
with ink in accordance with the indication sticker.
