Hama BRS1 Manuel utilisateur

00004628

Bluetooth Remote Shutter BRS1

Bluetooth-Fernauslöser

Operating Instructions

Bedienungsanleitung

2 4

Open Battery Cover Change Battery Cover Close Battery Cover

GOperating instruction

Controls and Displays

1. LED indicator light

2. CAMERA 360 /iOS power /release button

=photo /video /continuous shooting

3. ANDROID release button

=photo /video /continuous shooting

4. Battery compartment cover

1. Explanation of Warning Symbols and Notes

Warning

This symbol is used to indicate safety instructions or to draw your attention to

specichazards and risks.

Note

This symbol is used to indicate additional information or important notes.

2. Package Contents

•Bluetooth Remote Shutter BRS1

•1hand strap

•1battery (CR2032)

•These operating instructions

3. Safety Notes

•Protect the product from dirt, moistureand overheating, and only use it in adry

environment.

•Donot use the product in areas wherethe use of electronic devices is not permitted.

•Donot use the product in moist environments and avoid splashes.

•Donot drop the product and do not expose it to any major shocks.

•Dispose of packaging material immediately according to locally applicable

regulations.

•Donot modify the product in any way.Doing so voids the warranty.

Warning –Batteries

•Immediately remove and dispose of dead batteries from the product.

•Only use batteries (or rechargeable batteries) that match the specied type.

•When inserting batteries, note the correct polarity (+ and -markings) and insert

the batteries accordingly.Failure to do so could result in the batteries leaking or

exploding.

•Donot overcharge batteries.

•Donot throw batteries in a re.

•Keep batteries out of the reach of children.

•Keep batteries out of the reach of children. If swallowed, batteries can be lethal.

If abattery is swallowed, seek medical assistance immediately.

•Donot short circuit the batteries/rechargeable batteries and keep them away

from uncoated metal objects.

4. System Requirements

•The SeleBluetooth remote release supports Bluetooth-capable terminal devices

such as smartphones and tablet PCs that run the iOS 6orAndroid 4.2.2 (or newer)

operating systems.

Note

•Note that support of the Bluetooth remote release depends on your terminal

device.

•Please refer to the operating instructions for the device you areusing.

5. Getting Started

•Open the battery compartment by turning the battery compartment cover (4)

clockwise to the “OPEN” position using acoin. (B)

•Alternatively,removethe battery compartment cover (4) and insert aCR2032 battery

with the correct polarity (B).

•Close the battery compartment by turning the battery compartment cover (4)

anticlockwise to the “CLOSE” position using acoin. (B)

6. Operation

Note

•The functions described in this section areonly available for Bluetooth-capable

terminal devices.

•Note that the maximum range for Bluetooth is 10 metres without obstacles

such as walls, people, etc.

6.1. Bluetooth pairing

Note –Pairing

•Make surethat your Bluetooth-capable terminal device is on and Bluetooth

is activated.

•Make surethat your Bluetooth-capable terminal device is visible for other

Bluetooth devices.

•For moreinformation, please refer to the operating instructions of your terminal

device.

•Press and hold the Power/Release button (2) for about 3seconds to switch on the

Bluetooth seleremote release. The LED indicator light (1) will begin to ash.

•This means the SeleBluetooth remote release is searching for aBluetooth

connection.

•Open the Bluetooth settings on your terminal device and wait until Hama BRS1

appears in the list of Bluetooth devices found.

•Select Hama BRS1 and wait until the Seie Bluetooth remote release is listed as

connected in the Bluetooth settings on your terminal device. The LED indicator light

(1) switches off.

•You can now use the SeleBluetooth remote release.

6.2. Automatic Bluetooth connection (after successful pairing)

Note

•Make surethat your Bluetooth-capable terminal device is on and Bluetooth

is activated.

•Make surethat your Bluetooth-capable terminal device is visible for other

Bluetooth devices.

•For moreinformation, please refer to the operating instructions of your terminal

device.

•The SeleBluetooth remote release remains connected to the Bluetooth device it

was last paired with.

•Press and hold the Power/Release button (2) for about 3seconds to switch on the

Bluetooth seleremote release. The LED indicator light (1) will begin to ash.

•You can now use the Bluetooth remote release.

Note –Connection impaired

After the devices have been paired once, the connection is then established

automatically.Ifthe Bluetooth connection is not established automatically,check

the following:

•Check the Bluetooth settings of your terminal device to see whether Hama

BRS1 is connected. If not, repeat the steps listed under 6.1. Bluetooth

pairing.

•Check whether obstacles areimpairing the range. If so, move the devices

closer together.

•The performance can also be affected by aweak battery.Change the battery

if necessary.

•Only one Bluetooth device can be connected at atime. If thereisanactive

connection to another device, deactivate this connection and try again.

6.3. Remote release function

•After successful Bluetooth connection, open the camerafunction on your terminal

device.

•Set your device such that it uses the cameraonthe front, so that you can take

asele, or use the cameraonthe back to take pictures or recordvideos normally.

•Ifusing aterminal device with the iOS 6operating system or alater version:

Press the CAMERA 360 /iOS release button (2) to trigger the selected function

(sele, photo, video).

•Ifusing aterminal device with the Android 4.2.2 operating system or alater version:

Press the ANDROID release button (3) to trigger the selected function (sele,

photo, video).

Note –Remote release function

Adirect line-of-sight connection between the terminal device and the Bluetooth

remote release is not necessary.You can, for instance, take apicturebypressing

the release button (2/3) in your coat pocket.

Note –Cameraapp

•The standardcameraapps of certain terminal devices do not support the Sele

Bluetooth remote release.

•You can install the Camera360 app on your terminal device to use in place of

the standardcameraapp.

•Ifyou use this app, press the CAMERA 360 /iOS release button (2) to trigger

the selected function (sele, photo, video).

•Press and hold the Power/Release button (2) for about 3seconds

to switch off the Bluetooth seleremoterelease.

6.4. Replacing the batteries

The battery has been designed to last for up to 2,000 shots, although this depends on

the conditions of use.

If the Bluetooth remote release does not respond after you press the release button (2/3),

or does not connect to the terminal device, etc., change the battery as follows: See (B).

7. Care and Maintenance

Only clean this product with aslightly damp, lint-free cloth and do not use aggressive

cleaning agents. Make surethat water does not get into the product.

8. Warranty Disclaimer

Hama GmbH &Co. KG assumes no liability and provides no warranty for damage

resulting from improper installation/mounting, improper use of the product or from

failuretoobserve the operating instructions and/or safety notes.

9. Technical Data

Bluetooth Remote Shutter

Bluetooth version 3.0

Bluetooth Class Class 2

Range Max. 10 m

Dimensions (W xLxH) 50 x33x13 mm

Weight Approx. 10 g

Battery type CR2032

10. Declaration of Conformity

Hereby,Hama GmbH &CoKG declares that the radio equipment type

[00004628] is in compliance with Directive 2014/53/EU.The full text

of the EU declaration of conformity is available at the following internet

address: www.hama.com /00004628/Downloads.

Frequency band(s) 2.402 GHz ~2.480 GHz

Maximum radio-frequency

power transmitted 0.15 mW E.I.R.P.

Bedienungselemente und Anzeigen

1. LED-Kontrollleuchte

2. Power-/ Auslösetaste CAMERA 360/ iOS

=Foto-/ Video-/ Serienaufnahme

3. Auslösetaste ANDROID

=Foto-/ Video-/ Serienaufnahme

4. Batteriefachabdeckung

1. Erklärung von Warnsymbolen und Hinweisen

Warnung

Wirdverwendet, um Sicherheitshinweise zu kennzeichnen oder um

Aufmerksamkeit auf besondereGefahren und Risiken zu lenken.

Hinweis

Wirdverwendet, um zusätzlich Informationen oder wichtige Hinweise zu

kennzeichnen.

2. Packungsinhalt

•Bluetooth-Fernauslöser BRS1

•1Handschlaufe

•1Batterie (CR2032)

•diese Bedienungsanleitung

DBedienungsanleitung

3. Sicherheitshinweise

•Schützen Sie das Produkt vor Schmutz, Feuchtigkeit und Überhitzung und

verwenden Sie es nur in trockenen Umgebungen.

•Benutzen Sie das Produkt nicht in Bereichen, in denen elektronische Produkte nicht

erlaubt sind.

•Verwenden Sie das Produkt nicht in einer feuchten Umgebung und vermeiden Sie

Spritzwasser.

•Lassen Sie das Produkt nicht fallen und setzen Sie es keinen heftigen

Erschütterungen aus.

•Entsorgen Sie das Verpackungsmaterial sofort gemäß den örtlich gültigen

Entsorgungsvorschriften.

•Nehmen Sie keine Veränderungen am Produkt vor.Dadurch verlieren sie jegliche

Gewährleistungsansprüche.

Warnung -Batterien

•Entfernen und entsorgen Sie verbrauchte Batterien unverzüglich aus dem

Produkt.

•Verwenden Sie ausschließlich Akkus (oder Batterien), die dem angegebenen

Typentsprechen.

•Beachten Sie unbedingt die korrekte Polarität (Beschriftung +und -) der

Batterien und legen Sie diese entsprechend ein. Bei Nichtbeachtung besteht die

Gefahr des Auslaufens oder einer Explosion der Batterien.

•Laden Sie Batterien nicht.

•Werfen Sie Batterien nicht ins Feuer.

•Bewahren Sie Batterien außerhalb der Reichweite von Kindern auf.

•Bewahren Sie Batterien außerhalb der Reichweite von Kindern auf.Batterien

sind bei Verschlucken lebensgefährlich. Wurde eine Batterie verschluckt, suchen

Sie sofort medizinische Hilfe auf.

•Schließen Sie Akkus/Batterien nicht kurz und halten Sie sie von blanken

Metallgegenständen fern.

4. Systemvoraussetzungen

•Der Bluetooth SeleFernauslöser unterstützt Bluetooth-fähige Endgeräte wie

Smartphones und Tablet-PCs, auf denen die Betriebssysteme iOS 6bzw.Android

4.2.2 oder neuereVersioneninstalliert sind.

Table des matières

Langues :

Autres manuels Hama Télécommande

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation