Hammerhead HG2200AT Manuel utilisateur
TECHNICAL PUBLICATIONS
Operator's
Manual
HG2200/HG2200AT
Issue 2.1
960-1119
Original Instruction
HG2200/HG2200AT Operator’s Manual
Overview - 1
Overview
Chapter Contents
Serial Number Location . . . . . . . . . . . . . . . . . . . . . . 2
Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Equipment Modification . . . . . . . . . . . . . . . . . . . . . . 3
Unit Components . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
• Tracked Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
• Wheeled Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Operator Orientation. . . . . . . . . . . . . . . . . . . . . . . . . 6
• Tracked Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
• Wheeled Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Operating Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
• Winch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
• Tracks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . 8
• Bulleted Lists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
• Numbered Lists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
HG2200/HG2200AT Operator’s Manual
Serial Number Location
2 - Overview
Serial Number Location
Record serial numbers and date of purchase in spaces provided.
date of manufacture
date of purchase
winch unit serial number (1)
engine serial number (2)
j64om002w.eps
12
HG2200/HG2200AT Operator’s Manual
Intended Use
Overview - 3
Intended Use
HammerHead® winches are intended for pedestrian controlled pipe bursting, pipe slitting, slip lining, and
cable pulling. The HG2200 HydroGuide® Winch is a dual capstan design winch with the capacity of
utilizing multiple sizes of wire cable. The HG2200 provides up to 22 tons (20 tonnes) of constant tension
for pipe bursting, pipe slitting, slip lining, and cable pulling.
The unit is designed for operation in temperatures typically experienced in earth moving and construction
work environments. Contact your HammerHead dealer for provisions required for operating in extreme
temperatures. Use in any other way is considered contrary to the intended use.
HammerHead pipe bursters and power units should be operated, serviced, and repaired only by persons
familiar with their particular characteristics and acquainted with the relevant safety procedures.
Equipment Modification
This equipment was designed and built in accordance with applicable standards and regulations.
Modification of equipment could mean that it will no longer meet regulations and may not function properly
or in accordance with the operating instructions. Modification of equipment should only be made by
competent personnel possessing knowledge of applicable standards, regulations, equipment design
functionality/requirements and any required specialized testing.
HG2200/HG2200AT Operator’s Manual
Unit Components
4 - Overview
Unit Components
Tracked Unit
1. Winch
2. Mast
3. Tracks
4. ESID strobe*
5. Wireless remote control lights
6. Stabilizer
7. Downhole unit
*Optional
j64om003w.eps
12
3457 6
HG2200/HG2200AT Operator’s Manual
Unit Components
Overview - 5
Wheeled Unit
1. Winch
2. Mast
3. Tires
4. ESID strobe*
5. Wireless remote control lights
6. Stabilizer
7. Downhole unit
8. Hitch
*Optional
j64om004w.eps
12
346578
HG2200/HG2200AT Operator’s Manual
Operator Orientation
6 - Overview
Operator Orientation
Tracked
1. Front of unit
2. Right side of unit
3. Rear of unit
4. Left side of unit
Wheeled Unit
1. Front of unit
2. Right side of unit
3. Rear of unit
4. Left side of unit
IMPORTANT: Top view of unit is shown.
IMPORTANT: Top view of unit is shown.
j64om001w.eps
1
3
24
j64om005w.eps
1
3
24
HG2200/HG2200AT Operator’s Manual
Operating Area
Overview - 7
Operating Area
Winch
Operator should stand only in the location marked by
number 1.
Tracks
Operator should stand only in the location marked by
number 1.
IMPORTANT: Top view of unit is shown.
IMPORTANT: Top view of unit is shown.
j64om006w.eps
1
j64om007w.eps
1
HG2200/HG2200AT Operator’s Manual
About This Manual
8 - Overview
About This Manual
This manual contains information for the proper use of this machine. See Operation Overview for basic
operating procedures. Cross references such as “See page 50” will direct you to detailed procedures.
Bulleted Lists
Bulleted lists provide helpful or important information or contain procedures that do not have to be
performed in a specific order.
Numbered Lists
Numbered lists contain illustration callouts or list steps that must be performed in order.
HG2200/HG2200AT Operator’s Manual
Reporting Safety Defects
Foreword - 9
Foreword
This manual is an important part of your equipment. It provides safety information and operation
instructions to help you use and maintain your HammerHead® equipment.
Read this manual before using your equipment. Keep it with the equipment at all times for future reference.
If you sell your equipment, be sure to give this manual to the new owner.
If you need a replacement copy, contact your HammerHead dealer. If you need assistance in locating a
dealer, visit our website at www.hammerheadtrenchless.com or write to the following address:
HammerHead Trenchless Equipment
500 South C.P. Avenue
Lake Mills, WI 53551
USA
The descriptions and specifications in this manual are subject to change without notice. Earth Tool
Company LLC reserves the right to improve equipment. Some product improvements may have taken
place after this manual was published. For the latest information on HammerHead equipment, see your
HammerHead dealer.
Thank you for buying and using HammerHead equipment.
Reporting Safety Defects
If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you
should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to
notifying The Charles Machine Works, Inc, Attn: Product Safety Coordinator.
If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists
in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become
involved in any individual problems between you, your Ditch Witch dealer, or The Charles Machine Works,
Inc.
To contact NHTSA you may either call the Auto Safety Hotline toll-free at 1-800-424-9393 (366-0123 in
Washington, DC area) or write to:
NHTSA
U.S. Department of Transportation
400 7th Street SW (NSA-11)
Washington, DC 20590
You can also obtain other information about motor vehicle safety from the Hotline.
Ce manuel convient aux modèles suivants
1
Table des matières
