Hanna Instruments HI 83749 Manuel utilisateur

INSTRUCTION MANUAL

HI 83749

Turbidity & Bentocheck

All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the

Thank you for choosing a Hanna Instruments product.

Please read this instruction manual carefully before using this meter.

This manual will provide you with the necessary information for correct use of this meter,

as well as a precise idea of its versatility.

If you need additional technical information, do not hesitate to e‑mail us at

[email protected] or view our worldwide contact list at www.hannainst.com.

Dear

Customer,

TABLE OF CONTENTS

1. PRELIMINARY EXAMINATION ............................................................................................... 5

2. GENERAL DESCRIPTION....................................................................................................... 6

2.1. BENTOCHECK......................................................................................................... 6

2.2. TAG IDENTIFICATION SYSTEM.................................................................................. 7

2.3. ABBREVIATIONS..................................................................................................... 8

3. SPECIFICATIONS................................................................................................................. 9

4. FUNCTIONAL DESCRIPTION................................................................................................ 10

4.1. INSTRUMENT DESCRIPTION .................................................................................. 10

4.2. KEYPAD DESCRIPTION........................................................................................... 10

4.3. CONNECTORS DESCRIPTION.................................................................................. 11

4.4. DISPLAY DESCRIPTION.......................................................................................... 12

4.5. BEEPER............................................................................................................... 12

5. GENERAL TIPS FOR AN ACCURATE MEASUREMENT............................................................... 13

5.1. CUVETTE.............................................................................................................. 13

5.2. CUVETTE HANDLING ............................................................................................. 13

5.3. CUVETTE OILING................................................................................................... 13

5.4. SAMPLING TECHNIQUE......................................................................................... 13

5.5. REMOVING AIR BUBBLES...................................................................................... 14

5.6. MEASUREMENT TIPS............................................................................................ 14

6. CALIBRATION PROCEDURE................................................................................................. 15

6.1. CALIBRATION....................................................................................................... 15

6.2. OUT OF CALIBRATION RANGE FUNCTION................................................................ 17

6.3. CALIBRATION ERRORS .......................................................................................... 18

6.4. DELETE CALIBRATION............................................................................................ 18

7. TURBIDITY MEASUREMENT ............................................................................................... 19

7.1. AVG (SIGNAL AVERAGE MODE) .............................................................................. 20

7.2. CONTINUOUS MEASUREMENT............................................................................... 20

8. BENTOCHECK (PROTEIN STABILITY TEST)............................................................................ 21

9. DETERMINATION OF BENTONITE REQUIREMENT ................................................................. 24

9.1. SAMPLE PREPARATION ......................................................................................... 24

9.2. READING PROCEDURE .......................................................................................... 26

9.3. COMPARATIVE MODE............................................................................................ 28

10. LOGGING........................................................................................................................ 29

10.1. VIEW LOGGED DATA............................................................................................ 30

11. GOOD LABORATORY PRACTICE (GLP)................................................................................. 33

TABLE OF CONTENTS

12. SETUP........................................................................................................................... 35

12.1. SET REFERENCE VALUE....................................................................................... 35

12.2. ACTIVATING COMPARATIVE MODE........................................................................ 36

12.3. SET EPA COMPLIANCE MODE............................................................................... 37

12.4. SET BEEPER....................................................................................................... 38

12.5. SHOW / HIDE THE TIME ..................................................................................... 38

12.6. SET THE DATE.................................................................................................... 39

12.7. SET THE TIME .................................................................................................... 40

12.8. SET INSTRUMENT ID .......................................................................................... 41

12.9. SET BAUD RATE ................................................................................................. 42

12.10. LCD BACKLIGHT................................................................................................ 42

13. TAG INSTALLATION ......................................................................................................... 43

14. LAMP REPLACEMENT....................................................................................................... 44

15. BATTERY MANAGEMENT.................................................................................................. 45

15.1. BATTERIES REPLACEMENT................................................................................... 46

15.2. USING AN AC ADAPTER....................................................................................... 46

16. ERROR CODES................................................................................................................ 47

17. PC INTERFACE ................................................................................................................ 48

18. ACCESSORIES................................................................................................................. 49

CERTIFICATION...................................................................................................................... 50

RECOMMENDATIONS FOR USERS............................................................................................ 50

WARRANTY ........................................................................................................................... 50

PRELIMINARY EXAMINATION

1. PRELIMINARY EXAMINATION

Remove the meter from the packing material and examine it carefully. For further assistance, please

contact your local Hanna Instruments office or email us at [email protected].

This HI83749 Turbidity & Bentocheck Meter is supplied complete with:

• Six sample cuvettes and caps

• Four calibration cuvettes (HI83749-11)

• Bentocheck reagent (HI83749-0) and Silicone oil (HI93703-58)

• One 1000 µL automatic pipette with two tips and Instructions sheet

• Four 25 mL glass vials with caps

• One 1 mL syringe with two tips; one Funnel; Filter paper (25 pieces)

• Five tag holders with tags (HI920005)

• Tissue for wiping the cuvettes

• Four 1,5V AA batteries

• AC Adapter

• Instruction manual

• Instrument quality certificate

• Rugged carrying case

Note:Save all packing material until you are sure that the instrument works correctly. Any

damaged or defective item must be returned in the original packing with the supplied accessories.

GENERAL DESCRIPTION

2. GENERAL DESCRIPTION

The HI83749 is an auto diagnostic microprocessor meter that benefits from Hanna’s years of

experience as manufacturer of analytical instruments.

The meter is especially designed for wine analyses and, beside turbidity measurements, it allows to

make tests to verify protein stability (e.g. Bentocheck).

The instrument compensates wine color to guarantee accurate readings during the vinification process;

also for the darkest red wine samples. The optical system, consisting of a tungsten filament lamp

and multiple detectors, assures long term stability and minimizes the need of frequent calibration.

Calibration can be anyway easily performed at any time in two, three or four points (<0.1, 15, 100

and 500 NTU-adjustable calibration points), using the supplied or user prepared standards.

The meter has all necessary GLP (Good Laboratory Practice) functions to allow maximum traceability of

data like a real time clock, log-on-demand (up to 200 measurements), and T.I.S. -Tag Identification

System to give all recorded data a location, time and date stamp.

The meter measures turbidity of samples from 0.00 to 1200 NTU (Nephelometric Turbidity Units) and

is USEPA compliant. In the USEPA measurement mode the instrument rounds the readings to meet

USEPA reporting requirements. It has a continuous measurement mode to verify the settling rate of

suspended matter, and a signal average (AVG) mode to accumulate multiple readings giving a final

average value. The AVG routine is particularly useful to measure samples with suspended particles

with different dimensions.

The HI83749 has a user-friendly interface, with a large backlit LCD (Liquid Crystal Display). Acoustic

signals and displayed codes to guide the user step by step through routine operations.

This valuable splash proof portable turbidity meter is supplied in a rigid carrying case that offers

protection for harsh environments.

2.1. BENTOCHECK

The prevention of protein haze or deposit in bottled white wines is a universal concern and often a wine

needs to be stabilized before bottling. One commonly used stabilization agent is bentonite. Bentonite

is a volcanic clay earth type fining agent (like kaolin). It improves the clarity and stability of wine

but has also negative aspects because of the volume of lees formed, reduction of tannin and color.

Since there are different types and qualities of bentonite with different capacity of protein removal, it

is important to make laboratory trails with the same lot and wetting degree of the bentonite as that

will be used in the cellar.

Protein stabilization is normally not a problem in bottled red wines because of the relatively high

concentration of phenols that binds and precipitates with the instable proteins before bottling. Often

bentonite is added to red wines at a level of about 12 g/hL (1 lb/1000 gal), reducing colloidal

suspended particles thus improving membrane filterability.

Wines with low phenols contents, such as rose, light reds and whites should be checked for protein

stability before bottling. Hanna is offering a rapid test to verify the risk of future protein haze formation.

GENERAL DESCRIPTION

If protein instability is detected, a next test can help defining the right amount of bentonite to be

added for improving protein stability. It is important not to overdose bentonite, avoiding stripping

wine flavour, body, and significant loss of color, especially in young red wines. Moreover, adding only

the necessary amount of bentonite to obtain the desired protein stability is also costs saving.

2.2. TAG IDENTIFICATION SYSTEM

Hanna is the first manufacturer of turbidity instruments that has decided to add the unique T.I.S. - Tag

Identification System to portable turbidity meters, to meet the more restrictive needs for traceability

and data management of our clients.

The system is designed for scientific and industrial applications, or to prove during safety audits and

inspections that samples have been truly taken on pre-established locations.

The system is as easy to install as to operate. Just fix the so-called iButton® tags near your sampling

sites that need to be checked often, and with this the T.I.S. is setup. The tag contains a computer chip

embedded in a durable stainless steel can. It is designed to withstand the harsh environments, indoors

or outdoors. The number of tags that can be installed is practically unlimited, because each tag has

a unique identification code.

Immediately after installation of the tags you can start collecting data. Use the meter to take

measurements and memorize the test result by pressing the Log-on-Demand key. Then, the instrument

will ask for the tag identification. Simply touching the iButton® with the matching connector on the

meter does identify and authenticate logging, by storing the iButton® serial number, time and date

stamp events.

The power of the T.I.S. features resides in the PC application. Download all test data to your PC and

use our HI92000 Windows® compatible application software for further data management. You can

sort or filter all your collected data on different criteria like on a specific sampling location, parameter,

date and time intervals, or fix range to filter measured values. The data can be plotted in a graph,

exported to other common Windows® applications or printed for reporting purpose.

It is also possible to add new tags later on, thus increasing an already existing database. Each

time the PC software recognizes a not already registered tag, it will ask for a description of the new

sampling location.

GENERAL DESCRIPTION

2.3. ABBREVIATIONS

NTU Nephelometric Turbidity Units

FTU Formazin Turbidity Units

USEPA US Environmental Protection Agency

LCD Liquid Crystal Display

RTC Real Time Clock

T.I.S. Tag Identification System

iButton® is registered Trademark of “MAXIM/DALLAS semiconductor Corp.”

Windows® is registered Trademark of “MICROSOFT Corporation”

A light beam that passes through the sample is scattered in all directions. The intensity and pattern

of the scattered light is affected by many variables like wavelenght of the incident light, particle size,

shape, refractive index and color.

The optical system includes a tungsten filament lamp, a scattered light detector (900) and a

transmitted light detector (1800). The microprocessor of the instrument calculates the NTU value from

the signals that reaches the two detectors.

SPECIFICATIONS

3. SPECIFICATIONS

Range 0.00 to 9.99 NTU

10.0 to 99.9 NTU

100 to 1200 NTU

Range Selection Automatically

Resolution 0.01 NTU from 0.00 to 9.99 NTU

0.1 NTU from 10.0 to 99.9 NTU

1 NTU from 100 to 1200 NTU

Accuracy ±2% of reading plus 0.05 NTU

Repeatibility ±1% of reading or 0.02 NTU, whichever is greater

Stray Light < 0.05 NTU

Light Source Tungsten filament lamp

Light Detector Silicon Photocell

Method Ratio Nephelometric Method.

Display 60 x 90mm backlit LCD

Calibration Two, three or four points calibration

LOG Memory 200 records

Serial Interface RS232 or USB 1.1

Environment 0 to 50°C (32 to 122°F); max 95% RH non-condensing

Power supply 4 x 1.5V AA alkaline batteries or AC adapter

Auto Shut-off After 15 minutes of non-use

Dimensions 224 x 87 x 77 mm (8.8 x 3.4 x 3.0”)

Weight 512 g (18 oz.)

FUNCTIONAL DESCRIPTION

4. FUNCTIONAL DESCRIPTION

4.1. INSTRUMENT DESCRIPTION

1. Cuvette lid

2. Cuvette holder

3. Backlit Liquid Crystal Display (LCD)

4. Splash proof keypad

5. Lamp connector

6. Lamp holder

7. Battery compartment

4.2. KEYPAD DESCRIPTION

8. ON/OFF - press to turn the instrument ON or to activate the back light. Keep the key pressed for

three seconds to turn the instrument OFF.

Autres manuels pour HI 83749

Table des matières

Autres manuels Hanna Instruments Instrument de mesure

Hanna Instruments

Hanna Instruments HI 96814 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 9812 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 96771C Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 221 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 95729C Manuel utilisateur

Hanna Instruments

Hanna Instruments HI97729 Manuel utilisateur

Hanna Instruments

Hanna Instruments HALO2 HI9810382 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI97779 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 720 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 9811-5 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 8734 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI96000 Series Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 83214 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI96841 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI775 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI96747C Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 96811 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 96804 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI9064 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 83208 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 3221 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI96702C Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 96813 Manuel utilisateur

Hanna Instruments

Hanna Instruments Checker HI 711 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur