Hall Technologies ULTRA-4K Manuel utilisateur
Hall Technologies June 18, 2023 Page 1 of 14
Hall Technologies • 1234 Lakeshore Dr Suite #150 Coppell, TX 75019 • halltechav.com
ULTRA-4K
Dual 4K UHD, HDMI, and, & USB 2.0 Extender over a single CAT6 to 100m/328ft with 3-port splitter,
sender, and Daisy-Chainable receiver
USER MANUAL
July 18, 2023
Hall Technologies June 18, 2023 Page 2 of 14
Important Safety Instructions
1. Do not expose this apparatus to rain, moisture, dripping or
splashing and that no objects filled with liquids, such as
vases, shall be placed on the apparatus.
2. Do not install or place this unit in a bookcase, built-in
cabinet or in another confined space. Ensure the unit is well
ventilated.
3. To prevent risk of electric shock or fire hazard due to
overheating, do not obstruct the unit’s ventilation openings
with newspapers, tablecloths, curtains, and similar items.
4. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
5. Do not place sources of naked flames, such as lighted
candles, on the unit.
6. Clean this apparatus only with dry cloth.
7. Unplug this apparatus during lightning storms or when
unused for long periods of time.
8. Protect the power cord from being walked on or pinched
particularly at plugs.
9. Only use attachments / accessories specified by the
manufacturer.
10. Refer all servicing to qualified service personnel.
Hall Technologies June 18, 2023 Page 3 of 14
Table of Contents
Introduction ............................................................................................................................................... 4
Overview ........................................................................................................................................ 4
Features .......................................................................................................................................... 5
Package Contents ....................................................................................................................................... 6
Setup .......................................................................................................................................................... 6
Installation ...................................................................................................................................... 7
Connectors & Indicators ............................................................................................................................. 8
ULTRA-4K-S (front) .......................................................................................................................... 8
ULTRA-4K-S (back) .......................................................................................................................... 9
ULTRA-4K-R (front) ....................................................................................................................... 10
ULTRA-4K-R (back) ........................................................................................................................ 11
Troubleshooting ....................................................................................................................................... 11
Specifications ...................................................................................................................................... 12-13
Hall Technologies June 18, 2023 Page 4 of 14
Introduction
OVERVIEW
The ULTRA-4K is comprised of the ULTRA-4K-S Sender and the ULTRA- 4K-R Receiver. The system is
used to extend USB 2.0 and dual display HDMI video supporting various resolutions including 1080p @
60 Hz and 4K UHD @ 30 Hz. Dual video and USB can be extended to one or more Receivers up to a
distance of 100 m (328 ft.) over a single CAT6 cable.
The Sender features two HDMI inputs and one USB input for connection to a dual-head PC. It provides
two local HDMI outputs (corresponding to the two HDMI inputs) and features an internal USB hub with
two local USB outputs. Additionally, there are three separate RJ45 output ports to extend video and
USB to multiple remote locations.
The Receiver provides two HDMI outputs and 6 USB ports. Two of the USB ports are labeled for use
with keyboard and mouse; however, they can also be connected to other USB devices such as KVM
switches or touchscreen displays if desired.
For connection of other USB devices such as printers or scanners, four additional general-purpose USB
2.0 ports are available. For security purposes, USB memory devices are not supported by default. If you
want to enable USB memory support, please contact Hall Technologies.
In a setup with one sender going to only one Receiver, the USB ports automatically pair with the
Sender. However, when there are more than one ULTRA-4K Receiver connected to the same sender,
only one Receiver can be paired at a given time. Pairing is accomplished using a push button on the
front panel of the Receiver. A corresponding LED next to the button indicates USB pairing status with
the Sender.
Each Receiver features an RJ45 “LINK OUT” port that can be daisy- chained to down-stream Receivers.
All signals are re-buffered, so the LINK OUT port can drive cables to 100 meters long.
It is important to note that the RJ45 output ports (on the Sender or the Receiver), can also be
connected to ULTRA-V Receivers. ULTRA-V Receivers provide only one video output and no USB. The
ULTRA-V Receivers show Video A by default; however, they can be configured to display Video B if
desired. Please refer to the ULTRA-V User’s Manual for further details.
Hall Technologies June 18, 2023 Page 5 of 14
Typical Connection Diagram
FEATURES
! Supports high resolution HDMI video including FHD. (1920x1080), WQUD (2560x1440), and 4K UHD
(3840x2160)
! Two video streams and one USB port extended over a single CAT6 cable up to 100 m/328ft.
! Full plug-and-play support with USB keyboard, mouse, and connected peripherals.
! Computer OS independent – No driver or software required.
! Local HDMI and USB output on the Sender
! Three Sender extension outputs and one Receiver daisy-chain output to distribute video to multiple
locations.
! No video calibration required, no video quality reduction due to cable length or resolution.
! Locking power supply connector to prevent inadvertent disconnection.
! Sender includes mounting ears for standard 19” rack; Receiver includes mounting brackets for
surface mounting.
Hall Technologies June 18, 2023 Page 6 of 14
Package Contents
ULTRA-4K-S
! 1x ULTRA-4K-S
! 2x Rack mount ears and screws
! 1x power supply (Hall P/N 511-IEC5V4AP5L, MFG P/N 3A-186DB05)
! 1x user manual card
ULTRA-4K-R
! 1x ULTRA-4K-R
! 2x Surface-mount brackets
! 1x power supply (Hall P/N 511-IEC5V4AP5L, MFG P/N 3A-186DB05)
! 1x user manual card
Setup
INSTALLATION
• Connect the PC HDMI outputs to the ULTRA-4K-S ports marked “HDMI A IN” and “HDMI B IN”
using quality HDMI cables.
• Connect the PC USB to the ULTRA-4K-S port marked “USB IN” using a USB cable.
• Optionally, connect HDMI displays to HDMI A/B OUT ports, and USB peripherals to the USB
LOCAL ports.
• Using a CAT6 able, connect the ULTRA-4K-S “link out” port to the ULTRA-4K-R “link in” port.
• Connect remote HDMI displays to the ULTRA-4K-R HDMI A and HDMI B output ports.
• Connect keyboard, mouse, KVM Switch, or touchscreens to the ULTRA-4K-R ports marked as
KBRD/MOUSE
• Optionally, connect other USB devices to any of the USB 2.0 ports.
• Optionally, connect external speakers to “audio out” to use audio from “HDMI A” or “AUDIO
INPUT” of ULTRA-4K-R.
Hall Technologies June 18, 2023 Page 7 of 14
INSTALLATION
While HDMI is the most widely adopted video standard, there are a number of computer and display
manufacturers that rely on DisplayPort for higher resolutions such as 2560 or 4K. Hall Technologies
offers 4K compatible adapters to convert between these two video standards.
*Note: These adapters are unidirectional. For example, the DisplayPort to HDMI adapter cannot
convert a HDMI signal to DisplayPort.
To connect to a source (PC) with DisplayPort output, use GC-DP-HD.
Model GC-DP-HD: DisplayPort source to HDMI output
Virtually all monitor and TV’s have HDMI (or DVI) inputs. But if your display only has a display port
input, the following adapter convers HDMI to DP.
Model GC-DP-HD: DisplayPort source to HDMI output
Hall Technologies June 18, 2023 Page 8 of 14
Connectors & Indicators
ULTRA-4K-S Front
No.
Name
Description
1
SERVICE
• USB-Mini connection, used for upgrading firmware or configuring parameters such as
EDID via free PC GUI.
2
USB HUB
• LEDs show presence of USB input and local devices. The Hub LED indicates that the
hub is active (not that PC/Host has the ability to put the hub in “selective suspend”
mode in which case the Hub LED will turn off. Hosts usually do this if no downstream
devices are connected to the hub. The Port 1 and 2 LEDs correspond to the two USB
(type A) ports available on the rear panel. They should be on if there is a USB device
connected to them.
3
VID/LINK
• Status indicators of HDMI A/B
- VID: This LED is lit when HDMI video input is present.
- ACT: This LED blinks when HDMI extender core processor is active (normal)
4
POWER
• Power LED lights when power is supplied.
Hall Technologies June 18, 2023 Page 9 of 14
ULTRA-4K-S Back
No.
Name
Description
1
HDMI A IN/OUT
HDMI A input port and local output. HDMI A IN is extended to ULTRA-4K-R HDMI A
OUTPUT.
2
HDMI B IN/OUT
HDMI B input port and local output. HMDI B IN is extended to ULTRA-4K-R HDMI B
OUTPUT.
3
USB
IN/LOCAL1/LOCAL2
USB input port, and local outputs. USB IN is extended to ULTRA-4K-R USB 1.1/USB 2.0
ports.
4
REMOTE
OUTPUTS/LINK
1/LINK2/LINK3
Three separate outputs for connection to remote ULTRA-4K-R receivers. Use CAT6 cable
to extend up to 100 m/328 ft.
- GREEN LED on left side of ports indicates an active link to ULTRA-4K-R or
ULTRA-V-R.
5
5V DC
Power input. Connect supplied 5V DC locking power supply to power sender.
Hall Technologies June 18, 2023 Page 10 of 14
ULTRA-4K-R Front
No.
Name
Description
1
SERVICE
• USB-Mini connection, used for upgrading firmware or configuring parameters such as
USB Mass Storage Class device filtering via free PC GUI.
2
USB 2.0 PAIRING
• When only one receiver is connected to a sender, the receiver will automatically pair
by default and then the PAIRING LED will be on. If multiple receivers are connected,
the user needs to decide which receivers USB ports is to be paired with the sender.
To change pairing to a different receiver, press the button and the PAIRING LED will
light. If the pairing LED is solidly lit, the receiver has successfully paired with the
sender, but if it is blinking, the pairing was unsuccessful, and you should press the
pairing button again until the LED is solidly lit.
3
HDMI A/B
VID/LINK
• Status indicators of HDMI A/B
- VID: This LED is lit when HDMI video is being output.
- ACT: This LED blinks when HDMI processor is active (normal)
- LINK: This LED indicates the system is actively receiving video and data. Blinks if
system is not receiving video.
4
POWER
• Power LED lights when power is supplied.
Table des matières
Autres manuels Hall Technologies Extenseur
Hall Technologies
Hall Technologies LYNX Series Manuel utilisateur
Hall Technologies
Hall Technologies U2-DR1 Manuel utilisateur
Hall Technologies
Hall Technologies HT-AIM-70 Manuel utilisateur
Hall Technologies
Hall Technologies LYNX Series Manuel utilisateur
Hall Technologies
Hall Technologies FXT-460 Manuel utilisateur
Hall Technologies
Hall Technologies HT-Gemini Manuel utilisateur
Hall Technologies
Hall Technologies HT-ASTRO2-4 Manuel utilisateur
Hall Technologies
Hall Technologies GEM-EX-S Manuel utilisateur
Hall Technologies
Hall Technologies UH18 Manuel utilisateur
Hall Technologies
Hall Technologies HT-AIM-100 Manuel utilisateur
