Hama 220810 Manuel utilisateur

220810

TV WALL BRACKET

GOperating Instructions

Contents
Explanationofwarning symbols and notes ..........................3
Package contents.............................................4
Additionally required tools ......................................4
Safety instructions ............................................5
Application and specifications ...................................5
Preparation and assembly ......................................6
1 Mounting on the wall.........................................7
1.1 Preparing the intended mounting surface ........................7
1.2 Attaching the wall bracket....................................8
2 Mounting on the TV set .......................................9
2.1 Mounting the VESA plate on the back of the TV set ................10
3 Mounting the TV on the wall bracket ............................11
Adjustment&maintenance ....................................12
Setting options..............................................12
Technical data ..............................................13
Warranty disclaimer .........................................14
Service and support .........................................14
Warranty conditions.........................................14

GOperatingInstructions

Thank you for choosing aHama product.

Take your time and read the followinginstructions and information completely. Please keep these instructions

in asafe place for futurereference. If you sellthe device, pass on the illustrated quickstart guide and the safety

instructions in printed form tothe new owner.

1. Explanation of warning symbols and notes

Warning

This symbol is used toindicate safety instructionsortodrawyourattention to specichazardsand risks.

Note

This symbol is used toindicate additionalinformation or important notes.

2. Package contents

•TV wallbracket

•VESA arms (2x)

•Spirit level

•Mounting kit

•Safety instructions, illustrated quick start guide

Mounting kit

A1 6x50(x4) D1 M8x12 (x4)

Ø8x50 (x4)

D2 M8x20(x4)

A3 M6 (x4) D3 M8x30(x4)

B1 M6 (x4) D4 M8x50(x4)*

B2 Ø8x10 (x4) E1 M4x12(x4)

B3 Ø8x20(x4) E2 M4x20(x4)

C1 M6x12 (x4) F1 (x1)

C2 M6x20(x4)

*M8x50 +Ø8x5 =M8x45

Note

Please check the mountingkit for completeness beforeinstalling the bracket andensure thatthereare no

faulty or damaged parts.

3. Additionally required tools

8mm 10

Note

Never installthe bracket alone. Seek assistanceand help!

4. Safety instructions

Warning

•Given the multitude of terminaldevices and wallstructuresavailable on the market,the suppliedmounting

kit is unable to cover every option.

•It occasionally happens thatthe screws for attaching the device to the bracket aretoo long.

•Please note that the supplied wall plugs arefor use with solid, hollow andboardconstructionmaterials

only.

•Read the operatinginstructionsfor your terminal device beforeattempting to mount it. The instructions

provide information about thetype and measurements of suitable fastening materials.

•If the supplied mounting kit does not contain suitable fastening materialsfor mounting the terminal device,

purchase these from aspecialised dealer.

•Never apply force during assembly.This candamage your device or the holder.

•If in doubt, have this productinstalled by aqualied technician -donot attempt to installityourself!

•Do not mount the productabove locations where persons might sit or stand.

•Once you have mounted the productand theattached load, checkthattheyare suciently secureand safe

to use.

•Youshould repeat this checkatregularintervals(at least every threemonths).

•Ensurethat the product does not exceed its maximum permitted carryingcapacityand thatnoload exceeding

the maximum permitted dimensionsisattached.

•Make sure that the productisloaded symmetrically.

•Maintain the necessary safety clearancearoundthe attached load (depending on themodel).

•In the event of damage tothe product,remove the attached load and stop using the product.

•Do not attach anyadditional objectstothe product.

5. Application andspecifications

•The bracket is used for mounting at screens in private, non-commercialhouseholds.

•The bracket is intended only for use inside buildings.

•Use the bracket only for theintended purpose.

6. Preparation and assembly

Note

•Never installthe bracket alone. Seek assistance and help!

•Different end devices havedifferentconnections for cablingand otherdevices.Beforecommencing the

installation, check whether the necessary connections can stillbereached aftermounting.

•Depending on theproductand mountingmethod, you may not need allparts of the mounting kit. It is

thereforepossible that unneeded screws and other smallparts willbeleftovereven aftercorrect mounting.

Keep these in asafe placetogether withthese operating instructions foruse for later reference (saleofthe

product, movinghouse, relocation of the bracket, new TV,etc.).

Warning

•Be awarethat the brackets areonly suitable forwallmounting.

•Before installation,check thatthe wall you have chosen is suitable for the weighttobemounted. Also

make sure that thereare no electric, water, gas or other lines running through the wall at the mounting

site.

Note -Fischer plugs

The Fischer plugs supplied areapproved for the following building materials:

•Concrete

•Plasterboardand gypsum breboard

•Vertical perforated brick

•Lightweight concrete hollow block

•Hollow brick andconcrete ceilings

•Perforated sand-lime brick

•Solid sand-lime brick

•Natural stone

•Aerated concrete

•Chipboard

•Solid plaster boards

•Lightweight concrete solid block

•Solid brick

8mm

6.1 Mounting on the wall

6.1.1 Preparing the intended mounting surface

Get support and help from other people for the following assemblysteps.

8mm

60 mm

Ø8mm

•First use the bracket as atemplateand re-measureifnecessary to ensure thatthe position is correct. Use a

spirit level to checkthe horizontaland verticalalignment of the bracket on the wall.Now mark the holeson

the wall.

•To attach the wallbracket tothe wall,you need adrilland adrilling attachment with adiameterof8mm.

Make sure that the drilling attachment is suitable for the intended wall. Thedepth of the holeshould be

60mm .

•To ensureasecurehold, vacuum outthe drillholes with avacuum nozzlesothatthe drillhole is free of drill

dust. Now insert the plug [A2] intothe drillhole so that it is ush with the hole.

6.1.2 Attachingthe wall bracket

•Attach the wallbracket tothe wall as shown above usingthe enclosed mounting material ([A2] plug, [A3] M6

washer,[A1] 6x50 mm screwand the [F1]spirit level).

6.2 Mounting on the TV set

Note

•Given the multitude of terminaldevices structures available on the market,wecannot describe allpossible

mounting options here.

•Please ensurethat the bracket lays at and evenly on the back of the television.

•Use the enclosed spacer to even out any unevenness on the backofthe television.

•Ensurethat allscrews have the proper lengthand can be mounted untiltheyare hand-tight.

6.2.1 Mounting the VESAplateonthe back of the TV set

B2, B3

C1,C2,

D1,D2,

D3,D4,

E1, E2

Curved TV back

C2, D2, D4,E2B1B2

D3, D4 B3

M8x50M8x45 (D4)Ø8x5

Flat TV back

C1,D1, D4,E1B1

Youdonot need a

washerfor theD-screws

•Mount the VESA armsthe backofyour TV set.

•Note the combination of screw,washer and spacer listed above for your at or curved TV.

Table des matières

Autres manuels Hama Support et étagère

Hama

Hama 00096007 Manuel utilisateur

Hama

Hama LCD/TFT - Monitor Arm Manuel utilisateur

Hama

Hama Easy Snap Manuel utilisateur

Hama

Hama Smart Grip 2 Manuel utilisateur

Hama

Hama Universal Stand Manuel utilisateur

Hama

Hama 00118610 Manuel utilisateur

Hama

Hama 118495 Manuel utilisateur

Hama

Hama 00118685 Manuel utilisateur

Hama

Hama 118099 Manuel utilisateur

Hama

Hama 00118680 Manuel utilisateur

Hama

Hama 095819 Manuel utilisateur

Hama

Hama D3012010 Manuel utilisateur

Hama

Hama 118496 Manuel utilisateur

Hama

Hama Cordoba 00096159 Manuel utilisateur

Hama

Hama 118490 Manuel utilisateur

Hama

Hama 182543 Manuel utilisateur

Hama

Hama 106337 Manuel utilisateur

Hama

Hama TV WALL BRACKETS Manuel utilisateur

Hama

Hama 00048208 Manuel utilisateur

Hama

Hama 00182580 Manuel utilisateur

Hama

Hama 108720 Manuel utilisateur

Hama

Hama Selector 50FX Manuel utilisateur

Hama

Hama 108789 Manuel utilisateur

Hama

Hama 00200759 Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur